[Wed Aug  1 22:11:32 2012] Detection parameters:
  Position = (186.0, 475.7) = 13 0 3.35 27 57 57.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.5 +/- 21.7
  Background counts = 120.7
  Rate = 0.005 +/- 0.0008

[Wed Aug  1 22:11:33 2012] Off-axis axis estimate = 15.22'
[Thu Aug  2 00:16:39 2012] Using EEF radius (= 14.04 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 00:16:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug  2 00:16:39 2012] Initial guess for spatial extent in simple fitting = 14.04"
[Thu Aug  2 00:16:39 2012] source mask rpix=3.2, npix_max = 55, mask sum = 52, frac = 0.936
[Thu Aug  2 00:16:39 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 14.04"
[Thu Aug  2 00:46:14 2012] fullrun_mos1_xmm0124710501_pi300-10000_cl_pass0_src12.ximg exists
[Thu Aug  2 00:46:14 2012] fullrun_mos1_xmm0124710501_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu Aug  2 00:46:14 2012] Fit fullrun_mos1_xmm0124710501_pi300-10000_cl_pass0_src12 appears to have run properly
[Thu Aug  2 00:46:15 2012] fullrun_mos1_xmm0124710501_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu Aug  2 00:46:15 2012] fullrun_mos1_xmm0124710501_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Aug  2 00:46:15 2012] Fit fullrun_mos1_xmm0124710501_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Thu Aug  2 01:04:13 2012] Spatial fit model total counts = 1740.110000, observed total counts = 1716.000000
[Thu Aug  2 01:04:13 2012] Offset between fit and detection position for source 12 = 9.273786 pixels
[Thu Aug  2 01:04:13 2012] 1860.570000 total counts/ 672.380000 bgd. counts: snr = 45.822470
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 9.273786 pixels
  Position = (178.7, 469.9) = 13 0 5.72 27 57 33.4
  Extent = 28.1 (28.1-56.2)", rotation angle = 0
  Source counts = 1188.2 +/- 43.1
  Background counts = 672.4
  Rate = 0.05 +/- 0.002
[Thu Aug  2 01:04:13 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 01:04:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 01:04:13 2012] Assessing source extent using major axis lower bound
[Thu Aug  2 01:04:13 2012] Source does appear to be extended
[Thu Aug  2 01:04:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 01:40:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  2 01:40:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug  2 01:40:53 2012] Initial guess for spatial extent in simple fitting = 28.08"
[Thu Aug  2 01:40:53 2012] source mask rpix=6.5, npix_max = 193, mask sum = 183, frac = 0.946
[Thu Aug  2 01:40:53 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 28.08"
[Thu Aug  2 02:04:50 2012] fullrun_mos1_xmm0124710501_pi300-10000_cl_pass1_src10.ximg exists
[Thu Aug  2 02:04:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710501_pi300-10000_cl_pass1_src10.csv
[Thu Aug  2 02:04:50 2012] fullrun_mos1_xmm0124710501_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu Aug  2 02:04:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710501_pi300-10000_cl_pass1_src10.csv
[Thu Aug  2 02:04:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710501_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710501_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 02:04:50 2012] fullrun_mos1_xmm0124710501_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu Aug  2 02:04:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710501_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu Aug  2 02:04:50 2012] fullrun_mos1_xmm0124710501_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Aug  2 02:04:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710501_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu Aug  2 02:04:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710501_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710501_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 02:17:21 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 19.910018 pixels away
[Thu Aug  2 02:17:21 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 02:17:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 02:17:21 2012] Assessing source extent using major axis lower bound
[Thu Aug  2 02:17:21 2012] Source does appear to be extended
[Thu Aug  2 02:17:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 03:25:42 2012] Counts = 1188.190000, rescaling region sizes by 2.000000
[Thu Aug  2 03:25:42 2012] XMMSAS src. selection expression = ellipse(15502.464000, 40829.354000, 3369.192097, 3369.192097, 0.000000, X, Y)
[Thu Aug  2 03:25:42 2012] Writing source region out to fullrun_mos1_xmm0124710501_pi300-10000_pass1_cl_src12_src.reg
[Thu Aug  2 03:25:42 2012] Extracting stamp from image fullrun_mos1_xmm0124710501_pi300-10000_cl_sm2.00.img.gz, (0, 276) - (372, 595)
[Thu Aug  2 03:25:42 2012] XMMSAS bgd. selection expression = annulus(15502.464000, 40829.354000, 11230.640323, 22461.280646, X, Y) && !ellipse(18187.911224, 32987.546326, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(25523.807617, 37190.340881, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(24709.090637, 39316.209564, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(33145.762177, 35520.234528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23170.835693, 39032.519684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33252.884644, 20229.912842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24163.598938, 38627.760468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16656.113312, 33401.537079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38010.662628, 29565.882629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20944.980000, 19152.417800, 558.959216, 558.959216, 0.000000, X, Y) && !ellipse(17673.560364, 33772.410156, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(22666.398712, 40521.709686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33850.659180, 20508.903320, 1740.000000, 1740.000000, 0.000000, X, Y)
[Thu Aug  2 03:25:42 2012] Writing fullrun_mos1_xmm0124710501_pi300-10000_pass1_cl_src12.gif
[Thu Aug  2 03:36:15 2012] Mean detx,y = (15310.68, 566.43) 
[Thu Aug  2 03:36:17 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 03:41:52 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 03:41:52 2012] Setting source spectrum file to fullrun_mos1_xmm0124710501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Aug  2 03:41:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0124710501_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Aug  2 04:03:38 2012] Updating aperture counts using extracted products
[Thu Aug  2 04:03:38 2012] Error reading totcts from fullrun_mos1_xmm0124710501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Aug  2 04:03:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 04:03:38 2012] Using photon index=1.80, rate=0.0457, arf fullrun_mos1_xmm0124710501_pi300-10000_pass1_cl_src12.arf
[Thu Aug  2 04:03:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 04:03:38 2012] Updating source flux to 1.1e-12
[Thu Aug  2 04:03:55 2012] Reading fit data from xmm0124710501/analysis//spectral/fullrun_mos1_xmm0124710501_pi300-10000_pass1_cl_src12_pl.csv
[Thu Aug  2 04:03:55 2012] Spectral fit parameter nH value = 3.59149e+20
[Thu Aug  2 04:03:55 2012] Spectral fit parameter PhoIndex value = 1.79133
[Thu Aug  2 04:03:55 2012] Failed to get F(0.3-8.0) from xmm0124710501/analysis//spectral/fullrun_mos1_xmm0124710501_pi300-10000_pass1_cl_src12_pl.csv, possibly due to different flux energy range selected
[Thu Aug  2 04:03:55 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 04:03:55 2012] Using Nh = 3.6e+20, photon index=1.79, rate=0.0457, arf fullrun_mos1_xmm0124710501_pi300-10000_pass1_cl_src12.arf
[Thu Aug  2 04:03:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 04:03:55 2012] Updating source flux to 1.2e-12