[Tue May 14 04:06:41 2013] Detection parameters:
  Position = (345.6, 158.0) = 12 59 48.16 27 19 31.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.2 +/- 18.5
  Background counts = 64.5
  Rate = 0.01 +/- 0.002

[Tue May 14 04:06:43 2013] Off-axis axis estimate = 10.74'
[Tue May 14 04:07:39 2013] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Tue May 14 04:07:39 2013] Initial guess for spatial extent in simple fitting = 11.80"
[Tue May 14 04:07:39 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.018
[Tue May 14 04:07:39 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 11.80"
[Tue May 14 04:07:41 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src25.ximg exists
[Tue May 14 04:07:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src25.csv
[Tue May 14 04:07:41 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src25_1.ximg exists
[Tue May 14 04:07:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src25.csv
[Tue May 14 04:07:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:07:44 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Tue May 14 04:07:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src25.csv
[Tue May 14 04:07:44 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Tue May 14 04:07:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src25.csv
[Tue May 14 04:07:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:08:30 2013] Warning, spatial fit 25 centroid is now closest to src. 123
[Tue May 14 04:08:31 2013] Vigneting correction estimate = 1.000000
[Tue May 14 04:08:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 04:08:31 2013] Assessing source extent using major
[Tue May 14 04:08:31 2013] Source does appear to be extended
[Tue May 14 04:08:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 04:08:31 2013] Source is confused with source 159
[Tue May 14 04:08:58 2013] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Tue May 14 04:08:58 2013] Initial guess for spatial extent in simple fitting = 11.80"
[Tue May 14 04:08:58 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.018
[Tue May 14 04:08:58 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 11.80"
[Tue May 14 04:09:00 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src18.ximg exists
[Tue May 14 04:09:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src18.csv
[Tue May 14 04:09:00 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src18_1.ximg exists
[Tue May 14 04:09:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src18.csv
[Tue May 14 04:09:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:09:02 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Tue May 14 04:09:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src18.csv
[Tue May 14 04:09:02 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Tue May 14 04:09:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src18.csv
[Tue May 14 04:09:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:09:51 2013] Spatial fit model total counts = 1332.720000, observed total counts = 1185.000000
[Tue May 14 04:09:51 2013] Poor agreement between spatial fit and data for source 158
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 14 04:09:52 2013] Spatial fit model total counts = 5076.020000, observed total counts = 4589.000000
[Tue May 14 04:09:52 2013] Poor agreement between spatial fit and data for source 158
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 14 04:09:52 2013] Vigneting correction estimate = 1.000000
[Tue May 14 04:09:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 04:09:52 2013] Assessing source extent using major
[Tue May 14 04:09:52 2013] Source does appear to be extended
[Tue May 14 04:09:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 04:10:29 2013] XMMSAS src. selection expression = ellipse(30019.945740, 13698.285889, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 14 04:10:29 2013] Not overwriting source region fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src158_src.reg
[Tue May 14 04:10:29 2013] Extracting stamp from image fullrun_mos1_xmm0124710401_pi300-10000_cl_sm2.00.img.gz, (308, 121) - (383, 196)
[Tue May 14 04:10:29 2013] XMMSAS bgd. selection expression = annulus(30019.945740, 13698.285889, 1087.500000, 2175.000000, X, Y) && !ellipse(27607.936584, 14230.263489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29572.530823, 14726.051712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28506.348000, 13907.911000, 1674.752048, 1674.752048, 0.000000, X, Y) && !ellipse(31213.487610, 14052.622116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32049.519165, 13874.068741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28283.204200, 16514.392000, 650.214419, 650.214419, 0.000000, X, Y) && !ellipse(32517.322052, 14310.181198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28919.356000, 14765.878800, 1813.368052, 1813.368052, 0.000000, X, Y) && !ellipse(30548.015137, 14630.153381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31088.607200, 14745.756000, 1894.720055, 1894.720055, 0.000000, X, Y) && !ellipse(31844.391602, 13350.057556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27988.043854, 14793.538574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27547.930267, 13524.516876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31871.682648, 12910.838715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31323.785400, 12294.824000, 1998.952058, 986.224028, 158.276900, X, Y) && !ellipse(31220.644000, 16164.632000, 1119.800032, 1119.800032, 0.000000, X, Y) && !ellipse(26999.005615, 15434.732132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32467.403200, 16350.592000, 1816.080052, 1816.080052, 0.000000, X, Y) && !ellipse(32362.784000, 13195.792000, 1982.152057, 1982.152057, 0.000000, X, Y) && !ellipse(33653.332000, 13438.430000, 2007.640058, 2007.640058, 0.000000, X, Y) && !ellipse(30784.105652, 12913.184433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32187.854156, 14741.715057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32927.656830, 15416.340744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27742.230621, 15183.861069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27261.829620, 16401.156158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28120.084000, 13828.240000, 1861.776054, 1861.776054, 0.000000, X, Y) && !ellipse(27222.634000, 13944.272000, 1792.136052, 1792.136052, 0.000000, X, Y) && !ellipse(31286.827484, 13354.332153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29701.056000, 13916.928000, 1900.736055, 1900.736055, 0.000000, X, Y) && !ellipse(26031.974000, 12795.898000, 1878.440054, 1878.440054, 0.000000, X, Y)
[Tue May 14 04:10:29 2013] Writing fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src158.gif
[Tue May 14 04:10:42 2013] ../../xmm0124710401/products/events/fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src158_src.evt and ../../xmm0124710401/products/events/fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src158_bgd.evt exist, delete to re-create
[Tue May 14 04:10:42 2013] Mean detx,y = (-13316.14, -6174.27) 
[Tue May 14 04:10:42 2013] ../../xmm0124710401/products/images/fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src158_src.img and ../../xmm0124710401/products/images/fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src158_bgd.img exist, delete to re-create
[Tue May 14 04:10:42 2013] ../../xmm0124710401/products/spectra/fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src158_src.pi and ../../xmm0124710401/products/spectra/fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src158_bgd.pi exist, delete to re-create
[Tue May 14 04:10:42 2013] Setting source spectrum file to fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src158_src.pi.gz
[Tue May 14 04:10:42 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src158_bgd.pi.gz
[Tue May 14 04:10:42 2013] ../../xmm0124710401/products/lightcurves/fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src158_src.lc and ../../xmm0124710401/products/lightcurves/fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src158_bgd.lc exist, delete to re-create