[Thu Jun 21 14:19:01 2012] Detection parameters:
  Position = (277.9, 409.2) = 13 0 42.57 28 31 30.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.8 +/- 11.5
  Background counts = 10.6
  Rate = 0.006 +/- 0.0008

[Thu Jun 21 14:19:03 2012] Off-axis axis estimate = 8.17'
[Thu Jun 21 16:48:24 2012] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 16:48:24 2012] Initial guess for spatial extent in simple fitting = 10.51"
[Thu Jun 21 16:48:24 2012] source mask rpix=2.4, npix_max = 34, mask sum = 28, frac = 0.823
[Thu Jun 21 16:48:24 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.51"
[Thu Jun 21 17:52:07 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src7.ximg exists
[Thu Jun 21 17:52:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src7.csv
[Thu Jun 21 17:52:07 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Jun 21 17:52:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src7.csv
[Thu Jun 21 17:52:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 17:52:08 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Jun 21 17:52:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src7.csv
[Thu Jun 21 17:52:08 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Jun 21 17:52:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src7.csv
[Thu Jun 21 17:52:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 17:52:39 2012] Spatial fit model total counts = 161.330000, observed total counts = 145.000000
[Thu Jun 21 17:52:39 2012] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 21 17:52:39 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 17:52:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 17:52:39 2012] Assessing source extent using major
[Thu Jun 21 17:52:39 2012] Source does appear to be extended
[Thu Jun 21 17:52:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 19:58:04 2012] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 19:58:04 2012] Initial guess for spatial extent in simple fitting = 10.51"
[Thu Jun 21 19:58:04 2012] source mask rpix=2.4, npix_max = 34, mask sum = 28, frac = 0.823
[Thu Jun 21 19:58:04 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 10.51"
[Thu Jun 21 20:37:41 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src7.ximg exists
[Thu Jun 21 20:37:41 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu Jun 21 20:37:41 2012] Fit fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src7 appears to have run properly
[Thu Jun 21 20:37:41 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu Jun 21 20:37:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src7.csv
[Thu Jun 21 20:37:41 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu Jun 21 20:37:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src7.csv
[Thu Jun 21 20:37:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 20:38:08 2012] Source 13 is offset by 0.079677 and -5.341534 pixels which is larger than
2 X fitted extent = 4.561205 x 4.561205, not incorporating fit results
[Thu Jun 21 20:38:08 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 20:38:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 20:38:08 2012] Assessing source extent using major
[Thu Jun 21 20:38:08 2012] Source does appear to be extended
[Thu Jun 21 20:38:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 22:03:38 2012] XMMSAS src. selection expression = ellipse(24131.980194, 35552.328522, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 21 22:03:38 2012] Writing source region out to fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src13_src.reg
[Thu Jun 21 22:03:38 2012] Extracting stamp from image fullrun_mos2_xmm0124712501_pi300-10000_cl_sm2.00.img.gz, (240, 372) - (315, 447)
[Thu Jun 21 22:03:38 2012] XMMSAS bgd. selection expression = annulus(24131.980194, 35552.328522, 1087.500000, 2175.000000, X, Y)
[Thu Jun 21 22:03:38 2012] Writing fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src13.gif
[Thu Jun 21 22:14:54 2012] Mean detx,y = (-3661.82, 6859.07) 
[Thu Jun 21 22:14:55 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 22:15:21 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 22:15:22 2012] Setting source spectrum file to fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Jun 21 22:15:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu Jun 21 22:41:23 2012] Not generating rmf since there are only 84 counts
[Thu Jun 21 22:41:23 2012] rmf not generated due to insufficient counts
[Thu Jun 21 22:44:25 2012] Updating aperture counts using extracted products
[Thu Jun 21 22:44:25 2012] Error reading totcts from fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Jun 21 22:44:25 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 22:44:25 2012] Using photon index=1.80, rate=0.00578, arf fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src13.arf
[Thu Jun 21 22:44:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 22:44:25 2012] Updating source flux to 1.1e-13
[Thu Jun 21 22:45:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting