[Tue May 14 04:06:29 2013] Detection parameters:
  Position = (339.0, 251.1) = 12 59 50.32 27 26 20.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.2 +/- 15.2
  Background counts = 87.8
  Rate = 0.01 +/- 0.003

[Tue May 14 04:06:43 2013] Off-axis axis estimate = 4.52'
[Tue May 14 04:07:39 2013] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Tue May 14 04:07:39 2013] Initial guess for spatial extent in simple fitting = 8.69"
[Tue May 14 04:07:39 2013] source mask rpix=2.0, npix_max = 24, mask sum = 22, frac = 0.882
[Tue May 14 04:07:39 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 8.69"
[Tue May 14 04:07:41 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src26.ximg exists
[Tue May 14 04:07:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src26.csv
[Tue May 14 04:07:41 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src26_1.ximg exists
[Tue May 14 04:07:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src26.csv
[Tue May 14 04:07:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:07:44 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Tue May 14 04:07:44 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Tue May 14 04:07:44 2013] Fit fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Tue May 14 04:08:30 2013] Warning, spatial fit 26 centroid is now closest to src. 30
[Tue May 14 04:08:31 2013] Vigneting correction estimate = 1.000000
[Tue May 14 04:08:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 04:08:31 2013] Assessing source extent using major
[Tue May 14 04:08:31 2013] Source does appear to be extended
[Tue May 14 04:08:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 04:08:31 2013] Source is confused with source 30
[Tue May 14 04:08:58 2013] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Tue May 14 04:08:58 2013] Initial guess for spatial extent in simple fitting = 8.69"
[Tue May 14 04:08:58 2013] source mask rpix=2.0, npix_max = 24, mask sum = 22, frac = 0.882
[Tue May 14 04:08:58 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 8.69"
[Tue May 14 04:09:00 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src19.ximg exists
[Tue May 14 04:09:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src19.csv
[Tue May 14 04:09:00 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src19_1.ximg exists
[Tue May 14 04:09:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src19.csv
[Tue May 14 04:09:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:09:03 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Tue May 14 04:09:03 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Tue May 14 04:09:03 2013] Fit fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Tue May 14 04:09:51 2013] Spatial fit model total counts = 844.355000, observed total counts = 909.000000
[Tue May 14 04:09:51 2013] Offset between fit and detection position for source 27 = 4.194119 pixels
[Tue May 14 04:09:51 2013] 827.022000 total counts/ 268.899000 bgd. counts: snr = 34.035750
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 4.194119 pixels
  Position = (335.7, 248.5) = 12 59 51.40 27 26 5.4
  Extent = 17.4 (17.3-34.7)", rotation angle = 0
  Source counts = 558.1 +/- 28.8
  Background counts = 268.9
  Rate = 0.07 +/- 0.004
[Tue May 14 04:09:52 2013] Vigneting correction estimate = 1.000000
[Tue May 14 04:09:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 04:09:52 2013] Assessing source extent using major axis lower bound
[Tue May 14 04:09:52 2013] Source does appear to be extended
[Tue May 14 04:09:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 04:10:29 2013] XMMSAS src. selection expression = ellipse(29154.454000, 21572.326000, 1042.482030, 1042.482030, 0.000000, X, Y)
[Tue May 14 04:10:29 2013] Not overwriting source region fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src27_src.reg
[Tue May 14 04:10:29 2013] Extracting stamp from image fullrun_mos1_xmm0124710401_pi300-10000_cl_sm2.00.img.gz, (276, 189) - (396, 308)
[Tue May 14 04:10:29 2013] XMMSAS bgd. selection expression = annulus(29154.454000, 21572.326000, 1737.470050, 3474.940100, X, Y) && !ellipse(31875.766083, 23014.757141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33704.906036, 23078.063660, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(29003.464600, 23022.777800, 657.881619, 657.881619, 0.000000, X, Y) && !ellipse(31628.236800, 23555.384400, 727.966421, 525.368815, 78.100000, X, Y) && !ellipse(30820.360000, 24912.511000, 1346.640039, 1346.640039, 0.000000, X, Y) && !ellipse(30670.470000, 22811.729400, 1438.272041, 1438.272041, 0.000000, X, Y) && !ellipse(31077.807648, 22581.119171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27033.709600, 22527.523800, 803.424023, 803.424023, 0.000000, X, Y) && !ellipse(28758.839800, 21257.803600, 1392.096040, 619.752018, 315.645000, X, Y) && !ellipse(28246.848000, 22846.447200, 1287.968037, 1287.968037, 0.000000, X, Y) && !ellipse(29416.162000, 24395.924000, 2074.368060, 2074.368060, 0.000000, X, Y) && !ellipse(29812.107391, 18950.727692, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(25989.164000, 16989.652000, 1631.696047, 1631.696047, 0.000000, X, Y) && !ellipse(32467.403200, 16350.592000, 1816.080052, 1816.080052, 0.000000, X, Y) && !ellipse(29563.166000, 23759.567200, 1294.592037, 1294.592037, 0.000000, X, Y)
[Tue May 14 04:10:29 2013] Writing fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src27.gif
[Tue May 14 04:10:42 2013] ../../xmm0124710401/products/events/fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src27_src.evt and ../../xmm0124710401/products/events/fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src27_bgd.evt exist, delete to re-create
[Tue May 14 04:10:42 2013] Mean detx,y = (-7112.74, -1768.77) 
[Tue May 14 04:10:42 2013] ../../xmm0124710401/products/images/fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src27_src.img and ../../xmm0124710401/products/images/fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src27_bgd.img exist, delete to re-create
[Tue May 14 04:10:42 2013] ../../xmm0124710401/products/spectra/fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src27_src.pi and ../../xmm0124710401/products/spectra/fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src27_bgd.pi exist, delete to re-create
[Tue May 14 04:10:42 2013] Setting source spectrum file to fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src27_src.pi.gz
[Tue May 14 04:10:42 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Tue May 14 04:10:42 2013] ../../xmm0124710401/products/lightcurves/fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src27_src.lc and ../../xmm0124710401/products/lightcurves/fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src27_bgd.lc exist, delete to re-create