[Tue May 21 13:52:44 2013] Detection parameters:
  Position = (279.4, 342.0) = 12 21 54.90 75 20 14.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.9 +/- 15.3
  Background counts = 24.2
  Rate = 0.006 +/- 0.001

[Tue May 21 13:52:44 2013] Off-axis axis estimate = 3.45'
[Tue May 21 13:54:56 2013] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting
[Tue May 21 13:54:56 2013] Initial guess for spatial extent in simple fitting = 8.15"
[Tue May 21 13:54:56 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.887
[Tue May 21 13:54:56 2013] Giving source the simple spatial ID 69 for pass 0, mean size = 8.15"
[Tue May 21 17:28:40 2013] fullrun_pn_xmm0124110101_pi300-10000_cl_pass0_src69.ximg exists
[Tue May 21 17:28:40 2013] fullrun_pn_xmm0124110101_pi300-10000_cl_pass0_src69_1.ximg exists
[Tue May 21 17:28:40 2013] Fit fullrun_pn_xmm0124110101_pi300-10000_cl_pass0_src69 appears to have run properly
[Tue May 21 17:28:42 2013] fullrun_pn_xmm0124110101_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Tue May 21 17:28:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0124110101_pi300-10000_cl_pass0_tfrozen_src69.csv
[Tue May 21 17:28:42 2013] fullrun_pn_xmm0124110101_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Tue May 21 17:28:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0124110101_pi300-10000_cl_pass0_tfrozen_src69.csv
[Tue May 21 17:28:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0124110101_pi300-10000_cl_pass0_tfrozen_src69_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0124110101_pi300-10000_cl_pass0_tfrozen_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:14:12 2013] Spatial fit model total counts = 728.396000, observed total counts = 670.000000
[Tue May 21 18:14:12 2013] Offset between fit and detection position for source 70 = 0.721016 pixels
[Tue May 21 18:14:12 2013] 729.352000 total counts/ 564.219000 bgd. counts: snr = 6.952004
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 0.721016 pixels
  Position = (280.0, 341.6) = 12 21 54.25 75 20 11.3
  Extent = 16.3 (16.3-32.6)" x 7.9 (5.3-10.6)", rotation angle = 74 (61-88) degrees
  Source counts = 165.1 +/- 27.0
  Background counts = 564.2
  Rate = 0.01 +/- 0.002
[Tue May 21 18:14:12 2013] Vigneting correction estimate = 1.000000
[Tue May 21 18:14:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 18:14:12 2013] Assessing source extent using major axis lower bound
[Tue May 21 18:14:12 2013] Source does appear to be extended
[Tue May 21 18:14:12 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.53
[Tue May 21 18:14:12 2013] Source is asymmetric
[Tue May 21 18:14:27 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 21 18:14:27 2013] Initial guess for spatial extent in simple fitting = 12.10"
[Tue May 21 18:14:27 2013] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.974
[Tue May 21 18:14:27 2013] Giving source the simple spatial ID 62 for pass 1, mean size = 12.10"
[Tue May 21 22:04:01 2013] fullrun_pn_xmm0124110101_pi300-10000_cl_pass1_src62.ximg exists
[Tue May 21 22:04:01 2013] fullrun_pn_xmm0124110101_pi300-10000_cl_pass1_src62_1.ximg exists
[Tue May 21 22:04:01 2013] Fit fullrun_pn_xmm0124110101_pi300-10000_cl_pass1_src62 appears to have run properly
[Tue May 21 22:04:02 2013] fullrun_pn_xmm0124110101_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Tue May 21 22:04:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0124110101_pi300-10000_cl_pass1_tfrozen_src62.csv
[Tue May 21 22:04:02 2013] fullrun_pn_xmm0124110101_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Tue May 21 22:04:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0124110101_pi300-10000_cl_pass1_tfrozen_src62.csv
[Tue May 21 22:04:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0124110101_pi300-10000_cl_pass1_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0124110101_pi300-10000_cl_pass1_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 22:33:31 2013] Spatial fit model total counts = 803.960000, observed total counts = 742.000000
[Tue May 21 22:33:31 2013] Offset between fit and detection position for source 70 = 0.467368 pixels
[Tue May 21 22:33:31 2013] 806.289000 total counts/ 567.401000 bgd. counts: snr = 10.028807
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 0.467368 pixels
  Position = (280.1, 341.1) = 12 21 54.13 75 20 9.4
  Extent = 24.2 (24.1-48.4)" x 9.2 (6.7-12.0)", rotation angle = 74 (64-85) degrees
  Source counts = 238.9 +/- 28.4
  Background counts = 567.4
  Rate = 0.01 +/- 0.002
[Tue May 21 22:33:31 2013] Vigneting correction estimate = 1.000000
[Tue May 21 22:33:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 22:33:31 2013] Assessing source extent using major axis lower bound
[Tue May 21 22:33:31 2013] Source does appear to be extended
[Tue May 21 22:33:31 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.01
[Tue May 21 22:33:31 2013] Source is asymmetric
[Tue May 21 22:33:31 2013] Source is confused with source 73
[Tue May 21 22:33:45 2013] XMMSAS src. selection expression = ellipse(24320.310600, 29627.945000, 1452.558042, 551.440816, 74.263028, X, Y)
[Tue May 21 22:33:45 2013] Writing source region out to fullrun_pn_xmm0124110101_pi300-10000_pass1_cl_src70_src.reg
[Tue May 21 22:33:45 2013] Extracting stamp from image fullrun_pn_xmm0124110101_pi300-10000_cl_sm2.00.img.gz, (197, 258) - (364, 425)
[Tue May 21 22:33:46 2013] XMMSAS bgd. selection expression = annulus(24320.310600, 29627.945000, 2420.930070, 4841.860139, X, Y) && !ellipse(25098.014980, 27841.202600, 1437.532841, 1437.532841, 0.000000, X, Y) && !ellipse(30617.548000, 30898.952000, 1520.832044, 1520.832044, 0.000000, X, Y) && !ellipse(19503.621613, 29086.410889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29347.711220, 27226.218400, 436.332013, 296.016809, 87.045743, X, Y) && !ellipse(26924.728516, 25022.232758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24589.581120, 33600.216400, 381.211211, 381.211211, 0.000000, X, Y) && !ellipse(25131.250800, 32630.223600, 465.088813, 374.424811, 339.572000, X, Y) && !ellipse(26834.964630, 26748.222168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27617.290253, 26224.987579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27920.612000, 26015.858000, 1143.888033, 521.230415, 215.462000, X, Y) && !ellipse(29483.253200, 24989.883000, 1759.640051, 421.220812, 33.898100, X, Y) && !ellipse(29682.396000, 24871.492000, 1319.712038, 456.760013, 36.282800, X, Y) && !ellipse(29547.872000, 29876.330000, 3041.664088, 3041.664088, 0.000000, X, Y) && !ellipse(23448.318115, 28463.594116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23864.660000, 28360.708000, 1265.024036, 176.092805, 8.805900, X, Y) && !ellipse(27774.914032, 27102.511932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28447.576000, 25645.330000, 1186.472034, 334.925610, 36.073100, X, Y) && !ellipse(25526.749390, 24232.220825, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 21 22:33:46 2013] Writing fullrun_pn_xmm0124110101_pi300-10000_pass1_cl_src70.gif
[Tue May 21 23:41:33 2013] Mean detx,y = (964.85, -1792.53) 
[Tue May 21 23:41:37 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 23:42:42 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 23:42:42 2013] Setting source spectrum file to fullrun_pn_xmm0124110101_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Tue May 21 23:42:42 2013] Setting bgd. spectrum file to fullrun_pn_xmm0124110101_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Wed May 22 02:40:40 2013] Updating aperture counts using extracted products
[Wed May 22 02:40:40 2013] Total counts from fullrun_pn_xmm0124110101_pi300-10000_pass1_cl_src70_src_b10.pi.gz = 1015.00
[Wed May 22 02:40:40 2013] Total counts from fullrun_pn_xmm0124110101_pi300-10000_pass1_cl_src70_bgd.pi.gz = 4039.00
[Wed May 22 02:40:40 2013] Got source and background scale factors 2250906.000000, 32956938.000000
[Wed May 22 02:40:40 2013] User source parameters:
  Position = (280.1, 341.1) = 12 21 54.13 75 20 9.4
  Extent = 24.2 (24.1-48.4)" x 9.2 (6.7-12.0)", rotation angle = 74 (64-85) degrees
  Source aperture counts = 739.1 +/- 32.9
  Background aperture counts = 275.9
  Rate = 0.04 +/- 0.002

[Wed May 22 02:40:46 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 02:40:46 2013] Using photon index=1.80, rate=0.0139, arf fullrun_pn_xmm0124110101_pi300-10000_pass1_cl_src70.arf
[Wed May 22 02:40:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 02:40:46 2013] Updating source flux to 4.3e-14
[Wed May 22 02:41:05 2013] Flag c found in src. 70 procflags, skipping spectral fitting
[Wed May 22 02:41:34 2013] xmm0124110101/analysis//spectral/fullrun_pn_xmm0124110101_pi300-10000_pass1_cl_src70_pl.csv not found, spectral fit skipped or did not complete