[Thu Aug 30 10:59:12 2012] Detection parameters:
  Position = (253.9, 204.3) = 21 59 0.83 -30 19 23.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.3 +/- 14.6
  Background counts = 55.3
  Rate = 0.001 +/- 0.0002

[Thu Aug 30 10:59:12 2012] Off-axis axis estimate = 7.55'
[Thu Aug 30 11:20:31 2012] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 11:20:31 2012] Initial guess for spatial extent in simple fitting = 10.20"
[Thu Aug 30 11:20:31 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.111
[Thu Aug 30 11:20:31 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 10.20"
[Thu Aug 30 11:59:03 2012] fullrun_mos1_xmm0124930501_pi300-10000_cl_pass0_src23.ximg exists
[Thu Aug 30 11:59:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124930501_pi300-10000_cl_pass0_src23.csv
[Thu Aug 30 11:59:03 2012] fullrun_mos1_xmm0124930501_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu Aug 30 11:59:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124930501_pi300-10000_cl_pass0_src23.csv
[Thu Aug 30 11:59:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124930501_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124930501_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 11:59:03 2012] fullrun_mos1_xmm0124930501_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu Aug 30 11:59:03 2012] fullrun_mos1_xmm0124930501_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Aug 30 11:59:03 2012] Fit fullrun_mos1_xmm0124930501_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Thu Aug 30 12:38:29 2012] Spatial fit model total counts = 775.983000, observed total counts = 776.000000
[Thu Aug 30 12:38:29 2012] Offset between fit and detection position for source 24 = 0.266321 pixels
[Thu Aug 30 12:38:29 2012] Warning, changing simple spatial fit ID from 23 to 21
[Thu Aug 30 12:38:29 2012] 755.991600 total counts/ 715.902000 bgd. counts: snr = 1.498321
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.266321 pixels
  Position = (254.1, 204.2) = 21 59 0.75 -30 19 23.4
  Extent = 4.3 (2.8-7.8)", rotation angle = 0
  Source counts = 40.1 +/- 27.5
  Background counts = 715.9
  Rate = 0.0004 +/- 0.0003
  Deleting source due to low Poisson probability