[Wed Jul 18 03:22:27 2012] Detection parameters:
  Position = (288.2, 276.9) = 7 39 18.10 5 13 30.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 19305.3 +/- 164.7
  Background counts = 24.6
  Rate = 0.3 +/- 0.003

[Wed Jul 18 03:22:28 2012] Off-axis axis estimate = 1.73'
[Wed Jul 18 04:36:56 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 04:36:56 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Jul 18 04:36:56 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Wed Jul 18 04:36:56 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Wed Jul 18 05:10:03 2012] fullrun_mos2_xmm0123940201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul 18 05:10:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123940201_pi300-10000_cl_pass0_src1.csv
[Wed Jul 18 05:10:03 2012] fullrun_mos2_xmm0123940201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul 18 05:10:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123940201_pi300-10000_cl_pass0_src1.csv
[Wed Jul 18 05:10:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0123940201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0123940201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 05:10:04 2012] fullrun_mos2_xmm0123940201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 18 05:10:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123940201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jul 18 05:10:04 2012] fullrun_mos2_xmm0123940201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 18 05:10:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123940201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jul 18 05:10:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0123940201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0123940201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 05:10:16 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.154989 pixels away
[Wed Jul 18 05:10:16 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 05:10:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 05:10:16 2012] Assessing source extent using major
[Wed Jul 18 05:10:16 2012] Source does appear to be extended
[Wed Jul 18 05:10:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 06:05:18 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 06:05:18 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Jul 18 06:05:18 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Wed Jul 18 06:05:18 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.29"
[Wed Jul 18 06:37:36 2012] fullrun_mos2_xmm0123940201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 18 06:37:36 2012] fullrun_mos2_xmm0123940201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 18 06:37:36 2012] Fit fullrun_mos2_xmm0123940201_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed Jul 18 06:37:36 2012] fullrun_mos2_xmm0123940201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 18 06:37:36 2012] fullrun_mos2_xmm0123940201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 18 06:37:36 2012] Fit fullrun_mos2_xmm0123940201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul 18 06:37:49 2012] Spatial fit model total counts = 17562.800000, observed total counts = 16981.000000
[Wed Jul 18 06:37:49 2012] Offset between fit and detection position for source 1 = 0.093826 pixels
[Wed Jul 18 06:37:49 2012] 17543.950000 total counts/ 4153.750000 bgd. counts: snr = 207.762368
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.093826 pixels
  Position = (288.3, 276.8) = 7 39 18.09 5 13 30.2
  Extent = 5.4 (5.3-5.4)", rotation angle = 0
  Source counts = 13390.2 +/- 132.5
  Background counts = 4153.8
  Rate = 0.2 +/- 0.002
[Wed Jul 18 06:37:49 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 06:37:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 06:37:49 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 06:37:49 2012] Source does appear to be extended
[Wed Jul 18 06:37:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 07:55:28 2012] Counts = 13390.200000, rescaling region sizes by 3.000000
[Wed Jul 18 07:55:28 2012] XMMSAS src. selection expression = ellipse(25032.207000, 24033.258000, 964.152028, 964.152028, 0.000000, X, Y)
[Wed Jul 18 07:55:28 2012] Writing source region out to fullrun_mos2_xmm0123940201_pi300-10000_pass1_cl_src1_src.reg
[Wed Jul 18 07:55:28 2012] Extracting stamp from image fullrun_mos2_xmm0123940201_pi300-10000_cl_sm2.00.img.gz, (233, 221) - (344, 332)
[Wed Jul 18 07:55:28 2012] XMMSAS bgd. selection expression = annulus(25032.207000, 24033.258000, 4820.760139, 9641.520277, X, Y) && !ellipse(14847.994553, 30767.684296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23852.596771, 15363.366272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16890.552400, 26845.375400, 508.286415, 383.688011, 0.000000, X, Y) && !ellipse(15184.234100, 22552.766113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24152.206207, 24488.016968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15905.137200, 30257.312800, 398.228011, 208.175206, 138.606145, X, Y) && !ellipse(17496.777893, 17894.202591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18267.163200, 30826.569600, 428.177612, 428.177612, 0.000000, X, Y) && !ellipse(15248.715800, 16043.854000, 369.256811, 369.256811, 0.000000, X, Y)
[Wed Jul 18 07:55:28 2012] Writing fullrun_mos2_xmm0123940201_pi300-10000_pass1_cl_src1.gif
[Wed Jul 18 07:55:35 2012] Mean detx,y = (-47.45, 29.13) 
[Wed Jul 18 07:55:36 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 07:58:11 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 07:58:11 2012] Setting source spectrum file to fullrun_mos2_xmm0123940201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 18 07:58:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0123940201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jul 18 08:18:56 2012] Updating aperture counts using extracted products
[Wed Jul 18 08:18:56 2012] Error reading totcts from fullrun_mos2_xmm0123940201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 18 08:18:56 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 08:18:56 2012] Using photon index=1.80, rate=0.228, arf fullrun_mos2_xmm0123940201_pi300-10000_pass1_cl_src1.arf
[Wed Jul 18 08:18:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 08:18:56 2012] Updating source flux to 2.7e-12
[Wed Jul 18 08:20:25 2012] Reading fit data from xmm0123940201/analysis//spectral/fullrun_mos2_xmm0123940201_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jul 18 08:20:25 2012] Spectral fit parameter nH value = 1.71015e+21
[Wed Jul 18 08:20:25 2012] Spectral fit parameter PhoIndex value = 6.47341
[Wed Jul 18 08:20:25 2012] Failed to get F(0.3-8.0) from xmm0123940201/analysis//spectral/fullrun_mos2_xmm0123940201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jul 18 08:20:25 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 08:20:25 2012] Using Nh = 1.7e+21, photon index=6.47, rate=0.228, arf fullrun_mos2_xmm0123940201_pi300-10000_pass1_cl_src1.arf
[Wed Jul 18 08:20:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 08:20:25 2012] Updating source flux to 2.3e-12