[Fri May 17 00:38:56 2013] Detection parameters:
  Position = (193.0, 347.3) = 5 40 5.70 -64 3 17.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.1 +/- 16.6
  Background counts = 63.9
  Rate = 0.002 +/- 0.0003

[Fri May 17 00:39:01 2013] Off-axis axis estimate = 8.42'
[Fri May 17 02:43:39 2013] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Fri May 17 02:43:39 2013] Initial guess for spatial extent in simple fitting = 10.64"
[Fri May 17 02:43:39 2013] source mask rpix=2.4, npix_max = 34, mask sum = 27, frac = 0.778
[Fri May 17 02:43:39 2013] Giving source the simple spatial ID 90 for pass 0, mean size = 10.64"
[Fri May 17 11:17:54 2013] fullrun_mos2_xmm0123310101_pi300-10000_cl_pass0_src90.ximg exists
[Fri May 17 11:17:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123310101_pi300-10000_cl_pass0_src90.csv
[Fri May 17 11:17:54 2013] fullrun_mos2_xmm0123310101_pi300-10000_cl_pass0_src90_1.ximg exists
[Fri May 17 11:17:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123310101_pi300-10000_cl_pass0_src90.csv
[Fri May 17 11:17:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0123310101_pi300-10000_cl_pass0_src90_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0123310101_pi300-10000_cl_pass0_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 11:17:57 2013] fullrun_mos2_xmm0123310101_pi300-10000_cl_pass0_tfrozen_src90.ximg exists
[Fri May 17 11:17:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123310101_pi300-10000_cl_pass0_tfrozen_src90.csv
[Fri May 17 11:17:57 2013] fullrun_mos2_xmm0123310101_pi300-10000_cl_pass0_tfrozen_src90_1.ximg exists
[Fri May 17 11:17:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123310101_pi300-10000_cl_pass0_tfrozen_src90.csv
[Fri May 17 11:17:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0123310101_pi300-10000_cl_pass0_tfrozen_src90_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0123310101_pi300-10000_cl_pass0_tfrozen_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 11:18:28 2013] Warning: source 90 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 12.988351 pixels away
[Fri May 17 11:18:28 2013] Vigneting correction estimate = 1.000000
[Fri May 17 11:18:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 11:18:28 2013] Assessing source extent using major
[Fri May 17 11:18:28 2013] Source does appear to be extended
[Fri May 17 11:18:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 12:57:58 2013] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Fri May 17 12:57:58 2013] Initial guess for spatial extent in simple fitting = 10.64"
[Fri May 17 12:57:58 2013] source mask rpix=2.4, npix_max = 34, mask sum = 27, frac = 0.778
[Fri May 17 12:57:58 2013] Giving source the simple spatial ID 82 for pass 1, mean size = 10.64"
[Fri May 17 20:30:40 2013] fullrun_mos2_xmm0123310101_pi300-10000_cl_pass1_src82.ximg exists
[Fri May 17 20:30:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123310101_pi300-10000_cl_pass1_src82.csv
[Fri May 17 20:30:40 2013] fullrun_mos2_xmm0123310101_pi300-10000_cl_pass1_src82_1.ximg exists
[Fri May 17 20:30:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123310101_pi300-10000_cl_pass1_src82.csv
[Fri May 17 20:30:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0123310101_pi300-10000_cl_pass1_src82_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0123310101_pi300-10000_cl_pass1_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 20:30:42 2013] fullrun_mos2_xmm0123310101_pi300-10000_cl_pass1_tfrozen_src82.ximg exists
[Fri May 17 20:30:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123310101_pi300-10000_cl_pass1_tfrozen_src82.csv
[Fri May 17 20:30:42 2013] fullrun_mos2_xmm0123310101_pi300-10000_cl_pass1_tfrozen_src82_1.ximg exists
[Fri May 17 20:30:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123310101_pi300-10000_cl_pass1_tfrozen_src82.csv
[Fri May 17 20:30:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0123310101_pi300-10000_cl_pass1_tfrozen_src82_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0123310101_pi300-10000_cl_pass1_tfrozen_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 20:31:17 2013] Source 21 is offset by -1.582713 and -6.653847 pixels which is larger than
2 X fitted extent = 1.291844 x 1.291844, not incorporating fit results
[Fri May 17 20:31:17 2013] Vigneting correction estimate = 1.000000
[Fri May 17 20:31:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 20:31:17 2013] Assessing source extent using major
[Fri May 17 20:31:17 2013] Source does appear to be extended
[Fri May 17 20:31:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 21:48:21 2013] XMMSAS src. selection expression = ellipse(16746.226334, 30162.709320, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 17 21:48:21 2013] Writing source region out to fullrun_mos2_xmm0123310101_pi300-10000_pass1_cl_src21_src.reg
[Fri May 17 21:48:21 2013] Extracting stamp from image fullrun_mos2_xmm0123310101_pi300-10000_cl_sm2.00.img.gz, (156, 310) - (231, 385)
[Fri May 17 21:48:21 2013] XMMSAS bgd. selection expression = annulus(16746.226334, 30162.709320, 1087.500000, 2175.000000, X, Y) && !ellipse(18856.507339, 32410.895203, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(18909.485794, 31455.097931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19372.343689, 31725.889679, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 17 21:48:21 2013] Writing fullrun_mos2_xmm0123310101_pi300-10000_pass1_cl_src21.gif
[Fri May 17 22:11:42 2013] Mean detx,y = (6445.97, 7119.68) 
[Fri May 17 22:11:43 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 22:12:00 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 22:12:00 2013] Setting source spectrum file to fullrun_mos2_xmm0123310101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri May 17 22:12:00 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0123310101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Fri May 17 22:39:42 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 17 22:39:42 2013] rmf not generated due to insufficient counts
[Fri May 17 22:46:43 2013] Updating aperture counts using extracted products
[Fri May 17 22:46:43 2013] Total counts from fullrun_mos2_xmm0123310101_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 79.00
[Fri May 17 22:46:43 2013] Total counts from fullrun_mos2_xmm0123310101_pi300-10000_pass1_cl_src21_bgd.pi.gz = 533.00
[Fri May 17 22:46:43 2013] Got source and background scale factors 968230.000000, 6516485.000000
[Fri May 17 22:46:43 2013] User source parameters:
  Position = (193.0, 347.3) = 5 40 5.70 -64 3 17.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -0.2 +/- 9.9
  Background aperture counts = 79.2
  Rate = -5e-06 +/- 0.0003

[Fri May 17 22:46:43 2013] Updating counts from extracted products
[Fri May 17 22:46:43 2013] Set source signif. to -0.19/8.90 = -0.02
[Fri May 17 22:46:50 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 22:46:50 2013] Using photon index=1.80, rate=-5.19e-06, arf fullrun_mos2_xmm0123310101_pi300-10000_pass1_cl_src21.arf
[Fri May 17 22:46:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 22:46:50 2013] Updated flux is not positive, keeping original flux
[Fri May 17 22:46:55 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 17 22:46:57 2013] xmm0123310101/analysis//spectral/fullrun_mos2_xmm0123310101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete