[Wed Jul 18 03:22:05 2012] Detection parameters:
  Position = (288.2, 276.8) = 7 39 18.10 5 13 30.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 17965.5 +/- 160.3
  Background counts = 21.3
  Rate = 0.3 +/- 0.003

[Wed Jul 18 03:22:06 2012] Off-axis axis estimate = 1.73'
[Wed Jul 18 03:46:25 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 03:46:25 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Jul 18 03:46:25 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Wed Jul 18 03:46:25 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Wed Jul 18 04:36:55 2012] fullrun_mos1_xmm0123940201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul 18 04:36:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0123940201_pi300-10000_cl_pass0_src1.csv
[Wed Jul 18 04:36:55 2012] fullrun_mos1_xmm0123940201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul 18 04:36:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0123940201_pi300-10000_cl_pass0_src1.csv
[Wed Jul 18 04:36:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0123940201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0123940201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 04:36:55 2012] fullrun_mos1_xmm0123940201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 18 04:36:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0123940201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jul 18 04:36:55 2012] fullrun_mos1_xmm0123940201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 18 04:36:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0123940201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jul 18 04:36:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0123940201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0123940201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 05:10:13 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.241254 pixels away
[Wed Jul 18 05:10:13 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 05:10:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 05:10:13 2012] Assessing source extent using major
[Wed Jul 18 05:10:13 2012] Source does appear to be extended
[Wed Jul 18 05:10:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 05:14:15 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 05:14:15 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Jul 18 05:14:15 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Wed Jul 18 05:14:15 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.29"
[Wed Jul 18 06:05:17 2012] fullrun_mos1_xmm0123940201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 18 06:05:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0123940201_pi300-10000_cl_pass1_src1.csv
[Wed Jul 18 06:05:17 2012] fullrun_mos1_xmm0123940201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 18 06:05:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0123940201_pi300-10000_cl_pass1_src1.csv
[Wed Jul 18 06:05:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0123940201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0123940201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 06:05:18 2012] fullrun_mos1_xmm0123940201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 18 06:05:18 2012] fullrun_mos1_xmm0123940201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 18 06:05:18 2012] Fit fullrun_mos1_xmm0123940201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul 18 06:37:45 2012] Spatial fit model total counts = 15976.700000, observed total counts = 15979.000000
[Wed Jul 18 06:37:45 2012] Offset between fit and detection position for source 1 = 0.115949 pixels
[Wed Jul 18 06:37:45 2012] 15990.920000 total counts/ 3578.620000 bgd. counts: snr = 207.488710
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.115949 pixels
  Position = (288.2, 276.7) = 7 39 18.10 5 13 29.9
  Extent = 5.7 (5.6-5.8)", rotation angle = 0
  Source counts = 12412.3 +/- 126.5
  Background counts = 3578.6
  Rate = 0.2 +/- 0.002
[Wed Jul 18 06:37:45 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 06:37:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 06:37:45 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 06:37:45 2012] Source does appear to be extended
[Wed Jul 18 06:37:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 07:11:55 2012] Counts = 12412.300000, rescaling region sizes by 3.000000
[Wed Jul 18 07:11:55 2012] XMMSAS src. selection expression = ellipse(25027.664600, 24027.223400, 1030.190430, 1030.190430, 0.000000, X, Y)
[Wed Jul 18 07:11:55 2012] Writing source region out to fullrun_mos1_xmm0123940201_pi300-10000_pass1_cl_src1_src.reg
[Wed Jul 18 07:11:55 2012] Extracting stamp from image fullrun_mos1_xmm0123940201_pi300-10000_cl_sm2.00.img.gz, (229, 218) - (347, 336)
[Wed Jul 18 07:11:55 2012] XMMSAS bgd. selection expression = annulus(25027.664600, 24027.223400, 5150.952148, 10301.904296, X, Y) && !ellipse(14859.997400, 30761.393000, 489.742414, 489.742414, 0.000000, X, Y) && !ellipse(23845.611752, 15360.669328, 545.075646, 396.985157, 4.019226, X, Y) && !ellipse(27405.215200, 28222.948800, 469.744014, 292.595208, 4.898470, X, Y) && !ellipse(16982.516067, 26864.104342, 507.824015, 419.460981, 90.000000, X, Y) && !ellipse(29427.963800, 21114.560800, 272.696633, 272.696633, 0.000000, X, Y) && !ellipse(18760.061580, 28954.959200, 419.192812, 419.192812, 0.000000, X, Y) && !ellipse(15203.163132, 22564.196014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17514.897000, 17882.567800, 387.095211, 387.095211, 0.000000, X, Y) && !ellipse(18231.164040, 30698.161600, 249.859207, 249.859207, 0.000000, X, Y) && !ellipse(27311.335297, 31122.143982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29926.589000, 25815.218600, 437.717613, 437.717613, 0.000000, X, Y) && !ellipse(27526.397640, 26492.984800, 293.436008, 293.436008, 0.000000, X, Y) && !ellipse(22264.193200, 28195.925800, 312.896009, 312.896009, 0.000000, X, Y) && !ellipse(24144.049957, 24399.307129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17106.410080, 24265.671600, 342.696010, 342.696010, 0.000000, X, Y) && !ellipse(23581.462524, 23254.739929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30373.457581, 28654.705780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15908.289000, 30248.117600, 385.792811, 385.792811, 0.000000, X, Y) && !ellipse(26552.478600, 29342.731760, 611.932818, 611.932818, 0.000000, X, Y) && !ellipse(15082.784220, 16075.601418, 1321.888240, 388.668603, 15.332445, X, Y) && !ellipse(20601.817398, 16232.936157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32975.484528, 17849.809174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35049.391632, 32015.051575, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 07:11:55 2012] Writing fullrun_mos1_xmm0123940201_pi300-10000_pass1_cl_src1.gif
[Wed Jul 18 07:12:02 2012] Mean detx,y = (253.12, -101.47) 
[Wed Jul 18 07:12:04 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 07:15:20 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 07:15:20 2012] Setting source spectrum file to fullrun_mos1_xmm0123940201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 18 07:15:20 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0123940201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jul 18 08:18:54 2012] Updating aperture counts using extracted products
[Wed Jul 18 08:18:54 2012] Error reading totcts from fullrun_mos1_xmm0123940201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 18 08:18:55 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 08:18:55 2012] Using photon index=1.80, rate=0.212, arf fullrun_mos1_xmm0123940201_pi300-10000_pass1_cl_src1.arf
[Wed Jul 18 08:18:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 08:18:55 2012] Updating source flux to 2.3e-12
[Wed Jul 18 08:19:46 2012] Reading fit data from xmm0123940201/analysis//spectral/fullrun_mos1_xmm0123940201_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jul 18 08:19:46 2012] Spectral fit parameter nH value = 1.41111e+21
[Wed Jul 18 08:19:46 2012] Spectral fit parameter PhoIndex value = 6.13741
[Wed Jul 18 08:19:46 2012] Failed to get F(0.3-8.0) from xmm0123940201/analysis//spectral/fullrun_mos1_xmm0123940201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jul 18 08:19:46 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 08:19:46 2012] Using Nh = 1.4e+21, photon index=6.14, rate=0.212, arf fullrun_mos1_xmm0123940201_pi300-10000_pass1_cl_src1.arf
[Wed Jul 18 08:19:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 08:19:46 2012] Updating source flux to 2e-12