[Tue May 14 04:06:38 2013] Detection parameters:
  Position = (322.3, 170.6) = 12 59 55.78 27 20 31.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.7 +/- 15.8
  Background counts = 81.0
  Rate = 0.01 +/- 0.002

[Tue May 14 04:06:43 2013] Off-axis axis estimate = 9.43'
[Tue May 14 04:07:40 2013] Using EEF radius (= 11.14 ")to estimate initial spatial extent for simple fitting
[Tue May 14 04:07:40 2013] Initial guess for spatial extent in simple fitting = 11.14"
[Tue May 14 04:07:40 2013] source mask rpix=2.6, npix_max = 37, mask sum = 33, frac = 0.880
[Tue May 14 04:07:40 2013] Giving source the simple spatial ID 67 for pass 0, mean size = 11.14"
[Tue May 14 04:07:42 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src67.ximg exists
[Tue May 14 04:07:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src67.csv
[Tue May 14 04:07:42 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src67_1.ximg exists
[Tue May 14 04:07:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src67.csv
[Tue May 14 04:07:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:07:45 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Tue May 14 04:07:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src67.csv
[Tue May 14 04:07:45 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Tue May 14 04:07:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src67.csv
[Tue May 14 04:07:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:08:31 2013] Spatial fit model total counts = 1427.220000, observed total counts = 1180.000000
[Tue May 14 04:08:31 2013] Poor agreement between spatial fit and data for source 119
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 14 04:08:31 2013] Vigneting correction estimate = 1.000000
[Tue May 14 04:08:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 04:08:31 2013] Assessing source extent using major
[Tue May 14 04:08:31 2013] Source does appear to be extended
[Tue May 14 04:08:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 04:08:31 2013] Source is confused with source 121
[Tue May 14 04:08:31 2013] Source is confused with source 99
[Tue May 14 04:08:31 2013] Source is confused with source 150
[Tue May 14 04:08:58 2013] Using EEF radius (= 11.14 ")to estimate initial spatial extent for simple fitting
[Tue May 14 04:08:58 2013] Initial guess for spatial extent in simple fitting = 11.14"
[Tue May 14 04:08:58 2013] source mask rpix=2.6, npix_max = 37, mask sum = 33, frac = 0.880
[Tue May 14 04:08:58 2013] Giving source the simple spatial ID 56 for pass 1, mean size = 11.14"
[Tue May 14 04:09:01 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src56.ximg exists
[Tue May 14 04:09:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src56.csv
[Tue May 14 04:09:01 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src56_1.ximg exists
[Tue May 14 04:09:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src56.csv
[Tue May 14 04:09:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:09:04 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Tue May 14 04:09:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src56.csv
[Tue May 14 04:09:04 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Tue May 14 04:09:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src56.csv
[Tue May 14 04:09:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:09:52 2013] Warning, spatial fit 56 centroid is now closest to src. 129
[Tue May 14 04:09:52 2013] Vigneting correction estimate = 1.000000
[Tue May 14 04:09:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 04:09:52 2013] Assessing source extent using major
[Tue May 14 04:09:52 2013] Source does appear to be extended
[Tue May 14 04:09:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 04:10:32 2013] XMMSAS src. selection expression = ellipse(27988.043854, 14793.538574, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 14 04:10:32 2013] Not overwriting source region fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src119_src.reg
[Tue May 14 04:10:32 2013] Extracting stamp from image fullrun_mos1_xmm0124710401_pi300-10000_cl_sm2.00.img.gz, (285, 133) - (360, 208)
[Tue May 14 04:10:32 2013] XMMSAS bgd. selection expression = annulus(27988.043854, 14793.538574, 1087.500000, 2175.000000, X, Y) && !ellipse(27607.936584, 14230.263489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29572.530823, 14726.051712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30019.945740, 13698.285889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28506.348000, 13907.911000, 1674.752048, 1674.752048, 0.000000, X, Y) && !ellipse(28283.204200, 16514.392000, 650.214419, 650.214419, 0.000000, X, Y) && !ellipse(28919.356000, 14765.878800, 1813.368052, 1813.368052, 0.000000, X, Y) && !ellipse(30548.015137, 14630.153381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31088.607200, 14745.756000, 1894.720055, 1894.720055, 0.000000, X, Y) && !ellipse(27547.930267, 13524.516876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31323.785400, 12294.824000, 1998.952058, 986.224028, 158.276900, X, Y) && !ellipse(31220.644000, 16164.632000, 1119.800032, 1119.800032, 0.000000, X, Y) && !ellipse(26999.005615, 15434.732132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25989.164000, 16989.652000, 1631.696047, 1631.696047, 0.000000, X, Y) && !ellipse(25793.354156, 13168.012817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26766.908264, 14476.822784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24327.658400, 15992.716000, 1718.728049, 1718.728049, 0.000000, X, Y) && !ellipse(25385.600000, 15453.146000, 1713.008049, 1713.008049, 0.000000, X, Y) && !ellipse(25027.346344, 16127.397415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30784.105652, 12913.184433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27742.230621, 15183.861069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27261.829620, 16401.156158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28120.084000, 13828.240000, 1861.776054, 1861.776054, 0.000000, X, Y) && !ellipse(27222.634000, 13944.272000, 1792.136052, 1792.136052, 0.000000, X, Y) && !ellipse(25691.346000, 14054.634000, 1786.632051, 1786.632051, 0.000000, X, Y) && !ellipse(25201.951691, 14477.830368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29701.056000, 13916.928000, 1900.736055, 1900.736055, 0.000000, X, Y) && !ellipse(26031.974000, 12795.898000, 1878.440054, 1878.440054, 0.000000, X, Y) && !ellipse(26318.577362, 13034.561752, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 14 04:10:32 2013] Writing fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src119.gif
[Tue May 14 04:20:24 2013] Mean detx,y = (-11172.38, -7134.18) 
[Tue May 14 04:20:26 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 14 04:20:44 2013] Binned source spectrum to 10 counts/bin
[Tue May 14 04:20:44 2013] Setting source spectrum file to fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src119_src_b10.pi.gz
[Tue May 14 04:20:44 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src119_bgd.pi.gz