[Thu Jun 21 14:19:01 2012] Detection parameters:
  Position = (163.6, 271.9) = 13 1 20.22 28 21 35.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 402.4 +/- 24.4
  Background counts = 9.4
  Rate = 0.01 +/- 0.0009

[Thu Jun 21 14:19:03 2012] Off-axis axis estimate = 9.96'
[Thu Jun 21 16:48:24 2012] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 16:48:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 21 16:48:24 2012] Initial guess for spatial extent in simple fitting = 11.41"
[Thu Jun 21 16:48:24 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.923
[Thu Jun 21 16:48:24 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.41"
[Thu Jun 21 17:52:07 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun 21 17:52:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src3.csv
[Thu Jun 21 17:52:07 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun 21 17:52:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src3.csv
[Thu Jun 21 17:52:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 17:52:08 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun 21 17:52:08 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun 21 17:52:08 2012] Fit fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Jun 21 17:52:39 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 15.388897 pixels away
[Thu Jun 21 17:52:39 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 17:52:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 17:52:39 2012] Assessing source extent using major
[Thu Jun 21 17:52:39 2012] Source does appear to be extended
[Thu Jun 21 17:52:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 19:58:04 2012] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 19:58:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 21 19:58:04 2012] Initial guess for spatial extent in simple fitting = 11.41"
[Thu Jun 21 19:58:04 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.923
[Thu Jun 21 19:58:04 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.41"
[Thu Jun 21 20:37:41 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jun 21 20:37:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src3.csv
[Thu Jun 21 20:37:41 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jun 21 20:37:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src3.csv
[Thu Jun 21 20:37:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 20:37:41 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jun 21 20:37:41 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jun 21 20:37:41 2012] Fit fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Jun 21 20:38:08 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.502044 pixels away
[Thu Jun 21 20:38:08 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 20:38:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 20:38:08 2012] Assessing source extent using major
[Thu Jun 21 20:38:08 2012] Source does appear to be extended
[Thu Jun 21 20:38:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 22:03:38 2012] XMMSAS src. selection expression = ellipse(14187.456451, 23603.031982, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 21 22:03:38 2012] Writing source region out to fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src2_src.reg
[Thu Jun 21 22:03:38 2012] Extracting stamp from image fullrun_mos2_xmm0124712501_pi300-10000_cl_sm2.00.img.gz, (126, 234) - (201, 309)
[Thu Jun 21 22:03:38 2012] XMMSAS bgd. selection expression = annulus(14187.456451, 23603.031982, 1087.500000, 2175.000000, X, Y) && !ellipse(15436.489761, 26580.453522, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 22:03:38 2012] Writing fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src2.gif
[Thu Jun 21 22:13:42 2012] Mean detx,y = (11601.42, 4188.15) 
[Thu Jun 21 22:13:43 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 22:13:53 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 22:13:53 2012] Setting source spectrum file to fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 21 22:13:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jun 21 22:29:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 21 22:29:27 2012] rmf not generated due to insufficient counts
[Thu Jun 21 22:44:25 2012] Updating aperture counts using extracted products
[Thu Jun 21 22:44:25 2012] Error reading totcts from fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 21 22:44:25 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 22:44:25 2012] Using photon index=1.80, rate=0.0144, arf fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src2.arf
[Thu Jun 21 22:44:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 22:44:25 2012] Updating source flux to 3.5e-13
[Thu Jun 21 22:45:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting