[Tue May 14 04:06:38 2013] Detection parameters:
  Position = (360.8, 168.0) = 12 59 43.20 27 20 13.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.6 +/- 18.7
  Background counts = 69.0
  Rate = 0.01 +/- 0.002

[Tue May 14 04:06:43 2013] Off-axis axis estimate = 10.48'
[Tue May 14 04:07:39 2013] Using EEF radius (= 11.67 ")to estimate initial spatial extent for simple fitting
[Tue May 14 04:07:39 2013] Initial guess for spatial extent in simple fitting = 11.67"
[Tue May 14 04:07:39 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.888
[Tue May 14 04:07:40 2013] Giving source the simple spatial ID 58 for pass 0, mean size = 11.67"
[Tue May 14 04:07:42 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src58.ximg exists
[Tue May 14 04:07:42 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src58_1.ximg exists
[Tue May 14 04:07:42 2013] Fit fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src58 appears to have run properly
[Tue May 14 04:07:45 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Tue May 14 04:07:45 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Tue May 14 04:07:45 2013] Fit fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src58 appears to have run properly
[Tue May 14 04:08:31 2013] Spatial fit model total counts = 1354.990000, observed total counts = 1355.000000
[Tue May 14 04:08:31 2013] Offset between fit and detection position for source 122 = 5.061590 pixels
[Tue May 14 04:08:31 2013] Warning, changing simple spatial fit ID from 58 to 53
[Tue May 14 04:08:31 2013] 1163.363000 total counts/ 800.630000 bgd. counts: snr = 12.819502
Spatial fit parameters:
  Offset between fit and detection position for source 122 = 5.061590 pixels
  Position = (356.6, 170.8) = 12 59 44.58 27 20 27.1
  Extent = 23.0 (2.9-46.0)", rotation angle = 0
  Source counts = 362.7 +/- 34.1
  Background counts = 800.6
  Rate = 0.04 +/- 0.004
[Tue May 14 04:08:31 2013] Vigneting correction estimate = 1.000000
[Tue May 14 04:08:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 04:08:31 2013] Assessing source extent using major axis lower bound
[Tue May 14 04:08:31 2013] Source does appear to be extended
[Tue May 14 04:08:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 04:08:31 2013] Source is confused with source 147
[Tue May 14 04:08:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 14 04:08:58 2013] Initial guess for spatial extent in simple fitting = 23.02"
[Tue May 14 04:08:58 2013] source mask rpix=5.3, npix_max = 134, mask sum = 132, frac = 0.983
[Tue May 14 04:08:58 2013] Giving source the simple spatial ID 48 for pass 1, mean size = 23.02"
[Tue May 14 04:09:00 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src48.ximg exists
[Tue May 14 04:09:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src48.csv
[Tue May 14 04:09:01 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src48_1.ximg exists
[Tue May 14 04:09:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src48.csv
[Tue May 14 04:09:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:09:03 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Tue May 14 04:09:03 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Tue May 14 04:09:03 2013] Fit fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Tue May 14 04:09:51 2013] Spatial fit model total counts = 1353.750000, observed total counts = 1354.000000
[Tue May 14 04:09:51 2013] Offset between fit and detection position for source 122 = 1.499269 pixels
[Tue May 14 04:09:51 2013] Warning, changing simple spatial fit ID from 48 to 26
[Tue May 14 04:09:51 2013] 1302.629000 total counts/ 1105.490000 bgd. counts: snr = 5.929187
Spatial fit parameters:
  Offset between fit and detection position for source 122 = 1.499269 pixels
  Position = (357.9, 170.0) = 12 59 44.15 27 20 24.0
  Extent = 23.7 (23.6-47.4)", rotation angle = 0
  Source counts = 197.1 +/- 36.1
  Background counts = 1105.5
  Rate = 0.02 +/- 0.004
[Tue May 14 04:09:52 2013] Vigneting correction estimate = 1.000000
[Tue May 14 04:09:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 04:09:52 2013] Assessing source extent using major axis lower bound
[Tue May 14 04:09:52 2013] Source does appear to be extended
[Tue May 14 04:09:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 04:10:31 2013] XMMSAS src. selection expression = ellipse(31088.607200, 14745.756000, 1421.040041, 1421.040041, 0.000000, X, Y)
[Tue May 14 04:10:31 2013] Not overwriting source region fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src122_src.reg
[Tue May 14 04:10:31 2013] Extracting stamp from image fullrun_mos1_xmm0124710401_pi300-10000_cl_sm2.00.img.gz, (276, 88) - (440, 252)
[Tue May 14 04:10:31 2013] XMMSAS bgd. selection expression = annulus(31088.607200, 14745.756000, 2368.400068, 4736.800136, X, Y) && !ellipse(27607.936584, 14230.263489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29572.530823, 14726.051712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30019.945740, 13698.285889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28506.348000, 13907.911000, 1674.752048, 1674.752048, 0.000000, X, Y) && !ellipse(31213.487610, 14052.622116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32049.519165, 13874.068741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28283.204200, 16514.392000, 650.214419, 650.214419, 0.000000, X, Y) && !ellipse(32517.322052, 14310.181198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35164.218994, 15347.911346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28919.356000, 14765.878800, 1813.368052, 1813.368052, 0.000000, X, Y) && !ellipse(30548.015137, 14630.153381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31844.391602, 13350.057556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27988.043854, 14793.538574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27547.930267, 13524.516876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29812.107391, 18950.727692, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(31871.682648, 12910.838715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31323.785400, 12294.824000, 1998.952058, 986.224028, 158.276900, X, Y) && !ellipse(31220.644000, 16164.632000, 1119.800032, 1119.800032, 0.000000, X, Y) && !ellipse(26999.005615, 15434.732132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25989.164000, 16989.652000, 1631.696047, 1631.696047, 0.000000, X, Y) && !ellipse(32467.403200, 16350.592000, 1816.080052, 1816.080052, 0.000000, X, Y) && !ellipse(25793.354156, 13168.012817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32362.784000, 13195.792000, 1982.152057, 1982.152057, 0.000000, X, Y) && !ellipse(33653.332000, 13438.430000, 2007.640058, 2007.640058, 0.000000, X, Y) && !ellipse(26766.908264, 14476.822784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25385.600000, 15453.146000, 1713.008049, 1713.008049, 0.000000, X, Y) && !ellipse(33841.719696, 14472.584030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30784.105652, 12913.184433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32187.854156, 14741.715057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32927.656830, 15416.340744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27742.230621, 15183.861069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27261.829620, 16401.156158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28120.084000, 13828.240000, 1861.776054, 1861.776054, 0.000000, X, Y) && !ellipse(36861.910000, 17252.951800, 1944.136056, 1944.136056, 0.000000, X, Y) && !ellipse(27222.634000, 13944.272000, 1792.136052, 1792.136052, 0.000000, X, Y) && !ellipse(34802.420807, 15010.025681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25691.346000, 14054.634000, 1786.632051, 1786.632051, 0.000000, X, Y) && !ellipse(35800.095856, 15700.860321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34695.930237, 14064.021484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31286.827484, 13354.332153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35640.547180, 14813.193756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29701.056000, 13916.928000, 1900.736055, 1900.736055, 0.000000, X, Y) && !ellipse(26031.974000, 12795.898000, 1878.440054, 1878.440054, 0.000000, X, Y) && !ellipse(26318.577362, 13034.561752, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 14 04:10:31 2013] Writing fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src122.gif
[Tue May 14 04:18:09 2013] Mean detx,y = (-13186.78, -4727.07) 
[Tue May 14 04:18:10 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 14 04:18:29 2013] Binned source spectrum to 10 counts/bin
[Tue May 14 04:18:30 2013] Setting source spectrum file to fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src122_src_b10.pi.gz
[Tue May 14 04:18:30 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src122_bgd.pi.gz