[Thu Jun 21 14:18:27 2012] Detection parameters:
  Position = (339.7, 305.1) = 13 0 22.21 28 24 0.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9863.3 +/- 120.2
  Background counts = 20.2
  Rate = 0.4 +/- 0.005

[Thu Jun 21 14:18:29 2012] Off-axis axis estimate = 3.03'
[Thu Jun 21 15:54:21 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 15:54:21 2012] Initial guess for spatial extent in simple fitting = 7.94"
[Thu Jun 21 15:54:21 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.924
[Thu Jun 21 15:54:21 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.94"
[Thu Jun 21 16:48:23 2012] fullrun_mos1_xmm0124712501_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 21 16:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124712501_pi300-10000_cl_pass0_src1.csv
[Thu Jun 21 16:48:23 2012] fullrun_mos1_xmm0124712501_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 21 16:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124712501_pi300-10000_cl_pass0_src1.csv
[Thu Jun 21 16:48:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124712501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124712501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 16:48:24 2012] fullrun_mos1_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 21 16:48:24 2012] fullrun_mos1_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 21 16:48:24 2012] Fit fullrun_mos1_xmm0124712501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun 21 17:52:32 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.237533 pixels away
[Thu Jun 21 17:52:32 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 17:52:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 17:52:32 2012] Assessing source extent using major
[Thu Jun 21 17:52:32 2012] Source does appear to be extended
[Thu Jun 21 17:52:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 19:13:00 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 19:13:00 2012] Initial guess for spatial extent in simple fitting = 7.94"
[Thu Jun 21 19:13:00 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.924
[Thu Jun 21 19:13:00 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.94"
[Thu Jun 21 19:58:04 2012] fullrun_mos1_xmm0124712501_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 21 19:58:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124712501_pi300-10000_cl_pass1_src1.csv
[Thu Jun 21 19:58:04 2012] fullrun_mos1_xmm0124712501_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 21 19:58:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124712501_pi300-10000_cl_pass1_src1.csv
[Thu Jun 21 19:58:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124712501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124712501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 19:58:04 2012] fullrun_mos1_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 21 19:58:04 2012] fullrun_mos1_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 21 19:58:04 2012] Fit fullrun_mos1_xmm0124712501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun 21 20:38:01 2012] Spatial fit model total counts = 8729.940000, observed total counts = 8731.000000
[Thu Jun 21 20:38:01 2012] Offset between fit and detection position for source 1 = 0.129381 pixels
[Thu Jun 21 20:38:01 2012] 8748.720000 total counts/ 1887.060000 bgd. counts: snr = 157.956077
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.129381 pixels
  Position = (339.6, 305.2) = 13 0 22.24 28 24 0.5
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 6861.7 +/- 93.5
  Background counts = 1887.1
  Rate = 0.2 +/- 0.003
[Thu Jun 21 20:38:02 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 20:38:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 20:38:02 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 20:38:02 2012] Source does appear to be extended
[Thu Jun 21 20:38:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 21:37:38 2012] Counts = 6861.660000, rescaling region sizes by 2.000000
[Thu Jun 21 21:37:38 2012] XMMSAS src. selection expression = ellipse(29494.980600, 26504.980000, 645.486019, 645.486019, 0.000000, X, Y)
[Thu Jun 21 21:37:38 2012] Writing source region out to fullrun_mos1_xmm0124712501_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 21 21:37:38 2012] Extracting stamp from image fullrun_mos1_xmm0124712501_pi300-10000_cl_sm2.00.img.gz, (302, 268) - (377, 342)
[Thu Jun 21 21:37:38 2012] XMMSAS bgd. selection expression = annulus(29494.980600, 26504.980000, 2151.620062, 4303.240124, X, Y) && !ellipse(31460.986480, 27234.874000, 328.509609, 328.509609, 0.000000, X, Y) && !ellipse(31761.138000, 29499.494000, 284.667212, 284.667212, 0.000000, X, Y) && !ellipse(32376.692600, 27509.350800, 459.606413, 459.606413, 0.000000, X, Y)
[Thu Jun 21 21:37:38 2012] Writing fullrun_mos1_xmm0124712501_pi300-10000_pass1_cl_src1.gif
[Thu Jun 21 21:37:41 2012] Mean detx,y = (-3291.03, 1729.44) 
[Thu Jun 21 21:37:42 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 21:38:21 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 21:38:21 2012] Setting source spectrum file to fullrun_mos1_xmm0124712501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 21 21:38:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0124712501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 21 22:44:24 2012] Updating aperture counts using extracted products
[Thu Jun 21 22:44:24 2012] Error reading totcts from fullrun_mos1_xmm0124712501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 21 22:44:24 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 22:44:24 2012] Using photon index=1.80, rate=0.246, arf fullrun_mos1_xmm0124712501_pi300-10000_pass1_cl_src1.arf
[Thu Jun 21 22:44:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 22:44:24 2012] Updating source flux to 2.7e-12
[Thu Jun 21 22:45:24 2012] Reading fit data from xmm0124712501/analysis//spectral/fullrun_mos1_xmm0124712501_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jun 21 22:45:24 2012] Spectral fit parameter nH value = 1.70666e+13
[Thu Jun 21 22:45:24 2012] Spectral fit parameter PhoIndex value = 2.03956
[Thu Jun 21 22:45:24 2012] Failed to get F(0.3-8.0) from xmm0124712501/analysis//spectral/fullrun_mos1_xmm0124712501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jun 21 22:45:24 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 22:45:24 2012] Using Nh = 1.7e+13, photon index=2.04, rate=0.246, arf fullrun_mos1_xmm0124712501_pi300-10000_pass1_cl_src1.arf
[Thu Jun 21 22:45:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 22:45:24 2012] Updating source flux to 2.5e-12