[Thu Jun 21 14:17:54 2012] Detection parameters:
  Position = (168.9, 261.0) = 13 1 18.50 28 20 47.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.5 +/- 13.4
  Background counts = 24.7
  Rate = 0.003 +/- 0.0006

[Thu Jun 21 14:17:55 2012] Off-axis axis estimate = 9.78'
[Thu Jun 21 14:21:05 2012] Using EEF radius (= 11.32 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 14:21:05 2012] Initial guess for spatial extent in simple fitting = 11.32"
[Thu Jun 21 14:21:05 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.935
[Thu Jun 21 14:21:05 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 11.32"
[Thu Jun 21 15:54:21 2012] fullrun_pn_xmm0124712501_pi300-10000_cl_pass0_src45.ximg exists
[Thu Jun 21 15:54:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0124712501_pi300-10000_cl_pass0_src45.csv
[Thu Jun 21 15:54:21 2012] fullrun_pn_xmm0124712501_pi300-10000_cl_pass0_src45_1.ximg exists
[Thu Jun 21 15:54:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0124712501_pi300-10000_cl_pass0_src45.csv
[Thu Jun 21 15:54:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0124712501_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0124712501_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 15:54:21 2012] fullrun_pn_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Thu Jun 21 15:54:21 2012] fullrun_pn_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Thu Jun 21 15:54:21 2012] Fit fullrun_pn_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Thu Jun 21 17:52:24 2012] Warning, spatial fit 45 centroid is now closest to src. 2
[Thu Jun 21 17:52:24 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 17:52:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 17:52:24 2012] Assessing source extent using major
[Thu Jun 21 17:52:24 2012] Source does appear to be extended
[Thu Jun 21 17:52:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 17:52:56 2012] Using EEF radius (= 11.32 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 17:52:56 2012] Initial guess for spatial extent in simple fitting = 11.32"
[Thu Jun 21 17:52:56 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.935
[Thu Jun 21 17:52:56 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 11.32"
[Thu Jun 21 19:12:59 2012] fullrun_pn_xmm0124712501_pi300-10000_cl_pass1_src42.ximg exists
[Thu Jun 21 19:12:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0124712501_pi300-10000_cl_pass1_src42.csv
[Thu Jun 21 19:12:59 2012] fullrun_pn_xmm0124712501_pi300-10000_cl_pass1_src42_1.ximg exists
[Thu Jun 21 19:12:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0124712501_pi300-10000_cl_pass1_src42.csv
[Thu Jun 21 19:12:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0124712501_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0124712501_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 19:13:00 2012] fullrun_pn_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Thu Jun 21 19:13:00 2012] fullrun_pn_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Thu Jun 21 19:13:00 2012] Fit fullrun_pn_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src42 appears to have run properly
[Thu Jun 21 20:37:55 2012] Source 46 is offset by 4.168930 and -8.267796 pixels which is larger than
2 X fitted extent = 3.178589 x 3.178589, not incorporating fit results
[Thu Jun 21 20:37:55 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 20:37:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 20:37:55 2012] Assessing source extent using major
[Thu Jun 21 20:37:55 2012] Source does appear to be extended
[Thu Jun 21 20:37:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 20:38:26 2012] XMMSAS src. selection expression = ellipse(14642.282883, 22656.277740, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 21 20:38:26 2012] Writing source region out to fullrun_pn_xmm0124712501_pi300-10000_pass1_cl_src46_src.reg
[Thu Jun 21 20:38:26 2012] Extracting stamp from image fullrun_pn_xmm0124712501_pi300-10000_cl_sm2.00.img.gz, (131, 223) - (206, 298)
[Thu Jun 21 20:38:26 2012] XMMSAS bgd. selection expression = annulus(14642.282883, 22656.277740, 1087.500000, 2175.000000, X, Y) && !ellipse(14187.240400, 23603.004200, 476.752014, 476.752014, 0.000000, X, Y) && !ellipse(17444.200348, 20719.021011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14358.474854, 20557.260696, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 20:38:26 2012] Writing fullrun_pn_xmm0124712501_pi300-10000_pass1_cl_src46.gif
[Thu Jun 21 21:08:52 2012] Mean detx,y = (-11721.20, -3495.26) 
[Thu Jun 21 21:08:55 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 21:09:22 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 21:09:22 2012] Setting source spectrum file to fullrun_pn_xmm0124712501_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Thu Jun 21 21:09:22 2012] Setting bgd. spectrum file to fullrun_pn_xmm0124712501_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Thu Jun 21 21:36:24 2012] Not generating rmf since there are only 72 counts
[Thu Jun 21 21:36:24 2012] rmf not generated due to insufficient counts
[Thu Jun 21 22:44:22 2012] Updating aperture counts using extracted products
[Thu Jun 21 22:44:22 2012] Error reading totcts from fullrun_pn_xmm0124712501_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Thu Jun 21 22:44:23 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 22:44:23 2012] Using photon index=1.80, rate=0.00303, arf fullrun_pn_xmm0124712501_pi300-10000_pass1_cl_src46.arf
[Thu Jun 21 22:44:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 22:44:23 2012] Updating source flux to 1.8e-14
[Thu Jun 21 22:46:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting