[Tue May 15 13:30:42 2012] Detection parameters:
  Position = (315.2, 207.9) = 1 3 13.80 -72 9 12.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 442.9 +/- 25.3
  Background counts = 8.7
  Rate = 0.04 +/- 0.002

[Tue May 15 13:30:43 2012] Off-axis axis estimate = 6.67'
[Tue May 15 19:38:08 2012] Using EEF radius (= 9.76 ")to estimate initial spatial extent for simple fitting
[Tue May 15 19:38:08 2012] Initial guess for spatial extent in simple fitting = 9.76"
[Tue May 15 19:38:08 2012] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.195
[Tue May 15 19:38:08 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.76"
[Tue May 15 22:56:27 2012] fullrun_mos1_xmm0123110201_pi300-10000_cl_pass0_src5.ximg exists
[Tue May 15 22:56:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0123110201_pi300-10000_cl_pass0_src5.csv
[Tue May 15 22:56:27 2012] fullrun_mos1_xmm0123110201_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue May 15 22:56:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0123110201_pi300-10000_cl_pass0_src5.csv
[Tue May 15 22:56:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0123110201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0123110201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 22:56:28 2012] fullrun_mos1_xmm0123110201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue May 15 22:56:28 2012] fullrun_mos1_xmm0123110201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue May 15 22:56:28 2012] Fit fullrun_mos1_xmm0123110201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed May 16 00:24:22 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 13.318745 pixels away
[Wed May 16 00:24:22 2012] Vigneting correction estimate = 1.000000
[Wed May 16 00:24:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 00:24:22 2012] Assessing source extent using major
[Wed May 16 00:24:22 2012] Source does appear to be extended
[Wed May 16 00:24:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 07:35:20 2012] Using EEF radius (= 9.76 ")to estimate initial spatial extent for simple fitting
[Wed May 16 07:35:20 2012] Initial guess for spatial extent in simple fitting = 9.76"
[Wed May 16 07:35:20 2012] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.195
[Wed May 16 07:35:20 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.76"
[Wed May 16 09:30:40 2012] fullrun_mos1_xmm0123110201_pi300-10000_cl_pass1_src5.ximg exists
[Wed May 16 09:30:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0123110201_pi300-10000_cl_pass1_src5.csv
[Wed May 16 09:30:40 2012] fullrun_mos1_xmm0123110201_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed May 16 09:30:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0123110201_pi300-10000_cl_pass1_src5.csv
[Wed May 16 09:30:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0123110201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0123110201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 09:30:40 2012] fullrun_mos1_xmm0123110201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed May 16 09:30:40 2012] fullrun_mos1_xmm0123110201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed May 16 09:30:40 2012] Fit fullrun_mos1_xmm0123110201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed May 16 10:04:57 2012] Spatial fit model total counts = 529.000000, observed total counts = 529.000000
[Wed May 16 10:04:57 2012] Offset between fit and detection position for source 8 = 0.087689 pixels
[Wed May 16 10:04:57 2012] 526.662000 total counts/ 204.103000 bgd. counts: snr = 22.577948
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.087689 pixels
  Position = (315.3, 207.9) = 1 3 13.74 -72 9 12.3
  Extent = 6.4 (5.7-7.1)", rotation angle = 0
  Source counts = 322.6 +/- 22.9
  Background counts = 204.1
  Rate = 0.02 +/- 0.001
[Wed May 16 10:04:57 2012] Vigneting correction estimate = 1.000000
[Wed May 16 10:04:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 10:04:57 2012] Assessing source extent using major axis lower bound
[Wed May 16 10:04:57 2012] Source does appear to be extended
[Wed May 16 10:04:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 21:15:06 2012] XMMSAS src. selection expression = ellipse(27381.116800, 18037.700600, 382.084211, 382.084211, 0.000000, X, Y)
[Wed May 16 21:15:06 2012] Writing source region out to fullrun_mos1_xmm0123110201_pi300-10000_pass1_cl_src8_src.reg
[Wed May 16 21:15:06 2012] Extracting stamp from image fullrun_mos1_xmm0123110201_pi300-10000_cl_sm2.00.img.gz, (293, 186) - (337, 230)
[Wed May 16 21:15:06 2012] XMMSAS bgd. selection expression = annulus(27381.116800, 18037.700600, 636.807018, 1273.614037, X, Y)
[Wed May 16 21:15:06 2012] Writing fullrun_mos1_xmm0123110201_pi300-10000_pass1_cl_src8.gif
[Wed May 16 22:04:49 2012] Mean detx,y = (-1555.36, -9384.43) 
[Wed May 16 22:04:52 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 16 22:05:00 2012] Binned source spectrum to 10 counts/bin
[Wed May 16 22:05:01 2012] Setting source spectrum file to fullrun_mos1_xmm0123110201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed May 16 22:05:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0123110201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu May 17 01:28:14 2012] Updating aperture counts using extracted products
[Thu May 17 01:28:14 2012] Error reading totcts from fullrun_mos1_xmm0123110201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu May 17 01:28:15 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 01:28:15 2012] Using photon index=1.80, rate=0.0183, arf fullrun_mos1_xmm0123110201_pi300-10000_pass1_cl_src8.arf
[Thu May 17 01:28:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 01:28:15 2012] Updating source flux to 3.4e-13