[Tue May 14 04:06:33 2013] Detection parameters:
  Position = (350.5, 153.1) = 12 59 46.56 27 19 9.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.4 +/- 18.3
  Background counts = 56.5
  Rate = 0.01 +/- 0.002

[Tue May 14 04:06:43 2013] Off-axis axis estimate = 11.19'
[Tue May 14 04:07:39 2013] Using EEF radius (= 12.03 ")to estimate initial spatial extent for simple fitting
[Tue May 14 04:07:39 2013] Initial guess for spatial extent in simple fitting = 12.03"
[Tue May 14 04:07:39 2013] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.985
[Tue May 14 04:07:39 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 12.03"
[Tue May 14 04:07:41 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src27.ximg exists
[Tue May 14 04:07:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src27.csv
[Tue May 14 04:07:41 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src27_1.ximg exists
[Tue May 14 04:07:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src27.csv
[Tue May 14 04:07:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:07:44 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Tue May 14 04:07:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src27.csv
[Tue May 14 04:07:44 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Tue May 14 04:07:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src27.csv
[Tue May 14 04:07:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:08:30 2013] Warning, spatial fit 27 centroid is now closest to src. 129
[Tue May 14 04:08:31 2013] Spatial fit model total counts = 1357.110000, observed total counts = 1354.000000
[Tue May 14 04:08:31 2013] Offset between fit and detection position for source 71 = 1.763516 pixels
[Tue May 14 04:08:31 2013] Warning, changing simple spatial fit ID from 27 to 34
[Tue May 14 04:08:31 2013] 1335.492700 total counts/ 1303.830000 bgd. counts: snr = 0.876875
Spatial fit parameters:
  Offset between fit and detection position for source 71 = 1.763516 pixels
  Position = (351.6, 151.7) = 12 59 46.22 27 19 4.1
  Extent = 13.3 (3.0-23.7)", rotation angle = 0
  Source counts = 31.7 +/- 36.5
  Background counts = 1303.8
  Rate = 0.004 +/- 0.004
  Deleting source due to low Poisson probability