[Tue May 21 13:52:41 2013] Detection parameters:
  Position = (376.5, 363.1) = 12 20 3.48 75 21 47.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 182.8 +/- 17.2
  Background counts = 23.2
  Rate = 0.02 +/- 0.002

[Tue May 21 13:52:44 2013] Off-axis axis estimate = 7.35'
[Tue May 21 13:54:56 2013] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Tue May 21 13:54:56 2013] Initial guess for spatial extent in simple fitting = 10.10"
[Tue May 21 13:54:56 2013] source mask rpix=2.3, npix_max = 31, mask sum = 26, frac = 0.816
[Tue May 21 13:54:56 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 10.10"
[Tue May 21 17:28:39 2013] fullrun_pn_xmm0124110101_pi300-10000_cl_pass0_src8.ximg exists
[Tue May 21 17:28:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0124110101_pi300-10000_cl_pass0_src8.csv
[Tue May 21 17:28:39 2013] fullrun_pn_xmm0124110101_pi300-10000_cl_pass0_src8_1.ximg exists
[Tue May 21 17:28:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0124110101_pi300-10000_cl_pass0_src8.csv
[Tue May 21 17:28:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0124110101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0124110101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 17:28:41 2013] fullrun_pn_xmm0124110101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Tue May 21 17:28:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0124110101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Tue May 21 17:28:41 2013] fullrun_pn_xmm0124110101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Tue May 21 17:28:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0124110101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Tue May 21 17:28:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0124110101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0124110101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:14:12 2013] Source 8 is offset by -0.860460 and -4.516890 pixels which is larger than
2 X fitted extent = 1.176184 x 1.176184, not incorporating fit results
[Tue May 21 18:14:12 2013] Warning, spatial fit 8 centroid is now closest to src. 9
[Tue May 21 18:14:12 2013] Vigneting correction estimate = 1.000000
[Tue May 21 18:14:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 18:14:12 2013] Assessing source extent using major
[Tue May 21 18:14:12 2013] Source does appear to be extended
[Tue May 21 18:14:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 18:14:27 2013] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Tue May 21 18:14:27 2013] Initial guess for spatial extent in simple fitting = 10.10"
[Tue May 21 18:14:27 2013] source mask rpix=2.3, npix_max = 31, mask sum = 26, frac = 0.816
[Tue May 21 18:14:27 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 10.10"
[Tue May 21 22:04:00 2013] fullrun_pn_xmm0124110101_pi300-10000_cl_pass1_src7.ximg exists
[Tue May 21 22:04:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0124110101_pi300-10000_cl_pass1_src7.csv
[Tue May 21 22:04:00 2013] fullrun_pn_xmm0124110101_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue May 21 22:04:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0124110101_pi300-10000_cl_pass1_src7.csv
[Tue May 21 22:04:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0124110101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0124110101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 22:04:01 2013] fullrun_pn_xmm0124110101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue May 21 22:04:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0124110101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Tue May 21 22:04:01 2013] fullrun_pn_xmm0124110101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue May 21 22:04:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0124110101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Tue May 21 22:04:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0124110101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0124110101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 22:33:31 2013] Source 8 is offset by -0.860460 and -4.516890 pixels which is larger than
2 X fitted extent = 1.176184 x 1.176184, not incorporating fit results
[Tue May 21 22:33:31 2013] Warning, spatial fit 7 centroid is now closest to src. 9
[Tue May 21 22:33:31 2013] Spatial fit model total counts = 710.258000, observed total counts = 505.000000
[Tue May 21 22:33:31 2013] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 21 22:33:31 2013] Vigneting correction estimate = 1.000000
[Tue May 21 22:33:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 22:33:31 2013] Assessing source extent using major
[Tue May 21 22:33:31 2013] Source does appear to be extended
[Tue May 21 22:33:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 22:33:44 2013] XMMSAS src. selection expression = ellipse(32711.263977, 31538.906586, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 21 22:33:44 2013] Writing source region out to fullrun_pn_xmm0124110101_pi300-10000_pass1_cl_src8_src.reg
[Tue May 21 22:33:44 2013] Extracting stamp from image fullrun_pn_xmm0124110101_pi300-10000_cl_sm2.00.img.gz, (339, 326) - (414, 401)
[Tue May 21 22:33:44 2013] XMMSAS bgd. selection expression = annulus(32711.263977, 31538.906586, 1087.500000, 2175.000000, X, Y) && !ellipse(31978.213043, 32742.118073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31642.768677, 32123.562622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30617.548000, 30898.952000, 1520.832044, 1520.832044, 0.000000, X, Y) && !ellipse(32633.812800, 30740.558600, 420.040812, 420.040812, 0.000000, X, Y) && !ellipse(31525.963318, 33042.877136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32938.314117, 32305.283447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30410.370453, 31616.807800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33286.173401, 31927.486053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29547.872000, 29876.330000, 3041.664088, 3041.664088, 0.000000, X, Y)
[Tue May 21 22:33:44 2013] Writing fullrun_pn_xmm0124110101_pi300-10000_pass1_cl_src8.gif
[Tue May 21 22:43:00 2013] Mean detx,y = (7295.00, 4016.23) 
[Tue May 21 22:43:02 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 22:43:20 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 22:43:20 2013] Setting source spectrum file to fullrun_pn_xmm0124110101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue May 21 22:43:20 2013] Setting bgd. spectrum file to fullrun_pn_xmm0124110101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed May 22 00:02:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 00:02:07 2013] rmf not generated due to insufficient counts
[Wed May 22 02:40:22 2013] Updating aperture counts using extracted products
[Wed May 22 02:40:22 2013] Total counts from fullrun_pn_xmm0124110101_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 550.00
[Wed May 22 02:40:22 2013] Total counts from fullrun_pn_xmm0124110101_pi300-10000_pass1_cl_src8_bgd.pi.gz = 639.00
[Wed May 22 02:40:22 2013] Got source and background scale factors 1056086.000000, 4312488.000000
[Wed May 22 02:40:22 2013] User source parameters:
  Position = (376.5, 363.1) = 12 20 3.48 75 21 47.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 393.5 +/- 24.5
  Background aperture counts = 156.5
  Rate = 0.02 +/- 0.001

[Wed May 22 02:40:22 2013] Updating counts from extracted products
[Wed May 22 02:40:22 2013] Set source signif. to 393.52/12.51 = 31.46
[Wed May 22 02:40:44 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 02:40:44 2013] Using photon index=1.80, rate=0.0229, arf fullrun_pn_xmm0124110101_pi300-10000_pass1_cl_src8.arf
[Wed May 22 02:40:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 02:40:44 2013] Updating source flux to 1e-13
[Wed May 22 02:41:05 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 02:41:34 2013] xmm0124110101/analysis//spectral/fullrun_pn_xmm0124110101_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete