[Thu Jun  7 23:08:16 2012] Detection parameters:
  Position = (412.8, 371.8) = 7 47 5.60 -67 41 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 19.4 +/- 5.8
  Background counts = 1.7
  Rate = 0.01 +/- 0.003

[Thu Jun  7 23:08:16 2012] Off-axis axis estimate = 9.85'
[Fri Jun  8 01:23:29 2012] Using EEF radius (= 11.35 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 01:23:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  8 01:23:29 2012] Initial guess for spatial extent in simple fitting = 11.35"
[Fri Jun  8 01:23:29 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.930
[Fri Jun  8 01:23:29 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 11.35"
[Fri Jun  8 01:29:42 2012] fullrun_mos1_xmm0123500101_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jun  8 01:29:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0123500101_pi300-10000_cl_pass0_src4.csv
[Fri Jun  8 01:29:42 2012] fullrun_mos1_xmm0123500101_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jun  8 01:29:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0123500101_pi300-10000_cl_pass0_src4.csv
[Fri Jun  8 01:29:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0123500101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0123500101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 01:29:42 2012] fullrun_mos1_xmm0123500101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jun  8 01:29:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0123500101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jun  8 01:29:42 2012] fullrun_mos1_xmm0123500101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jun  8 01:29:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0123500101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jun  8 01:29:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0123500101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0123500101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 03:02:30 2012] Spatial fit model total counts = 22.847900, observed total counts = 27.000000
[Fri Jun  8 03:02:30 2012] Offset between fit and detection position for source 5 = 0.879568 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.879568 pixels
  Position = (413.6, 372.2) = 7 47 5.00 -67 41 10.7
  Extent = 7.7 (6.1-9.2)", rotation angle = 0
  Source counts = 19.8 +/- 4.4
  Background counts = 0.0
  Rate = 0.007 +/- 0.002
 Deleting source due to low signal-to-noise ratio