[Thu Jul 26 10:47:03 2012] Detection parameters:
  Position = (289.6, 271.7) = 5 28 51.21 -65 27 16.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1816.5 +/- 78.5
  Background counts = 53.5
  Rate = 0.03 +/- 0.001

[Thu Jul 26 10:47:05 2012] Off-axis axis estimate = 2.04'
[Thu Jul 26 14:10:19 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 14:10:19 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Thu Jul 26 14:10:19 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.022
[Thu Jul 26 14:10:19 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.45"
[Thu Jul 26 16:22:16 2012] fullrun_mos2_xmm0123720301_pi300-10000_cl_pass0_src2.ximg exists
[Thu Jul 26 16:22:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123720301_pi300-10000_cl_pass0_src2.csv
[Thu Jul 26 16:22:16 2012] fullrun_mos2_xmm0123720301_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Jul 26 16:22:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123720301_pi300-10000_cl_pass0_src2.csv
[Thu Jul 26 16:22:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0123720301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0123720301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 16:22:17 2012] fullrun_mos2_xmm0123720301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Jul 26 16:22:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123720301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Jul 26 16:22:17 2012] fullrun_mos2_xmm0123720301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Jul 26 16:22:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123720301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Jul 26 16:22:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0123720301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0123720301_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 16:22:46 2012] Source 2 is offset by -6.212362 and -4.621248 pixels which is larger than
2 X fitted extent = 1.884961 x 1.884961, not incorporating fit results
[Thu Jul 26 16:22:47 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 16:22:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 16:22:47 2012] Assessing source extent using major
[Thu Jul 26 16:22:47 2012] Source does appear to be extended
[Thu Jul 26 16:22:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 18:09:48 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 18:09:48 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Thu Jul 26 18:09:48 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.022
[Thu Jul 26 18:09:48 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.45"
[Thu Jul 26 19:22:13 2012] fullrun_mos2_xmm0123720301_pi300-10000_cl_pass1_src2.ximg exists
[Thu Jul 26 19:22:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123720301_pi300-10000_cl_pass1_src2.csv
[Thu Jul 26 19:22:13 2012] fullrun_mos2_xmm0123720301_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Jul 26 19:22:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123720301_pi300-10000_cl_pass1_src2.csv
[Thu Jul 26 19:22:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0123720301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0123720301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 19:22:13 2012] fullrun_mos2_xmm0123720301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Jul 26 19:22:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123720301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Jul 26 19:22:13 2012] fullrun_mos2_xmm0123720301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Jul 26 19:22:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123720301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Jul 26 19:22:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0123720301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0123720301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 19:22:23 2012] Spatial fit model total counts = 63999.200000, observed total counts = 47279.000000
[Thu Jul 26 19:22:23 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 26 19:22:23 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 19:22:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 19:22:23 2012] Assessing source extent using major
[Thu Jul 26 19:22:23 2012] Source does appear to be extended
[Thu Jul 26 19:22:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 00:27:20 2012] Counts = 1816.487915, rescaling region sizes by 2.000000
[Fri Jul 27 00:27:20 2012] XMMSAS src. selection expression = ellipse(25149.902496, 23590.537415, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jul 27 00:27:20 2012] Writing source region out to fullrun_mos2_xmm0123720301_pi300-10000_pass1_cl_src2_src.reg
[Fri Jul 27 00:27:20 2012] Extracting stamp from image fullrun_mos2_xmm0123720301_pi300-10000_cl_sm2.00.img.gz, (215, 197) - (365, 347)
[Fri Jul 27 00:27:20 2012] XMMSAS bgd. selection expression = annulus(25149.902496, 23590.537415, 4350.000000, 8700.000000, X, Y) && !ellipse(25922.035400, 23998.051800, 2059.152059, 2059.152059, 0.000000, X, Y) && !ellipse(18810.557800, 23058.651200, 348.444010, 348.444010, 0.000000, X, Y) && !ellipse(21099.509460, 17157.461400, 560.260016, 440.606413, 26.727392, X, Y) && !ellipse(26141.696655, 22616.494781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21123.385600, 31617.174600, 494.909614, 494.909614, 0.000000, X, Y) && !ellipse(30095.422913, 31966.520294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30907.840637, 32083.145111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29206.700525, 15852.115819, 561.390007, 208.729254, 329.098226, X, Y) && !ellipse(21893.909140, 30402.958200, 472.769614, 472.769614, 0.000000, X, Y) && !ellipse(20625.031800, 24569.502400, 294.595208, 294.595208, 0.000000, X, Y) && !ellipse(28286.414000, 25407.634000, 1163.832033, 1163.832033, 0.000000, X, Y) && !ellipse(29648.475281, 19703.412567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28272.639099, 24406.696075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28783.623383, 20578.307114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30374.366000, 19067.214000, 1511.736043, 1511.736043, 0.000000, X, Y) && !ellipse(22982.660492, 27444.522186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23820.399231, 26478.842896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23301.152000, 27030.846000, 1249.072036, 1249.072036, 0.000000, X, Y) && !ellipse(22689.352000, 27842.600000, 1249.072036, 861.272025, 240.865000, X, Y) && !ellipse(28349.258000, 21159.958000, 1351.480039, 531.208015, 222.305000, X, Y) && !ellipse(22070.189800, 28483.626720, 1658.592048, 318.085609, 38.113000, X, Y)
[Fri Jul 27 00:27:20 2012] Writing fullrun_mos2_xmm0123720301_pi300-10000_pass1_cl_src2.gif
[Fri Jul 27 00:34:22 2012] Mean detx,y = (-122.33, -193.09) 
[Fri Jul 27 00:34:26 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 00:38:09 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 00:38:09 2012] Setting source spectrum file to fullrun_mos2_xmm0123720301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 27 00:38:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0123720301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jul 27 00:53:34 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul 27 00:53:34 2012] rmf not generated due to insufficient counts
[Fri Jul 27 01:41:40 2012] Updating aperture counts using extracted products
[Fri Jul 27 01:41:40 2012] Error reading totcts from fullrun_mos2_xmm0123720301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 27 01:41:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 01:41:40 2012] Using photon index=1.80, rate=0.0347, arf fullrun_mos2_xmm0123720301_pi300-10000_pass1_cl_src2.arf
[Fri Jul 27 01:41:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 01:41:40 2012] Updating source flux to 3.2e-13
[Fri Jul 27 01:43:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting