[Sat Jun 1 04:20:27 2013] Detection parameters: Position = (319.7, 286.7) = 23 13 41.79 -42 43 48.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 136.7 +/- 27.3 Background counts = 322.2 Rate = 0.003 +/- 0.0006 [Sat Jun 1 04:20:29 2013] Off-axis axis estimate = 1.76' [Sat Jun 1 04:28:32 2013] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting [Sat Jun 1 04:28:32 2013] Initial guess for spatial extent in simple fitting = 7.31" [Sat Jun 1 04:28:32 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841 [Sat Jun 1 04:28:32 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 7.31" [Sat Jun 1 09:45:01 2013] fullrun_pn_xmm0123900101_pi300-10000_cl_pass0_src31.ximg exists [Sat Jun 1 09:45:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0123900101_pi300-10000_cl_pass0_src31.csv [Sat Jun 1 09:45:01 2013] fullrun_pn_xmm0123900101_pi300-10000_cl_pass0_src31_1.ximg exists [Sat Jun 1 09:45:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0123900101_pi300-10000_cl_pass0_src31.csv [Sat Jun 1 09:45:01 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0123900101_pi300-10000_cl_pass0_src31_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0123900101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 09:45:02 2013] fullrun_pn_xmm0123900101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists [Sat Jun 1 09:45:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0123900101_pi300-10000_cl_pass0_tfrozen_src31.csv [Sat Jun 1 09:45:02 2013] fullrun_pn_xmm0123900101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists [Sat Jun 1 09:45:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0123900101_pi300-10000_cl_pass0_tfrozen_src31.csv [Sat Jun 1 09:45:02 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0123900101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0123900101_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 13:45:53 2013] Source 33 is offset by -4.993144 and 6.153303 pixels which is larger than 2 X fitted extent = 6.721334 x 1.520915, not incorporating fit results [Sat Jun 1 13:45:53 2013] Vigneting correction estimate = 1.000000 [Sat Jun 1 13:45:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 1 13:45:53 2013] Assessing source extent using major [Sat Jun 1 13:45:53 2013] Source does appear to be extended [Sat Jun 1 13:45:53 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 1 13:46:36 2013] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting [Sat Jun 1 13:46:36 2013] Initial guess for spatial extent in simple fitting = 7.31" [Sat Jun 1 13:46:36 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841 [Sat Jun 1 13:46:36 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 7.31" [Sat Jun 1 16:16:35 2013] fullrun_pn_xmm0123900101_pi300-10000_cl_pass1_src24.ximg exists [Sat Jun 1 16:16:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0123900101_pi300-10000_cl_pass1_src24.csv [Sat Jun 1 16:16:35 2013] fullrun_pn_xmm0123900101_pi300-10000_cl_pass1_src24_1.ximg exists [Sat Jun 1 16:16:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0123900101_pi300-10000_cl_pass1_src24.csv [Sat Jun 1 16:16:35 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0123900101_pi300-10000_cl_pass1_src24_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0123900101_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 16:16:36 2013] fullrun_pn_xmm0123900101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists [Sat Jun 1 16:16:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0123900101_pi300-10000_cl_pass1_tfrozen_src24.csv [Sat Jun 1 16:16:36 2013] fullrun_pn_xmm0123900101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists [Sat Jun 1 16:16:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0123900101_pi300-10000_cl_pass1_tfrozen_src24.csv [Sat Jun 1 16:16:36 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0123900101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0123900101_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 19:12:23 2013] Source 33 is offset by -5.094041 and 4.962338 pixels which is larger than 2 X fitted extent = 1.570699 x 6.721334, not incorporating fit results [Sat Jun 1 19:12:23 2013] Vigneting correction estimate = 1.000000 [Sat Jun 1 19:12:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 1 19:12:23 2013] Assessing source extent using major [Sat Jun 1 19:12:23 2013] Source does appear to be extended [Sat Jun 1 19:12:23 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 1 19:12:59 2013] XMMSAS src. selection expression = ellipse(27766.152435, 24893.567383, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 1 19:12:59 2013] Writing source region out to fullrun_pn_xmm0123900101_pi300-10000_pass1_cl_src33_src.reg [Sat Jun 1 19:12:59 2013] Extracting stamp from image fullrun_pn_xmm0123900101_pi300-10000_cl_sm2.00.img.gz, (282, 249) - (357, 324) [Sat Jun 1 19:12:59 2013] XMMSAS bgd. selection expression = annulus(27766.152435, 24893.567383, 1087.500000, 2175.000000, X, Y) && !ellipse(24043.443000, 25178.757600, 6289.152181, 5036.184145, 36.105700, X, Y) && !ellipse(24896.482605, 22215.067627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26132.281921, 26568.694397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27060.886383, 25142.585236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26747.630096, 23793.867523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26444.152283, 24196.279694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27615.763611, 23985.942963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25999.480011, 23353.252136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25823.868408, 22523.433350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25575.822296, 22058.010696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26004.414000, 21666.931200, 1316.160038, 503.408814, 26.644300, X, Y) [Sat Jun 1 19:12:59 2013] Writing fullrun_pn_xmm0123900101_pi300-10000_pass1_cl_src33.gif [Sat Jun 1 19:42:24 2013] Mean detx,y = (-3093.11, 1609.30) [Sat Jun 1 19:42:28 2013] Setting backscal keywords in source and bgd. spectrum [Sat Jun 1 19:42:47 2013] Binned source spectrum to 10 counts/bin [Sat Jun 1 19:42:48 2013] Setting source spectrum file to fullrun_pn_xmm0123900101_pi300-10000_pass1_cl_src33_src_b10.pi.gz [Sat Jun 1 19:42:48 2013] Setting bgd. spectrum file to fullrun_pn_xmm0123900101_pi300-10000_pass1_cl_src33_bgd.pi.gz [Sat Jun 1 21:03:43 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat Jun 1 21:03:43 2013] rmf not generated due to insufficient counts [Sun Jun 2 00:27:28 2013] Updating aperture counts using extracted products [Sun Jun 2 00:27:28 2013] Total counts from fullrun_pn_xmm0123900101_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 1742.00 [Sun Jun 2 00:27:28 2013] Total counts from fullrun_pn_xmm0123900101_pi300-10000_pass1_cl_src33_bgd.pi.gz = 330.00 [Sun Jun 2 00:27:29 2013] Got source and background scale factors 1243762.000000, 593600.000000 [Sun Jun 2 00:27:29 2013] User source parameters: Position = (319.7, 286.7) = 23 13 41.79 -42 43 48.7 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 1050.6 +/- 42.7 Background aperture counts = 691.4 Rate = 0.03 +/- 0.001 [Sun Jun 2 00:27:29 2013] Updating counts from extracted products [Sun Jun 2 00:27:29 2013] Set source signif. to 1050.56/26.30 = 39.95 [Sun Jun 2 00:27:36 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 2 00:27:36 2013] Using photon index=1.80, rate=0.0312, arf fullrun_pn_xmm0123900101_pi300-10000_pass1_cl_src33.arf [Sun Jun 2 00:27:36 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 2 00:27:36 2013] Updating source flux to 9.9e-14 [Sun Jun 2 00:28:20 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 2 00:28:29 2013] xmm0123900101/analysis//spectral/fullrun_pn_xmm0123900101_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete