[Tue May 14 04:06:27 2013] Detection parameters:
  Position = (346.0, 409.1) = 12 59 48.00 27 37 49.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.5 +/- 18.0
  Background counts = 117.7
  Rate = 0.01 +/- 0.003

[Tue May 14 04:06:43 2013] Off-axis axis estimate = 8.73'
[Tue May 14 04:07:39 2013] Using EEF radius (= 10.80 ")to estimate initial spatial extent for simple fitting
[Tue May 14 04:07:39 2013] Initial guess for spatial extent in simple fitting = 10.80"
[Tue May 14 04:07:39 2013] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.844
[Tue May 14 04:07:39 2013] Giving source the simple spatial ID 45 for pass 0, mean size = 10.80"
[Tue May 14 04:07:42 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src45.ximg exists
[Tue May 14 04:07:42 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src45_1.ximg exists
[Tue May 14 04:07:42 2013] Fit fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src45 appears to have run properly
[Tue May 14 04:07:45 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Tue May 14 04:07:45 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Tue May 14 04:07:45 2013] Fit fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Tue May 14 04:08:30 2013] Spatial fit model total counts = 2842.740000, observed total counts = 2714.000000
[Tue May 14 04:08:30 2013] Offset between fit and detection position for source 4 = 3.346180 pixels
[Tue May 14 04:08:30 2013] Warning, changing simple spatial fit ID from 45 to 1
[Tue May 14 04:08:30 2013] 2867.008000 total counts/ 2686.920000 bgd. counts: snr = 3.474221
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 3.346180 pixels
  Position = (344.3, 406.2) = 12 59 48.54 27 37 31.4
  Extent = 18.2 (14.4-19.1)", rotation angle = 0
  Source counts = 180.1 +/- 53.5
  Background counts = 2686.9
  Rate = 0.02 +/- 0.007
[Tue May 14 04:08:31 2013] Vigneting correction estimate = 1.000000
[Tue May 14 04:08:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 04:08:31 2013] Assessing source extent using major axis lower bound
[Tue May 14 04:08:31 2013] Source does appear to be extended
[Tue May 14 04:08:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 04:08:31 2013] Source is confused with source 3
[Tue May 14 04:08:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 14 04:08:58 2013] Initial guess for spatial extent in simple fitting = 18.19"
[Tue May 14 04:08:58 2013] source mask rpix=4.2, npix_max = 87, mask sum = 51, frac = 0.581
[Tue May 14 04:08:58 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 18.19"
[Tue May 14 04:09:00 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src35.ximg exists
[Tue May 14 04:09:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src35.csv
[Tue May 14 04:09:00 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src35_1.ximg exists
[Tue May 14 04:09:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src35.csv
[Tue May 14 04:09:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:09:03 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Tue May 14 04:09:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src35.csv
[Tue May 14 04:09:03 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Tue May 14 04:09:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src35.csv
[Tue May 14 04:09:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:09:51 2013] Source 4 is offset by -1.481448 and -4.199816 pixels which is larger than
2 X fitted extent = 1.263766 x 1.263766, not incorporating fit results
[Tue May 14 04:09:51 2013] Warning, spatial fit 35 centroid is now closest to src. 3
[Tue May 14 04:09:52 2013] Vigneting correction estimate = 1.000000
[Tue May 14 04:09:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 04:09:52 2013] Assessing source extent using major axis lower bound
[Tue May 14 04:09:52 2013] Source does appear to be extended
[Tue May 14 04:09:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 04:10:30 2013] XMMSAS src. selection expression = ellipse(29907.836000, 35292.412000, 1091.658031, 1091.658031, 0.000000, X, Y)
[Tue May 14 04:10:30 2013] Not overwriting source region fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src4_src.reg
[Tue May 14 04:10:30 2013] Extracting stamp from image fullrun_mos1_xmm0124710401_pi300-10000_cl_sm2.00.img.gz, (282, 343) - (407, 469)
[Tue May 14 04:10:30 2013] XMMSAS bgd. selection expression = annulus(29907.836000, 35292.412000, 1819.430052, 3638.860105, X, Y) && !ellipse(30468.820923, 35883.646973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28781.788757, 35108.415588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29301.136383, 35287.677856, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 14 04:10:30 2013] Writing fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src4.gif
[Tue May 14 04:11:54 2013] Mean detx,y = (3134.92, 7765.07) 
[Tue May 14 04:11:56 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 14 04:12:47 2013] Binned source spectrum to 10 counts/bin
[Tue May 14 04:12:47 2013] Setting source spectrum file to fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue May 14 04:12:47 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src4_bgd.pi.gz