[Fri May 17 00:38:56 2013] Detection parameters:
  Position = (297.7, 322.1) = 5 38 56.32 -64 5 2.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9872.1 +/- 117.5
  Background counts = 3.8
  Rate = 0.2 +/- 0.002

[Fri May 17 00:39:01 2013] Off-axis axis estimate = 1.72'
[Fri May 17 02:43:39 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri May 17 02:43:39 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Fri May 17 02:43:39 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Fri May 17 02:43:39 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Fri May 17 11:17:51 2013] fullrun_mos2_xmm0123310101_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 17 11:17:51 2013] fullrun_mos2_xmm0123310101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 17 11:17:51 2013] Fit fullrun_mos2_xmm0123310101_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri May 17 11:17:54 2013] fullrun_mos2_xmm0123310101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 17 11:17:54 2013] fullrun_mos2_xmm0123310101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 17 11:17:54 2013] Fit fullrun_mos2_xmm0123310101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri May 17 11:18:28 2013] Spatial fit model total counts = 6569.240000, observed total counts = 6429.000000
[Fri May 17 11:18:28 2013] Offset between fit and detection position for source 1 = 0.184604 pixels
[Fri May 17 11:18:28 2013] 6585.210000 total counts/ 1635.750000 bgd. counts: snr = 122.376874
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.184604 pixels
  Position = (297.6, 322.2) = 5 38 56.42 -64 5 3.2
  Extent = 5.3 (5.2-5.5)" x 4.9 (4.8-5.1)", rotation angle = 339 (325-353) degrees
  Source counts = 4949.5 +/- 81.1
  Background counts = 1635.8
  Rate = 0.1 +/- 0.002
[Fri May 17 11:18:28 2013] Vigneting correction estimate = 1.000000
[Fri May 17 11:18:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 11:18:28 2013] Assessing source extent using major axis lower bound
[Fri May 17 11:18:28 2013] Source does appear to be extended
[Fri May 17 11:18:28 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.03
[Fri May 17 12:57:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 17 12:57:58 2013] Initial guess for spatial extent in simple fitting = 5.13"
[Fri May 17 12:57:58 2013] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.798
[Fri May 17 12:57:58 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.13"
[Fri May 17 20:30:38 2013] fullrun_mos2_xmm0123310101_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 17 20:30:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123310101_pi300-10000_cl_pass1_src1.csv
[Fri May 17 20:30:38 2013] fullrun_mos2_xmm0123310101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 17 20:30:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123310101_pi300-10000_cl_pass1_src1.csv
[Fri May 17 20:30:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0123310101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0123310101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 20:30:40 2013] fullrun_mos2_xmm0123310101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 17 20:30:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123310101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May 17 20:30:40 2013] fullrun_mos2_xmm0123310101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 17 20:30:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123310101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May 17 20:30:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0123310101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0123310101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 20:31:17 2013] Warning, spatial fit 1 centroid is now closest to src. 90
[Fri May 17 20:31:17 2013] Vigneting correction estimate = 1.000000
[Fri May 17 20:31:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 20:31:17 2013] Assessing source extent using major axis lower bound
[Fri May 17 20:31:17 2013] Source does appear to be extended
[Fri May 17 20:31:17 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.03
[Fri May 17 21:48:18 2013] Counts = 4949.460000, rescaling region sizes by 2.000000
[Fri May 17 21:48:18 2013] XMMSAS src. selection expression = ellipse(25839.310400, 27987.129400, 640.189218, 591.369617, 338.531400, X, Y)
[Fri May 17 21:48:18 2013] Writing source region out to fullrun_mos2_xmm0123310101_pi300-10000_pass1_cl_src1_src.reg
[Fri May 17 21:48:18 2013] Extracting stamp from image fullrun_mos2_xmm0123310101_pi300-10000_cl_sm2.00.img.gz, (261, 285) - (334, 359)
[Fri May 17 21:48:18 2013] XMMSAS bgd. selection expression = annulus(25839.310400, 27987.129400, 2133.964061, 4267.928123, X, Y) && !ellipse(24184.748901, 30212.592010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26756.543030, 28425.074951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27101.641083, 27901.378387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23889.321136, 25949.175171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24839.771179, 30054.431915, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 17 21:48:18 2013] Writing fullrun_mos2_xmm0123310101_pi300-10000_pass1_cl_src1.gif
[Fri May 17 21:48:26 2013] Mean detx,y = (106.14, 136.12) 
[Fri May 17 21:48:27 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 21:49:15 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 21:49:16 2013] Setting source spectrum file to fullrun_mos2_xmm0123310101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May 17 21:49:16 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0123310101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri May 17 22:46:31 2013] Updating aperture counts using extracted products
[Fri May 17 22:46:31 2013] Total counts from fullrun_mos2_xmm0123310101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 6153.00
[Fri May 17 22:46:31 2013] Total counts from fullrun_mos2_xmm0123310101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1433.00
[Fri May 17 22:46:31 2013] Got source and background scale factors 1196800.000000, 23482537.000000
[Fri May 17 22:46:31 2013] User source parameters:
  Position = (297.6, 322.2) = 5 38 56.42 -64 5 3.2
  Extent = 5.3 (5.2-5.5)" x 4.9 (4.8-5.1)", rotation angle = 339 (325-353) degrees
  Source aperture counts = 6080.0 +/- 79.4
  Background aperture counts = 73.0
  Rate = 0.2 +/- 0.002

[Fri May 17 22:46:48 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 22:46:48 2013] Using photon index=1.80, rate=0.132, arf fullrun_mos2_xmm0123310101_pi300-10000_pass1_cl_src1.arf
[Fri May 17 22:46:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 22:46:48 2013] Updating source flux to 1.5e-12
[Fri May 17 22:46:57 2013] xmm0123310101/analysis//spectral/fullrun_mos2_xmm0123310101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete