[Thu Jun  7 23:07:59 2012] Detection parameters:
  Position = (407.8, 480.6) = 7 47 9.92 -67 33 17.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.9 +/- 11.2
  Background counts = 19.5
  Rate = 0.003 +/- 0.0006

[Thu Jun  7 23:08:01 2012] Off-axis axis estimate = 15.40'
[Thu Jun  7 23:10:30 2012] Using EEF radius (= 14.13 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 23:10:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun  7 23:10:30 2012] Initial guess for spatial extent in simple fitting = 14.13"
[Thu Jun  7 23:10:30 2012] source mask rpix=3.2, npix_max = 56, mask sum = 56, frac = 0.996
[Thu Jun  7 23:10:30 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 14.13"
[Fri Jun  8 01:23:27 2012] fullrun_pn_xmm0123500101_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jun  8 01:23:27 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0123500101_pi300-10000_cl_pass0_src2.csv
[Fri Jun  8 01:23:27 2012] fullrun_pn_xmm0123500101_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jun  8 01:23:27 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0123500101_pi300-10000_cl_pass0_src2.csv
[Fri Jun  8 01:23:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0123500101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0123500101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 01:23:28 2012] fullrun_pn_xmm0123500101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jun  8 01:23:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0123500101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun  8 01:23:28 2012] fullrun_pn_xmm0123500101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jun  8 01:23:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0123500101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun  8 01:23:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0123500101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0123500101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 03:02:28 2012] Spatial fit model total counts = 302.518000, observed total counts = 274.000000
[Fri Jun  8 03:02:28 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  8 03:02:29 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 03:02:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 03:02:29 2012] Assessing source extent using major
[Fri Jun  8 03:02:29 2012] Source does appear to be extended
[Fri Jun  8 03:02:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 03:02:29 2012] Deleting source due to low Poisson probability 0.8