[Tue May 14 04:06:34 2013] Detection parameters:
  Position = (372.4, 183.1) = 12 59 39.41 27 21 19.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.0 +/- 18.7
  Background counts = 76.7
  Rate = 0.01 +/- 0.002

[Tue May 14 04:06:43 2013] Off-axis axis estimate = 9.93'
[Tue May 14 04:07:40 2013] Using EEF radius (= 11.40 ")to estimate initial spatial extent for simple fitting
[Tue May 14 04:07:40 2013] Initial guess for spatial extent in simple fitting = 11.40"
[Tue May 14 04:07:40 2013] source mask rpix=2.6, npix_max = 38, mask sum = 41, frac = 1.053
[Tue May 14 04:07:40 2013] Giving source the simple spatial ID 88 for pass 0, mean size = 11.40"
[Tue May 14 04:07:43 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src88.ximg exists
[Tue May 14 04:07:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src88.csv
[Tue May 14 04:07:43 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src88_1.ximg exists
[Tue May 14 04:07:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src88.csv
[Tue May 14 04:07:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src88_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:07:46 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src88.ximg exists
[Tue May 14 04:07:46 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src88_1.ximg exists
[Tue May 14 04:07:46 2013] Fit fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src88 appears to have run properly
[Tue May 14 04:08:30 2013] Source 85 is offset by -1.637510 and -1.025510 pixels which is larger than
2 X fitted extent = 1.624212 x 1.624212, not incorporating fit results
[Tue May 14 04:08:31 2013] Source 85 is offset by 1.179570 and 3.887685 pixels which is larger than
2 X fitted extent = 1.341421 x 1.341421, not incorporating fit results
[Tue May 14 04:08:31 2013] Spatial fit model total counts = 1299.160000, observed total counts = 1277.000000
[Tue May 14 04:08:31 2013] Offset between fit and detection position for source 85 = 5.539532 pixels
[Tue May 14 04:08:31 2013] 1270.915000 total counts/ 1086.260000 bgd. counts: snr = 5.602659
Spatial fit parameters:
  Offset between fit and detection position for source 85 = 5.539532 pixels
  Position = (373.7, 188.5) = 12 59 38.97 27 21 44.2
  Extent = 22.7 (22.6-22.8)", rotation angle = 0
  Source counts = 184.7 +/- 35.6
  Background counts = 1086.3
  Rate = 0.02 +/- 0.004
[Tue May 14 04:08:31 2013] Vigneting correction estimate = 1.000000
[Tue May 14 04:08:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 04:08:31 2013] Assessing source extent using major axis lower bound
[Tue May 14 04:08:31 2013] Source does appear to be extended
[Tue May 14 04:08:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 04:08:31 2013] Source is confused with source 82
[Tue May 14 04:08:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 14 04:08:58 2013] Initial guess for spatial extent in simple fitting = 22.70"
[Tue May 14 04:08:58 2013] source mask rpix=5.2, npix_max = 130, mask sum = 119, frac = 0.910
[Tue May 14 04:08:58 2013] Giving source the simple spatial ID 75 for pass 1, mean size = 22.70"
[Tue May 14 04:09:01 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src75.ximg exists
[Tue May 14 04:09:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src75.csv
[Tue May 14 04:09:01 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src75_1.ximg exists
[Tue May 14 04:09:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src75.csv
[Tue May 14 04:09:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:09:04 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src75.ximg exists
[Tue May 14 04:09:04 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src75_1.ximg exists
[Tue May 14 04:09:04 2013] Fit fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src75 appears to have run properly
[Tue May 14 04:09:52 2013] Warning, spatial fit 75 centroid is now closest to src. 105
[Tue May 14 04:09:52 2013] Vigneting correction estimate = 1.000000
[Tue May 14 04:09:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 04:09:52 2013] Assessing source extent using major axis lower bound
[Tue May 14 04:09:52 2013] Source does appear to be extended
[Tue May 14 04:09:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 04:10:34 2013] XMMSAS src. selection expression = ellipse(32467.403200, 16350.592000, 1362.060039, 1362.060039, 0.000000, X, Y)
[Tue May 14 04:10:34 2013] Not overwriting source region fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src85_src.reg
[Tue May 14 04:10:34 2013] Extracting stamp from image fullrun_mos1_xmm0124710401_pi300-10000_cl_sm2.00.img.gz, (295, 110) - (452, 267)
[Tue May 14 04:10:34 2013] XMMSAS bgd. selection expression = annulus(32467.403200, 16350.592000, 2270.100065, 4540.200131, X, Y) && !ellipse(27607.936584, 14230.263489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29572.530823, 14726.051712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30019.945740, 13698.285889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29154.454000, 21572.326000, 1389.976040, 1389.976040, 0.000000, X, Y) && !ellipse(28506.348000, 13907.911000, 1674.752048, 1674.752048, 0.000000, X, Y) && !ellipse(31213.487610, 14052.622116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32049.519165, 13874.068741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28283.204200, 16514.392000, 650.214419, 650.214419, 0.000000, X, Y) && !ellipse(32517.322052, 14310.181198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35164.218994, 15347.911346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28919.356000, 14765.878800, 1813.368052, 1813.368052, 0.000000, X, Y) && !ellipse(28758.839800, 21257.803600, 1392.096040, 619.752018, 315.645000, X, Y) && !ellipse(30548.015137, 14630.153381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31088.607200, 14745.756000, 1894.720055, 1894.720055, 0.000000, X, Y) && !ellipse(31844.391602, 13350.057556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27988.043854, 14793.538574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27547.930267, 13524.516876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29812.107391, 18950.727692, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(31871.682648, 12910.838715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31323.785400, 12294.824000, 1998.952058, 986.224028, 158.276900, X, Y) && !ellipse(31220.644000, 16164.632000, 1119.800032, 1119.800032, 0.000000, X, Y) && !ellipse(32362.784000, 13195.792000, 1982.152057, 1982.152057, 0.000000, X, Y) && !ellipse(33653.332000, 13438.430000, 2007.640058, 2007.640058, 0.000000, X, Y) && !ellipse(33841.719696, 14472.584030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37310.170319, 20209.017761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30784.105652, 12913.184433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32187.854156, 14741.715057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32927.656830, 15416.340744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27742.230621, 15183.861069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27261.829620, 16401.156158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28120.084000, 13828.240000, 1861.776054, 1861.776054, 0.000000, X, Y) && !ellipse(37540.326843, 18034.220871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36861.910000, 17252.951800, 1944.136056, 1944.136056, 0.000000, X, Y) && !ellipse(27222.634000, 13944.272000, 1792.136052, 1792.136052, 0.000000, X, Y) && !ellipse(37767.902679, 19332.542145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34802.420807, 15010.025681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37594.741669, 21820.668335, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(35800.095856, 15700.860321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34695.930237, 14064.021484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37208.957947, 19541.113281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31286.827484, 13354.332153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35640.547180, 14813.193756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29701.056000, 13916.928000, 1900.736055, 1900.736055, 0.000000, X, Y)
[Tue May 14 04:10:34 2013] Writing fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src85.gif
[Tue May 14 04:29:52 2013] Mean detx,y = (-12903.11, -2665.41) 
[Tue May 14 04:29:54 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 14 04:30:17 2013] Binned source spectrum to 10 counts/bin
[Tue May 14 04:30:17 2013] Setting source spectrum file to fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Tue May 14 04:30:17 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src85_bgd.pi.gz