[Thu Jun 21 14:17:52 2012] Detection parameters:
  Position = (339.5, 305.1) = 13 0 22.24 28 24 0.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26038.1 +/- 196.1
  Background counts = 53.7
  Rate = 1 +/- 0.01

[Thu Jun 21 14:17:55 2012] Off-axis axis estimate = 3.02'
[Thu Jun 21 14:21:05 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 14:21:05 2012] Initial guess for spatial extent in simple fitting = 7.94"
[Thu Jun 21 14:21:05 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.925
[Thu Jun 21 14:21:05 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.94"
[Thu Jun 21 15:54:20 2012] fullrun_pn_xmm0124712501_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 21 15:54:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0124712501_pi300-10000_cl_pass0_src1.csv
[Thu Jun 21 15:54:20 2012] fullrun_pn_xmm0124712501_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 21 15:54:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0124712501_pi300-10000_cl_pass0_src1.csv
[Thu Jun 21 15:54:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0124712501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0124712501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 15:54:21 2012] fullrun_pn_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 21 15:54:21 2012] fullrun_pn_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 21 15:54:21 2012] Fit fullrun_pn_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun 21 17:52:24 2012] Spatial fit model total counts = 23326.000000, observed total counts = 23326.000000
[Thu Jun 21 17:52:24 2012] Offset between fit and detection position for source 1 = 0.125698 pixels
[Thu Jun 21 17:52:24 2012] 23352.450000 total counts/ 4652.050000 bgd. counts: snr = 274.175541
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.125698 pixels
  Position = (339.5, 305.3) = 13 0 22.25 28 24 0.8
  Extent = 6.0 (5.9-6.0)", rotation angle = 0
  Source counts = 18700.4 +/- 152.8
  Background counts = 4652.1
  Rate = 0.8 +/- 0.006
[Thu Jun 21 17:52:24 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 17:52:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 17:52:24 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 17:52:24 2012] Source does appear to be extended
[Thu Jun 21 17:52:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 17:52:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 21 17:52:56 2012] Initial guess for spatial extent in simple fitting = 5.95"
[Thu Jun 21 17:52:56 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.859
[Thu Jun 21 17:52:56 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.95"
[Thu Jun 21 19:12:59 2012] fullrun_pn_xmm0124712501_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 21 19:12:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0124712501_pi300-10000_cl_pass1_src1.csv
[Thu Jun 21 19:12:59 2012] fullrun_pn_xmm0124712501_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 21 19:12:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0124712501_pi300-10000_cl_pass1_src1.csv
[Thu Jun 21 19:12:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0124712501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0124712501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 19:12:59 2012] fullrun_pn_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 21 19:12:59 2012] fullrun_pn_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 21 19:12:59 2012] Fit fullrun_pn_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun 21 20:37:55 2012] Spatial fit model total counts = 23366.300000, observed total counts = 23359.000000
[Thu Jun 21 20:37:55 2012] Offset between fit and detection position for source 1 = 0.014700 pixels
[Thu Jun 21 20:37:55 2012] 23318.010000 total counts/ 4590.310000 bgd. counts: snr = 276.416164
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.014700 pixels
  Position = (339.5, 305.3) = 13 0 22.25 28 24 0.8
  Extent = 6.0 (5.9-6.0)", rotation angle = 0
  Source counts = 18727.7 +/- 152.7
  Background counts = 4590.3
  Rate = 0.8 +/- 0.006
[Thu Jun 21 20:37:55 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 20:37:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 20:37:55 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 20:37:55 2012] Source does appear to be extended
[Thu Jun 21 20:37:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 20:38:25 2012] Counts = 18727.700000, rescaling region sizes by 3.000000
[Thu Jun 21 20:38:25 2012] XMMSAS src. selection expression = ellipse(29491.890000, 26509.874400, 1072.557031, 1072.557031, 0.000000, X, Y)
[Thu Jun 21 20:38:25 2012] Writing source region out to fullrun_pn_xmm0124712501_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 21 20:38:25 2012] Extracting stamp from image fullrun_pn_xmm0124712501_pi300-10000_cl_sm2.00.img.gz, (278, 244) - (401, 367)
[Thu Jun 21 20:38:25 2012] XMMSAS bgd. selection expression = annulus(29491.890000, 26509.874400, 5362.785154, 10725.570309, X, Y) && !ellipse(19268.201492, 21350.717529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27837.105438, 33865.214050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22447.742400, 30376.432400, 437.872813, 437.872813, 0.000000, X, Y) && !ellipse(32742.386230, 15015.437958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21896.367203, 22494.830719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24176.595200, 35557.371400, 368.591211, 368.591211, 0.000000, X, Y) && !ellipse(24999.130000, 34630.276000, 1645.064047, 1645.064047, 0.000000, X, Y) && !ellipse(35258.634491, 34798.040009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27204.585400, 32581.451200, 386.809611, 386.809611, 0.000000, X, Y) && !ellipse(31768.311200, 29468.328600, 371.290411, 371.290411, 0.000000, X, Y) && !ellipse(29420.049835, 29522.202087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34059.461920, 28727.810200, 347.901610, 347.901610, 0.000000, X, Y) && !ellipse(23311.934570, 27656.879395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33326.755524, 27178.089996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31480.052551, 27237.180328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21132.255200, 26941.789800, 405.870412, 405.870412, 0.000000, X, Y) && !ellipse(40849.080109, 26722.163055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34250.522522, 26603.331909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22702.002655, 25689.449585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21001.084686, 25462.545471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35747.074921, 25196.652252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21690.720000, 24012.425200, 599.437617, 599.437617, 0.000000, X, Y) && !ellipse(32820.445400, 20138.005400, 433.847212, 433.847212, 0.000000, X, Y) && !ellipse(25477.023346, 16907.488831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23236.149414, 16832.650192, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 20:38:25 2012] Writing fullrun_pn_xmm0124712501_pi300-10000_pass1_cl_src1.gif
[Thu Jun 21 20:38:44 2012] Mean detx,y = (2025.81, 3364.87) 
[Thu Jun 21 20:38:51 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 20:43:31 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 20:43:31 2012] Setting source spectrum file to fullrun_pn_xmm0124712501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 21 20:43:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0124712501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 21 22:44:22 2012] Updating aperture counts using extracted products
[Thu Jun 21 22:44:22 2012] Error reading totcts from fullrun_pn_xmm0124712501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 21 22:44:22 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 22:44:22 2012] Using photon index=1.80, rate=0.783, arf fullrun_pn_xmm0124712501_pi300-10000_pass1_cl_src1.arf
[Thu Jun 21 22:44:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 22:44:22 2012] Updating source flux to 2.2e-12
[Thu Jun 21 22:47:36 2012] Reading fit data from xmm0124712501/analysis//spectral/fullrun_pn_xmm0124712501_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jun 21 22:47:36 2012] Spectral fit parameter nH value = 595976000000.0
[Thu Jun 21 22:47:36 2012] Spectral fit parameter PhoIndex value = 2.07594
[Thu Jun 21 22:47:36 2012] Failed to get F(0.3-8.0) from xmm0124712501/analysis//spectral/fullrun_pn_xmm0124712501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jun 21 22:47:36 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 22:47:36 2012] Using Nh = 6e+11, photon index=2.08, rate=0.783, arf fullrun_pn_xmm0124712501_pi300-10000_pass1_cl_src1.arf
[Thu Jun 21 22:47:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 22:47:36 2012] Updating source flux to 1.8e-12