[Thu May  9 17:41:30 2013] Detection parameters:
  Position = (177.9, 388.1) = 12 58 8.63 28 16 55.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.1 +/- 14.0
  Background counts = 35.4
  Rate = 0.004 +/- 0.0006

[Thu May  9 17:41:35 2013] Off-axis axis estimate = 10.89'
[Thu May  9 17:43:10 2013] Using EEF radius (= 11.87 ")to estimate initial spatial extent for simple fitting
[Thu May  9 17:43:10 2013] Initial guess for spatial extent in simple fitting = 11.87"
[Thu May  9 17:43:10 2013] source mask rpix=2.7, npix_max = 41, mask sum = 33, frac = 0.791
[Thu May  9 17:43:10 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 11.87"
[Thu May  9 18:21:20 2013] fullrun_pn_xmm0124712101_pi300-10000_cl_pass0_src11.ximg exists
[Thu May  9 18:21:20 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0124712101_pi300-10000_cl_pass0_src11.csv
[Thu May  9 18:21:20 2013] fullrun_pn_xmm0124712101_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu May  9 18:21:20 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0124712101_pi300-10000_cl_pass0_src11.csv
[Thu May  9 18:21:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0124712101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0124712101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 18:21:20 2013] fullrun_pn_xmm0124712101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu May  9 18:21:20 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0124712101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Thu May  9 18:21:20 2013] fullrun_pn_xmm0124712101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu May  9 18:21:20 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0124712101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Thu May  9 18:21:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0124712101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0124712101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 19:09:21 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 15.427086 pixels away
[Thu May  9 19:09:21 2013] Vigneting correction estimate = 1.000000
[Thu May  9 19:09:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 19:09:21 2013] Assessing source extent using major
[Thu May  9 19:09:21 2013] Source does appear to be extended
[Thu May  9 19:09:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 19:09:35 2013] Using EEF radius (= 11.87 ")to estimate initial spatial extent for simple fitting
[Thu May  9 19:09:35 2013] Initial guess for spatial extent in simple fitting = 11.87"
[Thu May  9 19:09:35 2013] source mask rpix=2.7, npix_max = 41, mask sum = 33, frac = 0.791
[Thu May  9 19:09:35 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 11.87"
[Thu May  9 19:49:08 2013] fullrun_pn_xmm0124712101_pi300-10000_cl_pass1_src10.ximg exists
[Thu May  9 19:49:08 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0124712101_pi300-10000_cl_pass1_src10.csv
[Thu May  9 19:49:08 2013] fullrun_pn_xmm0124712101_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu May  9 19:49:08 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0124712101_pi300-10000_cl_pass1_src10.csv
[Thu May  9 19:49:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0124712101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0124712101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 19:49:08 2013] fullrun_pn_xmm0124712101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu May  9 19:49:08 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0124712101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu May  9 19:49:08 2013] fullrun_pn_xmm0124712101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu May  9 19:49:08 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0124712101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu May  9 19:49:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0124712101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0124712101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 20:39:14 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 14.860746 pixels away
[Thu May  9 20:39:14 2013] Vigneting correction estimate = 1.000000
[Thu May  9 20:39:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 20:39:14 2013] Assessing source extent using major
[Thu May  9 20:39:14 2013] Source does appear to be extended
[Thu May  9 20:39:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 20:39:29 2013] XMMSAS src. selection expression = ellipse(15431.208908, 33716.829773, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  9 20:39:29 2013] Writing source region out to fullrun_pn_xmm0124712101_pi300-10000_pass1_cl_src12_src.reg
[Thu May  9 20:39:29 2013] Extracting stamp from image fullrun_pn_xmm0124712101_pi300-10000_cl_sm2.00.img.gz, (140, 351) - (215, 426)
[Thu May  9 20:39:29 2013] XMMSAS bgd. selection expression = annulus(15431.208908, 33716.829773, 1087.500000, 2175.000000, X, Y) && !ellipse(16283.239670, 31055.962067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13862.922928, 32056.873596, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  9 20:39:29 2013] Writing fullrun_pn_xmm0124712101_pi300-10000_pass1_cl_src12.gif
[Thu May  9 20:43:08 2013] Mean detx,y = (1890.17, 14113.70) 
[Thu May  9 20:43:10 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  9 20:43:28 2013] Binned source spectrum to 10 counts/bin
[Thu May  9 20:43:28 2013] Setting source spectrum file to fullrun_pn_xmm0124712101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu May  9 20:43:28 2013] Setting bgd. spectrum file to fullrun_pn_xmm0124712101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu May  9 20:57:07 2013] Not generating rmf since there are only 91 counts
[Thu May  9 20:57:07 2013] rmf not generated due to insufficient counts
[Thu May  9 21:37:14 2013] Updating aperture counts using extracted products
[Thu May  9 21:37:14 2013] Total counts from fullrun_pn_xmm0124712101_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 256.00
[Thu May  9 21:37:14 2013] Total counts from fullrun_pn_xmm0124712101_pi300-10000_pass1_cl_src12_bgd.pi.gz = 868.00
[Thu May  9 21:37:14 2013] Got source and background scale factors 807171.000000, 2949465.000000
[Thu May  9 21:37:14 2013] User source parameters:
  Position = (177.9, 388.1) = 12 58 8.63 28 16 55.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 18.5 +/- 17.0
  Background aperture counts = 237.5
  Rate = 0.0008 +/- 0.0007

[Thu May  9 21:37:14 2013] Updating counts from extracted products
[Thu May  9 21:37:14 2013] Set source signif. to 18.46/15.41 = 1.20
[Thu May  9 21:37:18 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 21:37:18 2013] Using photon index=1.80, rate=0.000793, arf fullrun_pn_xmm0124712101_pi300-10000_pass1_cl_src12.arf
[Thu May  9 21:37:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  9 21:37:18 2013] Updating source flux to 5.4e-15
[Thu May  9 21:37:28 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May  9 21:37:30 2013] xmm0124712101/analysis//spectral/fullrun_pn_xmm0124712101_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete