[Thu Jun 21 14:19:01 2012] Detection parameters:
  Position = (364.8, 442.6) = 13 0 13.89 28 33 58.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.3 +/- 11.1
  Background counts = 11.1
  Rate = 0.005 +/- 0.0008

[Thu Jun 21 14:19:03 2012] Off-axis axis estimate = 11.50'
[Thu Jun 21 16:48:24 2012] Using EEF radius (= 12.18 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 16:48:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 21 16:48:24 2012] Initial guess for spatial extent in simple fitting = 12.18"
[Thu Jun 21 16:48:24 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.125
[Thu Jun 21 16:48:24 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 12.18"
[Thu Jun 21 17:52:07 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src9.ximg exists
[Thu Jun 21 17:52:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src9.csv
[Thu Jun 21 17:52:07 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Jun 21 17:52:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src9.csv
[Thu Jun 21 17:52:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 17:52:08 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Jun 21 17:52:08 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Jun 21 17:52:08 2012] Fit fullrun_mos2_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Thu Jun 21 17:52:39 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 15.262285 pixels away
[Thu Jun 21 17:52:39 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 17:52:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 17:52:39 2012] Assessing source extent using major
[Thu Jun 21 17:52:39 2012] Source does appear to be extended
[Thu Jun 21 17:52:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 19:58:04 2012] Using EEF radius (= 12.18 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 19:58:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 21 19:58:04 2012] Initial guess for spatial extent in simple fitting = 12.18"
[Thu Jun 21 19:58:04 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.125
[Thu Jun 21 19:58:04 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 12.18"
[Thu Jun 21 20:37:41 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src9.ximg exists
[Thu Jun 21 20:37:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src9.csv
[Thu Jun 21 20:37:41 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Jun 21 20:37:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src9.csv
[Thu Jun 21 20:37:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 20:37:42 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Jun 21 20:37:42 2012] fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Jun 21 20:37:42 2012] Fit fullrun_mos2_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Jun 21 20:38:08 2012] Spatial fit model total counts = 176.448000, observed total counts = 176.000000
[Thu Jun 21 20:38:08 2012] Offset between fit and detection position for source 12 = 0.379119 pixels
[Thu Jun 21 20:38:08 2012] 175.575000 total counts/ 135.312000 bgd. counts: snr = 3.461290
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.379119 pixels
  Position = (364.4, 442.5) = 13 0 14.02 28 33 57.9
  Extent = 4.8 (3.6-6.5)", rotation angle = 0
  Source counts = 40.3 +/- 13.3
  Background counts = 135.3
  Rate = 0.001 +/- 0.0005
[Thu Jun 21 20:38:08 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 20:38:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 20:38:08 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 20:38:08 2012] Source does appear to be extended
[Thu Jun 21 20:38:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 22:03:38 2012] XMMSAS src. selection expression = ellipse(31654.591180, 38452.854800, 290.035208, 290.035208, 0.000000, X, Y)
[Thu Jun 21 22:03:38 2012] Writing source region out to fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src12_src.reg
[Thu Jun 21 22:03:38 2012] Extracting stamp from image fullrun_mos2_xmm0124712501_pi300-10000_cl_sm2.00.img.gz, (348, 426) - (381, 459)
[Thu Jun 21 22:03:38 2012] XMMSAS bgd. selection expression = annulus(31654.591180, 38452.854800, 483.392014, 966.784028, X, Y)
[Thu Jun 21 22:03:38 2012] Writing fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src12.gif
[Thu Jun 21 22:15:40 2012] Mean detx,y = (-11310.54, 4192.70) 
[Thu Jun 21 22:15:42 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 22:15:50 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 22:15:50 2012] Setting source spectrum file to fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jun 21 22:15:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Jun 21 22:41:44 2012] Not generating rmf since there are only 40 counts
[Thu Jun 21 22:41:44 2012] rmf not generated due to insufficient counts
[Thu Jun 21 22:44:25 2012] Updating aperture counts using extracted products
[Thu Jun 21 22:44:25 2012] Error reading totcts from fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jun 21 22:44:25 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 22:44:25 2012] Using photon index=1.80, rate=0.00144, arf fullrun_mos2_xmm0124712501_pi300-10000_pass1_cl_src12.arf
[Thu Jun 21 22:44:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 22:44:25 2012] Updating source flux to 4e-14
[Thu Jun 21 22:45:24 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting