[Tue May 14 04:06:40 2013] Detection parameters:
  Position = (220.0, 163.0) = 13 0 29.15 27 19 51.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.6 +/- 15.2
  Background counts = 24.4
  Rate = 0.01 +/- 0.002

[Tue May 14 04:06:43 2013] Off-axis axis estimate = 11.34'
[Tue May 14 04:07:40 2013] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting
[Tue May 14 04:07:40 2013] Initial guess for spatial extent in simple fitting = 12.10"
[Tue May 14 04:07:40 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.836
[Tue May 14 04:07:40 2013] Giving source the simple spatial ID 84 for pass 0, mean size = 12.10"
[Tue May 14 04:07:43 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src84.ximg exists
[Tue May 14 04:07:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src84.csv
[Tue May 14 04:07:43 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src84_1.ximg exists
[Tue May 14 04:07:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src84.csv
[Tue May 14 04:07:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src84_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:07:46 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src84.ximg exists
[Tue May 14 04:07:46 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src84_1.ximg exists
[Tue May 14 04:07:46 2013] Fit fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src84 appears to have run properly
[Tue May 14 04:08:31 2013] Source 146 is offset by -0.466795 and 8.903970 pixels which is larger than
2 X fitted extent = 1.390846 x 1.390846, not incorporating fit results
[Tue May 14 04:08:31 2013] Vigneting correction estimate = 1.000000
[Tue May 14 04:08:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 04:08:31 2013] Assessing source extent using major
[Tue May 14 04:08:31 2013] Source does appear to be extended
[Tue May 14 04:08:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 04:08:31 2013] Source is confused with source 139
[Tue May 14 04:08:58 2013] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting
[Tue May 14 04:08:58 2013] Initial guess for spatial extent in simple fitting = 12.10"
[Tue May 14 04:08:58 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.836
[Tue May 14 04:08:58 2013] Giving source the simple spatial ID 71 for pass 1, mean size = 12.10"
[Tue May 14 04:09:01 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src71.ximg exists
[Tue May 14 04:09:01 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src71_1.ximg exists
[Tue May 14 04:09:01 2013] Fit fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src71 appears to have run properly
[Tue May 14 04:09:04 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Tue May 14 04:09:04 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Tue May 14 04:09:04 2013] Fit fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src71 appears to have run properly
[Tue May 14 04:09:52 2013] Warning, spatial fit 71 centroid is now closest to src. 103
[Tue May 14 04:09:52 2013] Vigneting correction estimate = 1.000000
[Tue May 14 04:09:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 04:09:52 2013] Assessing source extent using major
[Tue May 14 04:09:52 2013] Source does appear to be extended
[Tue May 14 04:09:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 04:10:33 2013] XMMSAS src. selection expression = ellipse(19095.825043, 14134.767395, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 14 04:10:33 2013] Not overwriting source region fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src146_src.reg
[Tue May 14 04:10:33 2013] Extracting stamp from image fullrun_mos1_xmm0124710401_pi300-10000_cl_sm2.00.img.gz, (183, 126) - (258, 201)
[Tue May 14 04:10:33 2013] XMMSAS bgd. selection expression = annulus(19095.825043, 14134.767395, 1087.500000, 2175.000000, X, Y) && !ellipse(17567.133912, 16195.269420, 603.964017, 603.964017, 0.000000, X, Y) && !ellipse(20840.124863, 15341.379974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21855.580643, 15084.302780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17685.903595, 15351.616440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18987.310013, 14485.324188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19339.980000, 17535.412000, 1768.512051, 1768.512051, 0.000000, X, Y) && !ellipse(18731.884247, 16653.994598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18673.246597, 15262.428696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20584.178000, 16677.430000, 1738.344050, 1738.344050, 0.000000, X, Y) && !ellipse(20738.414673, 14309.646210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18060.264053, 16754.539230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20124.330292, 15162.550476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18422.464478, 14388.897507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21708.497330, 15612.572632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20513.570862, 15703.224625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21553.971970, 14307.792999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18124.218399, 16135.963867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21458.673676, 16133.241135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18734.952133, 16038.407471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17532.217224, 17079.713943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17294.888138, 16638.677734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16883.346649, 16226.278671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17056.216934, 15703.563141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20169.264000, 16757.724000, 1756.896051, 1756.896051, 0.000000, X, Y) && !ellipse(19528.497910, 16037.800797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18263.774704, 13965.014114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19904.083664, 13870.732697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21062.628265, 13438.789963, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 14 04:10:33 2013] Writing fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src146.gif
[Tue May 14 04:27:16 2013] Mean detx,y = (-5824.20, -14210.08) 
[Tue May 14 04:27:18 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 14 04:27:44 2013] Binned source spectrum to 10 counts/bin
[Tue May 14 04:27:44 2013] Setting source spectrum file to fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src146_src_b10.pi.gz
[Tue May 14 04:27:44 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src146_bgd.pi.gz