[Wed Aug  1 22:11:32 2012] Detection parameters:
  Position = (293.9, 428.0) = 12 59 27.90 27 54 35.8
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 207.8 +/- 20.7
  Background counts = 908.5
  Rate = 0.02 +/- 0.002

[Wed Aug  1 22:11:33 2012] Off-axis axis estimate = 9.40'
[Thu Aug  2 00:16:39 2012] Using EEF radius (= 11.13 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 00:16:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug  2 00:16:39 2012] Initial guess for spatial extent in simple fitting = 11.13"
[Thu Aug  2 00:16:39 2012] source mask rpix=2.6, npix_max = 37, mask sum = 28, frac = 0.748
[Thu Aug  2 00:16:39 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.13"
[Thu Aug  2 00:46:14 2012] fullrun_mos1_xmm0124710501_pi300-10000_cl_pass0_src2.ximg exists
[Thu Aug  2 00:46:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710501_pi300-10000_cl_pass0_src2.csv
[Thu Aug  2 00:46:14 2012] fullrun_mos1_xmm0124710501_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Aug  2 00:46:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710501_pi300-10000_cl_pass0_src2.csv
[Thu Aug  2 00:46:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 00:46:14 2012] fullrun_mos1_xmm0124710501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Aug  2 00:46:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710501_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Aug  2 00:46:14 2012] fullrun_mos1_xmm0124710501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Aug  2 00:46:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710501_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Aug  2 00:46:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710501_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 01:04:13 2012] Warning, spatial fit 2 centroid is now closest to src. 14
[Thu Aug  2 01:04:13 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 01:04:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 01:04:13 2012] Assessing source extent using major
[Thu Aug  2 01:04:13 2012] Source does appear to be extended
[Thu Aug  2 01:04:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 01:40:53 2012] Using EEF radius (= 11.13 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 01:40:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug  2 01:40:53 2012] Initial guess for spatial extent in simple fitting = 11.13"
[Thu Aug  2 01:40:53 2012] source mask rpix=2.6, npix_max = 37, mask sum = 28, frac = 0.748
[Thu Aug  2 01:40:53 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.13"
[Thu Aug  2 02:04:50 2012] fullrun_mos1_xmm0124710501_pi300-10000_cl_pass1_src2.ximg exists
[Thu Aug  2 02:04:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710501_pi300-10000_cl_pass1_src2.csv
[Thu Aug  2 02:04:50 2012] fullrun_mos1_xmm0124710501_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Aug  2 02:04:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710501_pi300-10000_cl_pass1_src2.csv
[Thu Aug  2 02:04:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710501_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710501_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 02:04:50 2012] fullrun_mos1_xmm0124710501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Aug  2 02:04:50 2012] fullrun_mos1_xmm0124710501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Aug  2 02:04:50 2012] Fit fullrun_mos1_xmm0124710501_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Aug  2 02:17:21 2012] Warning, spatial fit 2 centroid is now closest to src. 14
[Thu Aug  2 02:17:21 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 02:17:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 02:17:21 2012] Assessing source extent using major
[Thu Aug  2 02:17:21 2012] Source does appear to be extended
[Thu Aug  2 02:17:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 03:25:41 2012] XMMSAS src. selection expression = ellipse(25523.807617, 37190.340881, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Aug  2 03:25:41 2012] Writing source region out to fullrun_mos1_xmm0124710501_pi300-10000_pass1_cl_src10_src.reg
[Thu Aug  2 03:25:41 2012] Extracting stamp from image fullrun_mos1_xmm0124710501_pi300-10000_cl_sm2.00.img.gz, (219, 353) - (369, 503)
[Thu Aug  2 03:25:41 2012] XMMSAS bgd. selection expression = annulus(25523.807617, 37190.340881, 2175.000000, 4350.000000, X, Y) && !ellipse(24709.090637, 39316.209564, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(23170.835693, 39032.519684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24163.598938, 38627.760468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22666.398712, 40521.709686, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug  2 03:25:41 2012] Writing fullrun_mos1_xmm0124710501_pi300-10000_pass1_cl_src10.gif
[Thu Aug  2 03:32:43 2012] Mean detx,y = (7462.71, 5546.62) 
[Thu Aug  2 03:32:44 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 03:33:29 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 03:33:29 2012] Setting source spectrum file to fullrun_mos1_xmm0124710501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Aug  2 03:33:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0124710501_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Aug  2 03:45:25 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug  2 03:45:25 2012] rmf not generated due to insufficient counts
[Thu Aug  2 04:03:37 2012] Updating aperture counts using extracted products
[Thu Aug  2 04:03:37 2012] Error reading totcts from fullrun_mos1_xmm0124710501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Aug  2 04:03:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 04:03:38 2012] Using photon index=1.80, rate=0.0157, arf fullrun_mos1_xmm0124710501_pi300-10000_pass1_cl_src10.arf
[Thu Aug  2 04:03:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 04:03:38 2012] Updating source flux to 2.3e-13
[Thu Aug  2 04:03:39 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Aug  2 04:03:55 2012] xmm0124710501/analysis//spectral/fullrun_mos1_xmm0124710501_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete