[Thu Jun  7 23:08:16 2012] Detection parameters:
  Position = (415.1, 323.7) = 7 47 3.65 -67 44 41.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21.3 +/- 5.7
  Background counts = 1.9
  Rate = 0.01 +/- 0.003

[Thu Jun  7 23:08:16 2012] Off-axis axis estimate = 8.65'
[Fri Jun  8 01:23:29 2012] Using EEF radius (= 10.75 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 01:23:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  8 01:23:29 2012] Initial guess for spatial extent in simple fitting = 10.75"
[Fri Jun  8 01:23:29 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.019
[Fri Jun  8 01:23:29 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.75"
[Fri Jun  8 01:29:41 2012] fullrun_mos1_xmm0123500101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun  8 01:29:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0123500101_pi300-10000_cl_pass0_src3.csv
[Fri Jun  8 01:29:42 2012] fullrun_mos1_xmm0123500101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun  8 01:29:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0123500101_pi300-10000_cl_pass0_src3.csv
[Fri Jun  8 01:29:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0123500101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0123500101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 01:29:42 2012] fullrun_mos1_xmm0123500101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun  8 01:29:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0123500101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun  8 01:29:42 2012] fullrun_mos1_xmm0123500101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun  8 01:29:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0123500101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun  8 01:29:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0123500101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0123500101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 03:02:30 2012] Spatial fit model total counts = 26.760200, observed total counts = 29.000000
[Fri Jun  8 03:02:30 2012] Offset between fit and detection position for source 4 = 0.161566 pixels
[Fri Jun  8 03:02:30 2012] 25.807100 total counts/ 11.803400 bgd. counts: snr = 4.076047
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.161566 pixels
  Position = (414.9, 323.7) = 7 47 3.78 -67 44 41.5
  Extent = 3.3 (2.7-4.3)", rotation angle = 0
  Source counts = 14.0 +/- 5.1
  Background counts = 11.8
  Rate = 0.005 +/- 0.002
[Fri Jun  8 03:02:30 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 03:02:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 03:02:30 2012] Assessing source extent using major axis lower bound
[Fri Jun  8 03:02:30 2012] Source does appear to be extended
[Fri Jun  8 03:02:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 04:58:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  8 04:58:00 2012] Initial guess for spatial extent in simple fitting = 3.27"
[Fri Jun  8 04:58:00 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.957
[Fri Jun  8 04:58:00 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 3.27"
[Fri Jun  8 05:01:35 2012] fullrun_mos1_xmm0123500101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun  8 05:01:35 2012] fullrun_mos1_xmm0123500101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun  8 05:01:35 2012] Fit fullrun_mos1_xmm0123500101_pi300-10000_cl_pass1_src3 appears to have run properly
[Fri Jun  8 05:01:35 2012] fullrun_mos1_xmm0123500101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun  8 05:01:35 2012] fullrun_mos1_xmm0123500101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun  8 05:01:35 2012] Fit fullrun_mos1_xmm0123500101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jun  8 05:42:25 2012] Spatial fit model total counts = 28.659200, observed total counts = 28.000000
[Fri Jun  8 05:42:25 2012] Offset between fit and detection position for source 4 = 0.048480 pixels
[Fri Jun  8 05:42:25 2012] 28.835700 total counts/ 15.317900 bgd. counts: snr = 3.453873
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.048480 pixels
  Position = (414.9, 323.7) = 7 47 3.81 -67 44 41.7
  Extent = 3.0 (2.0-5.6)", rotation angle = 0
  Source counts = 13.5 +/- 5.4
  Background counts = 15.3
  Rate = 0.005 +/- 0.002
[Fri Jun  8 05:42:25 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 05:42:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 05:42:25 2012] Assessing source extent using major axis lower bound
[Fri Jun  8 05:42:25 2012] Source does appear to be extended
[Fri Jun  8 05:42:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 09:08:46 2012] XMMSAS src. selection expression = ellipse(36044.574900, 28109.639000, 181.276205, 181.276205, 0.000000, X, Y)
[Fri Jun  8 09:08:46 2012] Writing source region out to fullrun_mos1_xmm0123500101_pi300-10000_pass1_cl_src4_src.reg
[Fri Jun  8 09:08:46 2012] Extracting stamp from image fullrun_mos1_xmm0123500101_pi300-10000_cl_sm2.00.img.gz, (404, 313) - (425, 334)
[Fri Jun  8 09:08:46 2012] XMMSAS bgd. selection expression = annulus(36044.574900, 28109.639000, 302.127009, 604.254017, X, Y)
[Fri Jun  8 09:08:46 2012] Writing fullrun_mos1_xmm0123500101_pi300-10000_pass1_cl_src4.gif
[Fri Jun  8 09:11:21 2012] Mean detx,y = (-301.71, 8921.50) 
[Fri Jun  8 09:11:22 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  8 09:11:31 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  8 09:11:32 2012] Setting source spectrum file to fullrun_mos1_xmm0123500101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun  8 09:11:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0123500101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jun  8 09:53:43 2012] Not generating rmf since there are only 13 counts
[Fri Jun  8 09:53:43 2012] rmf not generated due to insufficient counts
[Fri Jun  8 10:20:30 2012] Updating aperture counts using extracted products
[Fri Jun  8 10:20:30 2012] Error reading totcts from fullrun_mos1_xmm0123500101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun  8 10:20:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 10:20:31 2012] Using photon index=1.80, rate=0.00478, arf fullrun_mos1_xmm0123500101_pi300-10000_pass1_cl_src4.arf
[Fri Jun  8 10:20:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 10:20:31 2012] Updating source flux to 1.1e-13
[Fri Jun  8 10:20:32 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun  8 10:20:33 2012] xmm0123500101/analysis//spectral/fullrun_mos1_xmm0123500101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete