[Fri Jun 22 10:41:27 2012] Detection parameters:
  Position = (462.9, 255.0) = 7 33 44.01 31 47 20.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 356.7 +/- 23.7
  Background counts = 20.6
  Rate = 0.006 +/- 0.0004

[Fri Jun 22 10:41:29 2012] Off-axis axis estimate = 12.33'
[Fri Jun 22 12:12:17 2012] Using EEF radius (= 12.60 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 12:12:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 22 12:12:17 2012] Initial guess for spatial extent in simple fitting = 12.60"
[Fri Jun 22 12:12:17 2012] source mask rpix=2.9, npix_max = 46, mask sum = 36, frac = 0.781
[Fri Jun 22 12:12:17 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 12.60"
[Fri Jun 22 14:44:19 2012] fullrun_mos2_xmm0123710101_pi300-10000_cl_pass0_src6.ximg exists
[Fri Jun 22 14:44:19 2012] fullrun_mos2_xmm0123710101_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Jun 22 14:44:19 2012] Fit fullrun_mos2_xmm0123710101_pi300-10000_cl_pass0_src6 appears to have run properly
[Fri Jun 22 14:44:20 2012] fullrun_mos2_xmm0123710101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Jun 22 14:44:20 2012] fullrun_mos2_xmm0123710101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Jun 22 14:44:20 2012] Fit fullrun_mos2_xmm0123710101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Jun 22 14:44:41 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 17.054280 pixels away
[Fri Jun 22 14:44:41 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 14:44:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 14:44:41 2012] Assessing source extent using major
[Fri Jun 22 14:44:41 2012] Source does appear to be extended
[Fri Jun 22 14:44:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 15:44:04 2012] Using EEF radius (= 12.60 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 15:44:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 22 15:44:04 2012] Initial guess for spatial extent in simple fitting = 12.60"
[Fri Jun 22 15:44:04 2012] source mask rpix=2.9, npix_max = 46, mask sum = 36, frac = 0.781
[Fri Jun 22 15:44:04 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 12.60"
[Fri Jun 22 17:03:53 2012] fullrun_mos2_xmm0123710101_pi300-10000_cl_pass1_src6.ximg exists
[Fri Jun 22 17:03:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123710101_pi300-10000_cl_pass1_src6.csv
[Fri Jun 22 17:03:53 2012] fullrun_mos2_xmm0123710101_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Jun 22 17:03:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123710101_pi300-10000_cl_pass1_src6.csv
[Fri Jun 22 17:03:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0123710101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0123710101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 17:03:53 2012] fullrun_mos2_xmm0123710101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Jun 22 17:03:53 2012] fullrun_mos2_xmm0123710101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Jun 22 17:03:53 2012] Fit fullrun_mos2_xmm0123710101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Jun 22 17:04:06 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.705687 pixels away
[Fri Jun 22 17:04:06 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 17:04:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 17:04:06 2012] Assessing source extent using major
[Fri Jun 22 17:04:06 2012] Source does appear to be extended
[Fri Jun 22 17:04:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 19:35:43 2012] XMMSAS src. selection expression = ellipse(40225.063263, 22133.098907, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 22 19:35:43 2012] Writing source region out to fullrun_mos2_xmm0123710101_pi300-10000_pass1_cl_src4_src.reg
[Fri Jun 22 19:35:43 2012] Extracting stamp from image fullrun_mos2_xmm0123710101_pi300-10000_cl_sm2.00.img.gz, (425, 217) - (500, 292)
[Fri Jun 22 19:35:43 2012] XMMSAS bgd. selection expression = annulus(40225.063263, 22133.098907, 1087.500000, 2175.000000, X, Y)
[Fri Jun 22 19:35:43 2012] Writing fullrun_mos2_xmm0123710101_pi300-10000_pass1_cl_src4.gif
[Fri Jun 22 19:43:48 2012] Mean detx,y = (-11365.43, -9434.79) 
[Fri Jun 22 19:43:49 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 19:44:01 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 19:44:01 2012] Setting source spectrum file to fullrun_mos2_xmm0123710101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun 22 19:44:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0123710101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jun 22 19:59:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 22 19:59:54 2012] rmf not generated due to insufficient counts
[Fri Jun 22 20:05:59 2012] Updating aperture counts using extracted products
[Fri Jun 22 20:05:59 2012] Error reading totcts from fullrun_mos2_xmm0123710101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun 22 20:06:00 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 20:06:00 2012] Using photon index=1.80, rate=0.00585, arf fullrun_mos2_xmm0123710101_pi300-10000_pass1_cl_src4.arf
[Fri Jun 22 20:06:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 20:06:00 2012] Updating source flux to 1.5e-13
[Fri Jun 22 20:07:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting