[Thu Jun 21 14:19:01 2012] Detection parameters:
  Position = (313.8, 375.1) = 13 0 30.73 28 29 3.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.4 +/- 8.8
  Background counts = 15.1
  Rate = 0.001 +/- 0.0004

[Thu Jun 21 14:19:03 2012] Off-axis axis estimate = 5.67'
[Thu Jun 21 16:48:24 2012] Using EEF radius (= 9.26 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 16:48:24 2012] Initial guess for spatial extent in simple fitting = 9.26"
[Thu Jun 21 16:48:24 2012] source mask rpix=2.1, npix_max = 27, mask sum = 28, frac = 1.012
[Thu Jun 21 16:48:24 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 9.26"
[Thu Jun 21 17:52:08 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src26.ximg exists
[Thu Jun 21 17:52:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src26.csv
[Thu Jun 21 17:52:08 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src26_1.ximg exists
[Thu Jun 21 17:52:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src26.csv
[Thu Jun 21 17:52:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 17:52:08 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Thu Jun 21 17:52:08 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Thu Jun 21 17:52:08 2012] Fit fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Thu Jun 21 17:52:39 2012] Spatial fit model total counts = 216.354000, observed total counts = 220.000000
[Thu Jun 21 17:52:39 2012] Offset between fit and detection position for source 23 = 0.380734 pixels
[Thu Jun 21 17:52:39 2012] 221.764100 total counts/ 199.438000 bgd. counts: snr = 1.580916
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.380734 pixels
  Position = (313.6, 374.8) = 13 0 30.81 28 29 3.2
  Extent = 4.9 (2.3-9.4)", rotation angle = 0
  Source counts = 22.3 +/- 14.9
  Background counts = 199.4
  Rate = 0.0008 +/- 0.0005
  Deleting source due to low Poisson probability