[Tue May 14 04:06:28 2013] Detection parameters:
  Position = (351.4, 284.1) = 12 59 46.26 27 28 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.7 +/- 16.7
  Background counts = 83.0
  Rate = 0.02 +/- 0.003

[Tue May 14 04:06:43 2013] Off-axis axis estimate = 3.98'
[Tue May 14 04:07:39 2013] Using EEF radius (= 8.42 ")to estimate initial spatial extent for simple fitting
[Tue May 14 04:07:39 2013] Initial guess for spatial extent in simple fitting = 8.42"
[Tue May 14 04:07:39 2013] source mask rpix=1.9, npix_max = 23, mask sum = 19, frac = 0.801
[Tue May 14 04:07:39 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 8.42"
[Tue May 14 04:07:41 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src11.ximg exists
[Tue May 14 04:07:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src11.csv
[Tue May 14 04:07:41 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue May 14 04:07:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src11.csv
[Tue May 14 04:07:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:07:44 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue May 14 04:07:44 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue May 14 04:07:44 2013] Fit fullrun_mos1_xmm0124710401_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Tue May 14 04:08:30 2013] Spatial fit model total counts = 1086.120000, observed total counts = 1113.000000
[Tue May 14 04:08:30 2013] Offset between fit and detection position for source 10 = 4.482103 pixels
[Tue May 14 04:08:30 2013] 1056.800000 total counts/ 751.989000 bgd. counts: snr = 11.115395
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 4.482103 pixels
  Position = (354.8, 286.9) = 12 59 45.13 27 28 52.4
  Extent = 16.8 (16.8-33.7)", rotation angle = 0
  Source counts = 304.8 +/- 32.5
  Background counts = 752.0
  Rate = 0.04 +/- 0.004
[Tue May 14 04:08:31 2013] Vigneting correction estimate = 1.000000
[Tue May 14 04:08:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 04:08:31 2013] Assessing source extent using major axis lower bound
[Tue May 14 04:08:31 2013] Source does appear to be extended
[Tue May 14 04:08:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 04:08:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 14 04:08:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 14 04:08:58 2013] Initial guess for spatial extent in simple fitting = 16.83"
[Tue May 14 04:08:58 2013] source mask rpix=3.9, npix_max = 76, mask sum = 63, frac = 0.825
[Tue May 14 04:08:58 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 16.83"
[Tue May 14 04:09:00 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src11.ximg exists
[Tue May 14 04:09:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src11.csv
[Tue May 14 04:09:00 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue May 14 04:09:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src11.csv
[Tue May 14 04:09:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:09:02 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue May 14 04:09:02 2013] fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue May 14 04:09:02 2013] Fit fullrun_mos1_xmm0124710401_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Tue May 14 04:09:51 2013] Warning, spatial fit 11 centroid is now closest to src. 11
[Tue May 14 04:09:52 2013] Vigneting correction estimate = 1.000000
[Tue May 14 04:09:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 04:09:52 2013] Assessing source extent using major axis lower bound
[Tue May 14 04:09:52 2013] Source does appear to be extended
[Tue May 14 04:09:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 04:09:52 2013] Source is confused with source 11
[Tue May 14 04:10:28 2013] XMMSAS src. selection expression = ellipse(30820.360000, 24912.511000, 1009.980029, 1009.980029, 0.000000, X, Y)
[Tue May 14 04:10:28 2013] Not overwriting source region fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src10_src.reg
[Tue May 14 04:10:28 2013] Extracting stamp from image fullrun_mos1_xmm0124710401_pi300-10000_cl_sm2.00.img.gz, (297, 229) - (413, 345)
[Tue May 14 04:10:28 2013] XMMSAS bgd. selection expression = annulus(30820.360000, 24912.511000, 1683.300048, 3366.600097, X, Y) && !ellipse(31875.766083, 23014.757141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33704.906036, 23078.063660, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(29003.464600, 23022.777800, 657.881619, 657.881619, 0.000000, X, Y) && !ellipse(31628.236800, 23555.384400, 727.966421, 525.368815, 78.100000, X, Y) && !ellipse(30670.470000, 22811.729400, 1438.272041, 1438.272041, 0.000000, X, Y) && !ellipse(29154.454000, 21572.326000, 1389.976040, 1389.976040, 0.000000, X, Y) && !ellipse(31077.807648, 22581.119171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27033.709600, 22527.523800, 803.424023, 803.424023, 0.000000, X, Y) && !ellipse(28758.839800, 21257.803600, 1392.096040, 619.752018, 315.645000, X, Y) && !ellipse(28246.848000, 22846.447200, 1287.968037, 1287.968037, 0.000000, X, Y) && !ellipse(29416.162000, 24395.924000, 2074.368060, 2074.368060, 0.000000, X, Y) && !ellipse(29563.166000, 23759.567200, 1294.592037, 1294.592037, 0.000000, X, Y)
[Tue May 14 04:10:28 2013] Writing fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src10.gif
[Tue May 14 04:10:42 2013] ../../xmm0124710401/products/events/fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0124710401/products/events/fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Tue May 14 04:10:42 2013] Mean detx,y = (-5175.75, 1683.36) 
[Tue May 14 04:10:42 2013] ../../xmm0124710401/products/images/fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src10_src.img and ../../xmm0124710401/products/images/fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Tue May 14 04:10:42 2013] ../../xmm0124710401/products/spectra/fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src10_src.pi and ../../xmm0124710401/products/spectra/fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Tue May 14 04:10:42 2013] Setting source spectrum file to fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src10_src.pi.gz
[Tue May 14 04:10:42 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue May 14 04:10:42 2013] ../../xmm0124710401/products/lightcurves/fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0124710401/products/lightcurves/fullrun_mos1_xmm0124710401_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create