[Thu Jul 26 10:46:29 2012] Detection parameters:
  Position = (350.5, 322.0) = 5 28 8.81 -65 23 36.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.8 +/- 12.2
  Background counts = 28.4
  Rate = 0.002 +/- 0.0003

[Thu Jul 26 10:46:29 2012] Off-axis axis estimate = 4.14'
[Thu Jul 26 11:50:59 2012] Using EEF radius (= 8.50 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 11:50:59 2012] Initial guess for spatial extent in simple fitting = 8.50"
[Thu Jul 26 11:50:59 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.830
[Thu Jul 26 11:50:59 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 8.50"
[Thu Jul 26 14:10:18 2012] fullrun_mos1_xmm0123720301_pi300-10000_cl_pass0_src26.ximg exists
[Thu Jul 26 14:10:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0123720301_pi300-10000_cl_pass0_src26.csv
[Thu Jul 26 14:10:18 2012] fullrun_mos1_xmm0123720301_pi300-10000_cl_pass0_src26_1.ximg exists
[Thu Jul 26 14:10:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0123720301_pi300-10000_cl_pass0_src26.csv
[Thu Jul 26 14:10:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0123720301_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0123720301_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 14:10:18 2012] fullrun_mos1_xmm0123720301_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Thu Jul 26 14:10:18 2012] fullrun_mos1_xmm0123720301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Thu Jul 26 14:10:18 2012] Fit fullrun_mos1_xmm0123720301_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Thu Jul 26 16:22:32 2012] Spatial fit model total counts = 395.109000, observed total counts = 374.000000
[Thu Jul 26 16:22:32 2012] Offset between fit and detection position for source 18 = 3.589061 pixels
[Thu Jul 26 16:22:32 2012] 327.091000 total counts/ 108.752000 bgd. counts: snr = 20.936915
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 3.589061 pixels
  Position = (352.7, 324.9) = 5 28 7.32 -65 23 23.3
  Extent = 16.9 (16.6-17.0)", rotation angle = 0
  Source counts = 218.3 +/- 18.1
  Background counts = 108.8
  Rate = 0.004 +/- 0.0003
[Thu Jul 26 16:22:32 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 16:22:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 16:22:32 2012] Assessing source extent using major axis lower bound
[Thu Jul 26 16:22:32 2012] Source does appear to be extended
[Thu Jul 26 16:22:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 17:34:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 26 17:34:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 26 17:34:13 2012] Initial guess for spatial extent in simple fitting = 16.88"
[Thu Jul 26 17:34:13 2012] source mask rpix=3.9, npix_max = 76, mask sum = 59, frac = 0.769
[Thu Jul 26 17:34:13 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 16.88"
[Thu Jul 26 18:09:48 2012] fullrun_mos1_xmm0123720301_pi300-10000_cl_pass1_src18.ximg exists
[Thu Jul 26 18:09:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0123720301_pi300-10000_cl_pass1_src18.csv
[Thu Jul 26 18:09:48 2012] fullrun_mos1_xmm0123720301_pi300-10000_cl_pass1_src18_1.ximg exists
[Thu Jul 26 18:09:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0123720301_pi300-10000_cl_pass1_src18.csv
[Thu Jul 26 18:09:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0123720301_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0123720301_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 18:09:48 2012] fullrun_mos1_xmm0123720301_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Thu Jul 26 18:09:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0123720301_pi300-10000_cl_pass1_tfrozen_src18.csv
[Thu Jul 26 18:09:48 2012] fullrun_mos1_xmm0123720301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Thu Jul 26 18:09:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0123720301_pi300-10000_cl_pass1_tfrozen_src18.csv
[Thu Jul 26 18:09:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0123720301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0123720301_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 19:22:18 2012] Warning, spatial fit 18 centroid is now closest to src. 19
[Thu Jul 26 19:22:18 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 19:22:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 19:22:18 2012] Assessing source extent using major axis lower bound
[Thu Jul 26 19:22:18 2012] Source does appear to be extended
[Thu Jul 26 19:22:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 19:22:18 2012] Source is confused with source 20
[Thu Jul 26 23:23:25 2012] XMMSAS src. selection expression = ellipse(30632.202000, 28215.193800, 1012.866029, 1012.866029, 0.000000, X, Y)
[Thu Jul 26 23:23:25 2012] Writing source region out to fullrun_mos1_xmm0123720301_pi300-10000_pass1_cl_src18_src.reg
[Thu Jul 26 23:23:25 2012] Extracting stamp from image fullrun_mos1_xmm0123720301_pi300-10000_cl_sm2.00.img.gz, (294, 267) - (411, 383)
[Thu Jul 26 23:23:25 2012] XMMSAS bgd. selection expression = annulus(30632.202000, 28215.193800, 1688.110049, 3376.220097, X, Y) && !ellipse(25925.706200, 23990.540200, 2091.768752, 2091.768752, 0.000000, X, Y) && !ellipse(30096.189200, 31976.528600, 562.600016, 562.600016, 0.000000, X, Y) && !ellipse(30907.466738, 32083.252874, 596.064590, 376.376037, 28.418758, X, Y) && !ellipse(27681.504791, 23438.677704, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(29470.378000, 27066.470000, 2533.680073, 550.755216, 318.785000, X, Y) && !ellipse(29731.322000, 27335.572000, 1266.840036, 1266.840036, 0.000000, X, Y)
[Thu Jul 26 23:23:25 2012] Writing fullrun_mos1_xmm0123720301_pi300-10000_pass1_cl_src18.gif
[Thu Jul 26 23:35:50 2012] Mean detx,y = (-27.43, -6250.30) 
[Thu Jul 26 23:35:52 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 23:36:33 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 23:36:33 2012] Setting source spectrum file to fullrun_mos1_xmm0123720301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Jul 26 23:36:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0123720301_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Fri Jul 27 01:41:39 2012] Updating aperture counts using extracted products
[Fri Jul 27 01:41:39 2012] Error reading totcts from fullrun_mos1_xmm0123720301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Jul 27 01:41:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 01:41:40 2012] Using photon index=1.80, rate=0.0039, arf fullrun_mos1_xmm0123720301_pi300-10000_pass1_cl_src18.arf
[Fri Jul 27 01:41:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 01:41:40 2012] Updating source flux to 7.9e-14
[Fri Jul 27 01:41:42 2012] Flag c found in src. 18 procflags, skipping spectral fitting