[Tue May 14 04:06:39 2013] Detection parameters:
  Position = (272.2, 168.0) = 13 0 12.12 27 20 14.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.1 +/- 17.7
  Background counts = 54.6
  Rate = 0.01 +/- 0.002

[Tue May 14 04:06:43 2013] Off-axis axis estimate = 9.64'
[Tue May 14 04:07:39 2013] Using EEF radius (= 11.25 ")to estimate initial spatial extent for simple fitting
[Tue May 14 04:07:39 2013] Initial guess for spatial extent in simple fitting = 11.25"
[Tue May 14 04:07:39 2013] source mask rpix=2.6, npix_max = 38, mask sum = 33, frac = 0.866
[Tue May 14 04:07:39 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 11.25"
[Tue May 14 04:07:41 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src19.ximg exists
[Tue May 14 04:07:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src19.csv
[Tue May 14 04:07:41 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue May 14 04:07:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src19.csv
[Tue May 14 04:07:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:07:44 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue May 14 04:07:44 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue May 14 04:07:44 2013] Fit fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Tue May 14 04:08:30 2013] Spatial fit model total counts = 1044.720000, observed total counts = 1028.000000
[Tue May 14 04:08:30 2013] Offset between fit and detection position for source 131 = 0.130946 pixels
[Tue May 14 04:08:30 2013] 1019.985600 total counts/ 975.403000 bgd. counts: snr = 1.427491
Spatial fit parameters:
  Offset between fit and detection position for source 131 = 0.130946 pixels
  Position = (272.3, 168.0) = 13 0 12.08 27 20 15.2
  Extent = 6.3 (3.3-11.5)", rotation angle = 0
  Source counts = 44.6 +/- 31.9
  Background counts = 975.4
  Rate = 0.005 +/- 0.004
  Deleting source due to low Poisson probability