[Tue May 15 13:29:54 2012] Detection parameters:
  Position = (105.6, 281.0) = 1 6 31.23 -72 3 47.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 394.9 +/- 25.8
  Background counts = 24.6
  Rate = 0.02 +/- 0.001

[Tue May 15 13:29:58 2012] Off-axis axis estimate = 14.03'
[Tue May 15 13:34:21 2012] Using EEF radius (= 13.45 ")to estimate initial spatial extent for simple fitting
[Tue May 15 13:34:21 2012] Initial guess for spatial extent in simple fitting = 13.45"
[Tue May 15 13:34:21 2012] source mask rpix=3.1, npix_max = 51, mask sum = 52, frac = 1.008
[Tue May 15 13:34:21 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 13.45"
[Tue May 15 19:38:04 2012] fullrun_pn_xmm0123110201_pi300-10000_cl_pass0_src10.ximg exists
[Tue May 15 19:38:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0123110201_pi300-10000_cl_pass0_src10.csv
[Tue May 15 19:38:04 2012] fullrun_pn_xmm0123110201_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue May 15 19:38:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0123110201_pi300-10000_cl_pass0_src10.csv
[Tue May 15 19:38:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0123110201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0123110201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 19:38:06 2012] fullrun_pn_xmm0123110201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue May 15 19:38:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0123110201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue May 15 19:38:06 2012] fullrun_pn_xmm0123110201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue May 15 19:38:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0123110201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue May 15 19:38:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0123110201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0123110201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 00:24:15 2012] Spatial fit model total counts = 1446.400000, observed total counts = 1212.000000
[Wed May 16 00:24:15 2012] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 16 00:24:15 2012] Warning, spatial fit 10 centroid is now closest to src. 12
[Wed May 16 00:24:15 2012] Vigneting correction estimate = 1.000000
[Wed May 16 00:24:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 00:24:15 2012] Assessing source extent using major
[Wed May 16 00:24:15 2012] Source does appear to be extended
[Wed May 16 00:24:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 00:24:47 2012] Using EEF radius (= 13.45 ")to estimate initial spatial extent for simple fitting
[Wed May 16 00:24:47 2012] Initial guess for spatial extent in simple fitting = 13.45"
[Wed May 16 00:24:47 2012] source mask rpix=3.1, npix_max = 51, mask sum = 52, frac = 1.008
[Wed May 16 00:24:47 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 13.45"
[Wed May 16 07:35:15 2012] fullrun_pn_xmm0123110201_pi300-10000_cl_pass1_src10.ximg exists
[Wed May 16 07:35:15 2012] fullrun_pn_xmm0123110201_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed May 16 07:35:15 2012] Fit fullrun_pn_xmm0123110201_pi300-10000_cl_pass1_src10 appears to have run properly
[Wed May 16 07:35:18 2012] fullrun_pn_xmm0123110201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed May 16 07:35:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0123110201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed May 16 07:35:18 2012] fullrun_pn_xmm0123110201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed May 16 07:35:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0123110201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed May 16 07:35:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0123110201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0123110201_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 10:04:50 2012] Spatial fit model total counts = 1388.150000, observed total counts = 1270.000000
[Wed May 16 10:04:50 2012] Offset between fit and detection position for source 11 = 3.010019 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 3.010019 pixels
  Position = (108.2, 282.7) = 1 6 28.84 -72 3 42.0
  Extent = 21.3" x 21.3", rotation angle = 0
  Source counts = 1195.5 +/- 34.6
  Background counts = 0.0
  Rate = 0.06 +/- 0.002
[Wed May 16 10:04:51 2012] Vigneting correction estimate = 1.000000
[Wed May 16 10:04:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 10:04:51 2012] Assessing source extent using major
[Wed May 16 10:04:51 2012] Source does appear to be extended
[Wed May 16 10:04:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 10:04:51 2012] Source is confused with source 10
[Wed May 16 10:05:23 2012] Counts = 1195.510000, rescaling region sizes by 2.000000
[Wed May 16 10:05:23 2012] XMMSAS src. selection expression = ellipse(9362.126000, 24542.479600, 2560.440074, 2560.440074, 0.000000, X, Y)
[Wed May 16 10:05:23 2012] Writing source region out to fullrun_pn_xmm0123110201_pi300-10000_pass1_cl_src11_src.reg
[Wed May 16 10:05:23 2012] Extracting stamp from image fullrun_pn_xmm0123110201_pi300-10000_cl_sm2.00.img.gz, (0, 136) - (255, 430)
[Wed May 16 10:05:23 2012] XMMSAS bgd. selection expression = annulus(9362.126000, 24542.479600, 8534.800246, 17069.600491, X, Y) && !ellipse(22803.387604, 26630.068054, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25186.607140, 27254.407000, 454.983213, 427.320012, 89.814896, X, Y) && !ellipse(14605.186813, 12825.596344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14644.392303, 25308.912201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13678.755493, 25141.953339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23311.007965, 26991.409576, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(12166.328674, 24915.617401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12755.126000, 25151.479600, 1706.960049, 1706.960049, 0.000000, X, Y) && !ellipse(11597.588211, 24872.916565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10623.626000, 24759.979600, 1706.960049, 1706.960049, 0.000000, X, Y) && !ellipse(8292.796913, 24232.701385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10770.566000, 22879.389200, 735.138421, 735.138421, 0.000000, X, Y) && !ellipse(10339.880257, 21749.529480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22767.905792, 27439.159027, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(13969.501114, 37122.425232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15421.022888, 32902.999573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27455.560000, 27749.856200, 2442.928070, 2442.928070, 0.000000, X, Y) && !ellipse(18682.569733, 26685.704193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15957.430405, 26265.200653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18815.349075, 26010.692200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19528.261612, 26110.117737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15086.282104, 26081.939911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14567.132278, 25964.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20216.434586, 26214.534729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17952.699524, 25883.011841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16558.633911, 25604.913452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15328.098190, 25403.338318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11885.475693, 25472.446075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17097.857086, 25700.375031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14123.495468, 25220.223602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10645.150879, 25290.255310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15980.460129, 25502.726685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25307.040405, 25110.130157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12460.574600, 24439.795600, 322.543209, 322.543209, 0.000000, X, Y) && !ellipse(10037.813591, 22431.455170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19576.412600, 22359.887600, 429.680012, 429.680012, 0.000000, X, Y) && !ellipse(19612.598020, 21326.859800, 371.116811, 371.116811, 0.000000, X, Y) && !ellipse(26313.048942, 21040.090200, 486.543214, 486.543214, 0.000000, X, Y) && !ellipse(18130.344879, 16647.303925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16715.102753, 14929.822556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14253.647000, 15567.176000, 1757.440051, 1757.440051, 0.000000, X, Y) && !ellipse(15118.831436, 15524.562393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14283.176800, 15192.214000, 1330.176038, 1330.176038, 0.000000, X, Y) && !ellipse(20553.064423, 29886.079163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25280.476837, 17293.498230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25248.056274, 16607.908600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27030.621704, 37081.744873, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 16 10:05:23 2012] Writing fullrun_pn_xmm0123110201_pi300-10000_pass1_cl_src11.gif
[Wed May 16 11:21:46 2012] Mean detx,y = (55.89, -14572.17) 
[Wed May 16 11:21:55 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 16 11:31:30 2012] Binned source spectrum to 10 counts/bin
[Wed May 16 11:31:32 2012] Setting source spectrum file to fullrun_pn_xmm0123110201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed May 16 11:31:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0123110201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu May 17 01:28:05 2012] Updating aperture counts using extracted products
[Thu May 17 01:28:05 2012] Error reading totcts from fullrun_pn_xmm0123110201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu May 17 01:28:10 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 01:28:10 2012] Using photon index=1.80, rate=0.0638, arf fullrun_pn_xmm0123110201_pi300-10000_pass1_cl_src11.arf
[Thu May 17 01:28:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 01:28:10 2012] Updating source flux to 3.6e-13
[Thu May 17 01:34:06 2012] Flag p found in src. 11 procflags, skipping spectral fitting
[Thu May 17 01:34:06 2012] Flag c found in src. 11 procflags, skipping spectral fitting