[Thu May  9 17:42:05 2013] Detection parameters:
  Position = (349.8, 445.8) = 12 57 12.03 28 21 6.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.6 +/- 7.2
  Background counts = 6.8
  Rate = 0.001 +/- 0.0003

[Thu May  9 17:42:05 2013] Off-axis axis estimate = 11.31'
[Thu May  9 18:47:09 2013] Using EEF radius (= 12.08 ")to estimate initial spatial extent for simple fitting
[Thu May  9 18:47:09 2013] Initial guess for spatial extent in simple fitting = 12.08"
[Thu May  9 18:47:09 2013] source mask rpix=2.8, npix_max = 42, mask sum = 41, frac = 0.954
[Thu May  9 18:47:09 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 12.08"
[Thu May  9 19:09:15 2013] fullrun_mos2_xmm0124712101_pi300-10000_cl_pass0_src26.ximg exists
[Thu May  9 19:09:15 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0124712101_pi300-10000_cl_pass0_src26.csv
[Thu May  9 19:09:15 2013] fullrun_mos2_xmm0124712101_pi300-10000_cl_pass0_src26_1.ximg exists
[Thu May  9 19:09:15 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0124712101_pi300-10000_cl_pass0_src26.csv
[Thu May  9 19:09:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0124712101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0124712101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 19:09:15 2013] fullrun_mos2_xmm0124712101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Thu May  9 19:09:15 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0124712101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Thu May  9 19:09:15 2013] fullrun_mos2_xmm0124712101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Thu May  9 19:09:15 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0124712101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Thu May  9 19:09:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0124712101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0124712101_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 19:09:26 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 15.019539 pixels away
[Thu May  9 19:09:26 2013] Vigneting correction estimate = 1.000000
[Thu May  9 19:09:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 19:09:26 2013] Assessing source extent using major
[Thu May  9 19:09:26 2013] Source does appear to be extended
[Thu May  9 19:09:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 20:14:40 2013] Using EEF radius (= 12.08 ")to estimate initial spatial extent for simple fitting
[Thu May  9 20:14:40 2013] Initial guess for spatial extent in simple fitting = 12.08"
[Thu May  9 20:14:40 2013] source mask rpix=2.8, npix_max = 42, mask sum = 41, frac = 0.954
[Thu May  9 20:14:40 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 12.08"
[Thu May  9 20:39:07 2013] fullrun_mos2_xmm0124712101_pi300-10000_cl_pass1_src25.ximg exists
[Thu May  9 20:39:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0124712101_pi300-10000_cl_pass1_src25.csv
[Thu May  9 20:39:07 2013] fullrun_mos2_xmm0124712101_pi300-10000_cl_pass1_src25_1.ximg exists
[Thu May  9 20:39:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0124712101_pi300-10000_cl_pass1_src25.csv
[Thu May  9 20:39:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0124712101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0124712101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 20:39:08 2013] fullrun_mos2_xmm0124712101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Thu May  9 20:39:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0124712101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Thu May  9 20:39:08 2013] fullrun_mos2_xmm0124712101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Thu May  9 20:39:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0124712101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Thu May  9 20:39:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0124712101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0124712101_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 20:39:20 2013] Spatial fit model total counts = 104.117000, observed total counts = 92.000000
[Thu May  9 20:39:20 2013] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  9 20:39:20 2013] Vigneting correction estimate = 1.000000
[Thu May  9 20:39:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 20:39:20 2013] Assessing source extent using major
[Thu May  9 20:39:20 2013] Source does appear to be extended
[Thu May  9 20:39:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 21:24:56 2013] XMMSAS src. selection expression = ellipse(30381.534180, 38734.524506, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  9 21:24:56 2013] Writing source region out to fullrun_mos2_xmm0124712101_pi300-10000_pass1_cl_src26_src.reg
[Thu May  9 21:24:56 2013] Extracting stamp from image fullrun_mos2_xmm0124712101_pi300-10000_cl_sm2.00.img.gz, (312, 408) - (387, 483)
[Thu May  9 21:24:56 2013] XMMSAS bgd. selection expression = annulus(30381.534180, 38734.524506, 1087.500000, 2175.000000, X, Y)
[Thu May  9 21:24:56 2013] Writing fullrun_mos2_xmm0124712101_pi300-10000_pass1_cl_src26.gif
[Thu May  9 21:28:43 2013] Mean detx,y = (12702.51, -8613.37) 
[Thu May  9 21:28:44 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  9 21:28:56 2013] Binned source spectrum to 10 counts/bin
[Thu May  9 21:28:56 2013] Setting source spectrum file to fullrun_mos2_xmm0124712101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Thu May  9 21:28:56 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0124712101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Thu May  9 21:36:46 2013] Not generating rmf since there are only 31 counts
[Thu May  9 21:36:46 2013] rmf not generated due to insufficient counts
[Thu May  9 21:37:23 2013] Updating aperture counts using extracted products
[Thu May  9 21:37:23 2013] Total counts from fullrun_mos2_xmm0124712101_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 63.00
[Thu May  9 21:37:23 2013] Total counts from fullrun_mos2_xmm0124712101_pi300-10000_pass1_cl_src26_bgd.pi.gz = 264.00
[Thu May  9 21:37:23 2013] Got source and background scale factors 913464.000000, 5967068.000000
[Thu May  9 21:37:23 2013] User source parameters:
  Position = (349.8, 445.8) = 12 57 12.03 28 21 6.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 22.6 +/- 9.0
  Background aperture counts = 40.4
  Rate = 0.0008 +/- 0.0003

[Thu May  9 21:37:23 2013] Updating counts from extracted products
[Thu May  9 21:37:23 2013] Set source signif. to 22.59/6.36 = 3.55
[Thu May  9 21:37:23 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 21:37:23 2013] Using photon index=1.80, rate=0.000829, arf fullrun_mos2_xmm0124712101_pi300-10000_pass1_cl_src26.arf
[Thu May  9 21:37:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  9 21:37:23 2013] Updating source flux to 3.8e-14
[Thu May  9 21:37:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May  9 21:37:28 2013] xmm0124712101/analysis//spectral/fullrun_mos2_xmm0124712101_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete