[Thu Jun 21 14:19:03 2012] Detection parameters:
  Position = (289.4, 128.2) = 13 0 38.78 28 11 10.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.8 +/- 9.7
  Background counts = 12.0
  Rate = 0.001 +/- 0.0003

[Thu Jun 21 14:19:03 2012] Off-axis axis estimate = 12.36'
[Thu Jun 21 16:48:24 2012] Using EEF radius (= 12.61 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 16:48:24 2012] Initial guess for spatial extent in simple fitting = 12.61"
[Thu Jun 21 16:48:24 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.061
[Thu Jun 21 16:48:24 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 12.61"
[Thu Jun 21 17:52:08 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src29.ximg exists
[Thu Jun 21 17:52:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src29.csv
[Thu Jun 21 17:52:08 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src29_1.ximg exists
[Thu Jun 21 17:52:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src29.csv
[Thu Jun 21 17:52:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 17:52:08 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Thu Jun 21 17:52:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src29.csv
[Thu Jun 21 17:52:08 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Thu Jun 21 17:52:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src29.csv
[Thu Jun 21 17:52:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 17:52:39 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 15.403576 pixels away
[Thu Jun 21 17:52:40 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 17:52:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 17:52:40 2012] Assessing source extent using major
[Thu Jun 21 17:52:40 2012] Source does appear to be extended
[Thu Jun 21 17:52:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 19:58:05 2012] Using EEF radius (= 12.61 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 19:58:05 2012] Initial guess for spatial extent in simple fitting = 12.61"
[Thu Jun 21 19:58:05 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.061
[Thu Jun 21 19:58:05 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 12.61"
[Thu Jun 21 20:37:41 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src28.ximg exists
[Thu Jun 21 20:37:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src28.csv
[Thu Jun 21 20:37:41 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src28_1.ximg exists
[Thu Jun 21 20:37:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src28.csv
[Thu Jun 21 20:37:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 20:37:42 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Thu Jun 21 20:37:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src28.csv
[Thu Jun 21 20:37:42 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Thu Jun 21 20:37:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src28.csv
[Thu Jun 21 20:37:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 20:38:02 2012] Warning, spatial fit 28 centroid is now closest to src. 31
[Thu Jun 21 20:38:08 2012] Spatial fit model total counts = 221.566000, observed total counts = 193.000000
[Thu Jun 21 20:38:08 2012] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 21 20:38:08 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 20:38:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 20:38:08 2012] Assessing source extent using major
[Thu Jun 21 20:38:08 2012] Source does appear to be extended
[Thu Jun 21 20:38:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 22:03:38 2012] XMMSAS src. selection expression = ellipse(25128.436584, 11104.549271, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 21 22:03:38 2012] Writing source region out to fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src31_src.reg
[Thu Jun 21 22:03:38 2012] Extracting stamp from image fullrun_mos2_xmm0124712501_pi300-10000_cl_sm2.00.img.gz, (252, 91) - (327, 166)
[Thu Jun 21 22:03:38 2012] XMMSAS bgd. selection expression = annulus(25128.436584, 11104.549271, 1087.500000, 2175.000000, X, Y)
[Thu Jun 21 22:03:38 2012] Writing fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src31.gif
[Thu Jun 21 22:20:23 2012] Mean detx,y = (11337.62, -12296.55) 
[Thu Jun 21 22:20:24 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 22:20:43 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 22:20:43 2012] Setting source spectrum file to fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu Jun 21 22:20:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Thu Jun 21 22:43:38 2012] Not generating rmf since there are only 30 counts
[Thu Jun 21 22:43:38 2012] rmf not generated due to insufficient counts
[Thu Jun 21 22:44:25 2012] Updating aperture counts using extracted products
[Thu Jun 21 22:44:25 2012] Error reading totcts from fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu Jun 21 22:44:26 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 22:44:26 2012] Using photon index=1.80, rate=0.0011, arf fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src31.arf
[Thu Jun 21 22:44:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 22:44:26 2012] Updating source flux to 3.7e-14
[Thu Jun 21 22:45:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting