[Tue May 14 04:06:33 2013] Detection parameters:
  Position = (236.6, 189.1) = 13 0 23.74 27 21 49.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.5 +/- 17.8
  Background counts = 74.6
  Rate = 0.01 +/- 0.002

[Tue May 14 04:06:43 2013] Off-axis axis estimate = 9.10'
[Tue May 14 04:07:39 2013] Using EEF radius (= 10.98 ")to estimate initial spatial extent for simple fitting
[Tue May 14 04:07:39 2013] Initial guess for spatial extent in simple fitting = 10.98"
[Tue May 14 04:07:39 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.984
[Tue May 14 04:07:39 2013] Giving source the simple spatial ID 54 for pass 0, mean size = 10.98"
[Tue May 14 04:07:42 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src54.ximg exists
[Tue May 14 04:07:42 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src54_1.ximg exists
[Tue May 14 04:07:42 2013] Fit fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src54 appears to have run properly
[Tue May 14 04:07:45 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Tue May 14 04:07:45 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Tue May 14 04:07:45 2013] Fit fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly
[Tue May 14 04:08:30 2013] Source 65 is offset by -2.388863 and 0.758285 pixels which is larger than
2 X fitted extent = 1.300653 x 1.300653, not incorporating fit results
[Tue May 14 04:08:31 2013] Warning, spatial fit 54 centroid is now closest to src. 91
[Tue May 14 04:08:31 2013] Vigneting correction estimate = 1.000000
[Tue May 14 04:08:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 04:08:31 2013] Assessing source extent using major
[Tue May 14 04:08:31 2013] Source does appear to be extended
[Tue May 14 04:08:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 04:08:31 2013] Source is confused with source 70
[Tue May 14 04:08:58 2013] Using EEF radius (= 10.98 ")to estimate initial spatial extent for simple fitting
[Tue May 14 04:08:58 2013] Initial guess for spatial extent in simple fitting = 10.98"
[Tue May 14 04:08:58 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.984
[Tue May 14 04:08:58 2013] Giving source the simple spatial ID 44 for pass 1, mean size = 10.98"
[Tue May 14 04:09:00 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src44.ximg exists
[Tue May 14 04:09:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src44.csv
[Tue May 14 04:09:00 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src44_1.ximg exists
[Tue May 14 04:09:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src44.csv
[Tue May 14 04:09:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:09:03 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Tue May 14 04:09:03 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Tue May 14 04:09:03 2013] Fit fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Tue May 14 04:09:52 2013] Warning, spatial fit 44 centroid is now closest to src. 70
[Tue May 14 04:09:52 2013] Warning: source 69 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 65 at 24.586123 pixels away
[Tue May 14 04:09:52 2013] Spatial fit model total counts = 1231.160000, observed total counts = 1221.000000
[Tue May 14 04:09:52 2013] Offset between fit and detection position for source 65 = 3.171251 pixels
[Tue May 14 04:09:52 2013] Warning, changing simple spatial fit ID from 44 to 96
[Tue May 14 04:09:52 2013] 1215.357200 total counts/ 1125.290000 bgd. counts: snr = 2.684939
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 3.171251 pixels
  Position = (237.2, 192.3) = 13 0 23.57 27 22 0.6
  Extent = 21.7 (21.6-21.8)", rotation angle = 0
  Source counts = 90.1 +/- 34.9
  Background counts = 1125.3
  Rate = 0.01 +/- 0.004
[Tue May 14 04:09:52 2013] Vigneting correction estimate = 1.000000
[Tue May 14 04:09:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 04:09:52 2013] Assessing source extent using major axis lower bound
[Tue May 14 04:09:52 2013] Source does appear to be extended
[Tue May 14 04:09:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 04:10:31 2013] XMMSAS src. selection expression = ellipse(20584.178000, 16677.430000, 1303.758038, 1303.758038, 0.000000, X, Y)
[Tue May 14 04:10:31 2013] Not overwriting source region fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src65_src.reg
[Tue May 14 04:10:31 2013] Extracting stamp from image fullrun_mos1_xmm0124710401_pi300-10000_cl_sm2.00.img.gz, (162, 117) - (312, 267)
[Tue May 14 04:10:31 2013] XMMSAS bgd. selection expression = annulus(20584.178000, 16677.430000, 2172.930063, 4345.860125, X, Y) && !ellipse(17567.133912, 16195.269420, 603.964017, 603.964017, 0.000000, X, Y) && !ellipse(20840.124863, 15341.379974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21855.580643, 15084.302780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17685.903595, 15351.616440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18987.310013, 14485.324188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19339.980000, 17535.412000, 1768.512051, 1768.512051, 0.000000, X, Y) && !ellipse(18731.884247, 16653.994598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18673.246597, 15262.428696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20738.414673, 14309.646210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18060.264053, 16754.539230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20124.330292, 15162.550476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18422.464478, 14388.897507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21708.497330, 15612.572632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23232.018000, 16565.679800, 1683.040048, 1683.040048, 0.000000, X, Y) && !ellipse(19095.825043, 14134.767395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25989.164000, 16989.652000, 1631.696047, 1631.696047, 0.000000, X, Y) && !ellipse(20513.570862, 15703.224625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25793.354156, 13168.012817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21553.971970, 14307.792999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24928.430573, 15696.553864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22579.042938, 14055.518753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24327.658400, 15992.716000, 1718.728049, 1718.728049, 0.000000, X, Y) && !ellipse(25385.600000, 15453.146000, 1713.008049, 1713.008049, 0.000000, X, Y) && !ellipse(25027.346344, 16127.397415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22638.212921, 14905.218399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18124.218399, 16135.963867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21458.673676, 16133.241135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24102.838593, 13957.224258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23695.586304, 15877.306931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18734.952133, 16038.407471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17532.217224, 17079.713943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17294.888138, 16638.677734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23110.407227, 13779.045242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16883.346649, 16226.278671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17056.216934, 15703.563141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20169.264000, 16757.724000, 1756.896051, 1756.896051, 0.000000, X, Y) && !ellipse(25691.346000, 14054.634000, 1786.632051, 1786.632051, 0.000000, X, Y) && !ellipse(19528.497910, 16037.800797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22872.044006, 15525.648300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16007.502930, 15584.332413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25201.951691, 14477.830368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18263.774704, 13965.014114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19904.083664, 13870.732697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26031.974000, 12795.898000, 1878.440054, 1878.440054, 0.000000, X, Y) && !ellipse(24172.187958, 14313.559723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22667.880219, 13687.762680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21062.628265, 13438.789963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24707.194946, 13445.269562, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 14 04:10:31 2013] Writing fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src65.gif
[Tue May 14 04:16:10 2013] Mean detx,y = (-4902.69, -11427.04) 
[Tue May 14 04:16:12 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 14 04:16:35 2013] Binned source spectrum to 10 counts/bin
[Tue May 14 04:16:35 2013] Setting source spectrum file to fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Tue May 14 04:16:35 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src65_bgd.pi.gz