[Thu Jun 21 14:19:01 2012] Detection parameters:
  Position = (222.0, 245.9) = 13 1 0.99 28 19 42.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 202.4 +/- 18.0
  Background counts = 12.8
  Rate = 0.01 +/- 0.001

[Thu Jun 21 14:19:03 2012] Off-axis axis estimate = 6.73'
[Thu Jun 21 16:48:24 2012] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 16:48:24 2012] Initial guess for spatial extent in simple fitting = 9.79"
[Thu Jun 21 16:48:24 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.189
[Thu Jun 21 16:48:24 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.79"
[Thu Jun 21 17:52:07 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src4.ximg exists
[Thu Jun 21 17:52:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src4.csv
[Thu Jun 21 17:52:07 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Jun 21 17:52:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src4.csv
[Thu Jun 21 17:52:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 17:52:08 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Jun 21 17:52:08 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Jun 21 17:52:08 2012] Fit fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Jun 21 17:52:39 2012] Spatial fit model total counts = 328.973000, observed total counts = 329.000000
[Thu Jun 21 17:52:39 2012] Offset between fit and detection position for source 3 = 0.059362 pixels
[Thu Jun 21 17:52:39 2012] 328.202000 total counts/ 198.247000 bgd. counts: snr = 9.229745
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.059362 pixels
  Position = (222.0, 245.9) = 13 1 0.97 28 19 42.4
  Extent = 5.0 (4.1-6.1)", rotation angle = 0
  Source counts = 130.0 +/- 18.1
  Background counts = 198.2
  Rate = 0.005 +/- 0.0006
[Thu Jun 21 17:52:39 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 17:52:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 17:52:39 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 17:52:39 2012] Source does appear to be extended
[Thu Jun 21 17:52:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 19:58:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 21 19:58:04 2012] Initial guess for spatial extent in simple fitting = 4.96"
[Thu Jun 21 19:58:04 2012] source mask rpix=1.1, npix_max = 10, mask sum = 16, frac = 1.487
[Thu Jun 21 19:58:04 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 4.96"
[Thu Jun 21 20:37:41 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src4.ximg exists
[Thu Jun 21 20:37:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src4.csv
[Thu Jun 21 20:37:41 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Jun 21 20:37:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src4.csv
[Thu Jun 21 20:37:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 20:37:41 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Jun 21 20:37:41 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Jun 21 20:37:41 2012] Fit fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Jun 21 20:38:08 2012] Spatial fit model total counts = 328.971000, observed total counts = 329.000000
[Thu Jun 21 20:38:08 2012] Offset between fit and detection position for source 3 = 0.000137 pixels
[Thu Jun 21 20:38:08 2012] 328.202000 total counts/ 198.202000 bgd. counts: snr = 9.233989
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000137 pixels
  Position = (222.0, 245.9) = 13 1 0.97 28 19 42.4
  Extent = 5.0 (4.1-6.1)", rotation angle = 0
  Source counts = 130.0 +/- 18.1
  Background counts = 198.2
  Rate = 0.005 +/- 0.0006
[Thu Jun 21 20:38:08 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 20:38:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 20:38:08 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 20:38:08 2012] Source does appear to be extended
[Thu Jun 21 20:38:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 22:03:38 2012] XMMSAS src. selection expression = ellipse(19268.566780, 21345.051000, 297.810009, 297.810009, 0.000000, X, Y)
[Thu Jun 21 22:03:38 2012] Writing source region out to fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src3_src.reg
[Thu Jun 21 22:03:38 2012] Extracting stamp from image fullrun_mos2_xmm0124712501_pi300-10000_cl_sm2.00.img.gz, (205, 229) - (239, 263)
[Thu Jun 21 22:03:38 2012] XMMSAS bgd. selection expression = annulus(19268.566780, 21345.051000, 496.350014, 992.700029, X, Y)
[Thu Jun 21 22:03:38 2012] Writing fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src3.gif
[Thu Jun 21 22:13:57 2012] Mean detx,y = (9215.64, -794.78) 
[Thu Jun 21 22:13:58 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 22:14:05 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 22:14:05 2012] Setting source spectrum file to fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jun 21 22:14:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Jun 21 22:44:25 2012] Updating aperture counts using extracted products
[Thu Jun 21 22:44:25 2012] Error reading totcts from fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jun 21 22:44:25 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 22:44:25 2012] Using photon index=1.80, rate=0.00465, arf fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src3.arf
[Thu Jun 21 22:44:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 22:44:25 2012] Updating source flux to 1e-13