[Thu May 17 13:33:44 2012] Detection parameters:
  Position = (323.1, 226.0) = 7 43 49.11 74 27 1.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 197.8 +/- 19.4
  Background counts = 29.5
  Rate = 0.02 +/- 0.002

[Thu May 17 13:33:44 2012] Off-axis axis estimate = 5.55'
[Thu May 17 13:38:35 2012] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Thu May 17 13:38:35 2012] Initial guess for spatial extent in simple fitting = 9.20"
[Thu May 17 13:38:35 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.316
[Thu May 17 13:38:35 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 9.20"
[Thu May 17 17:14:06 2012] fullrun_pn_xmm0123100201_pi300-10000_cl_pass0_src44.ximg exists
[Thu May 17 17:14:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0123100201_pi300-10000_cl_pass0_src44.csv
[Thu May 17 17:14:06 2012] fullrun_pn_xmm0123100201_pi300-10000_cl_pass0_src44_1.ximg exists
[Thu May 17 17:14:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0123100201_pi300-10000_cl_pass0_src44.csv
[Thu May 17 17:14:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0123100201_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0123100201_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 17:14:08 2012] fullrun_pn_xmm0123100201_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Thu May 17 17:14:08 2012] fullrun_pn_xmm0123100201_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Thu May 17 17:14:08 2012] Fit fullrun_pn_xmm0123100201_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Thu May 17 20:23:28 2012] Spatial fit model total counts = 660.507000, observed total counts = 657.000000
[Thu May 17 20:23:28 2012] Offset between fit and detection position for source 49 = 0.517853 pixels
[Thu May 17 20:23:28 2012] 511.083000 total counts/ 255.730000 bgd. counts: snr = 15.967985
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 0.517853 pixels
  Position = (323.1, 225.5) = 7 43 49.07 74 26 59.2
  Extent = 11.0 (9.4-13.5)", rotation angle = 0
  Source counts = 255.4 +/- 22.6
  Background counts = 255.7
  Rate = 0.01 +/- 0.001
[Thu May 17 20:23:29 2012] Vigneting correction estimate = 1.000000
[Thu May 17 20:23:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 20:23:29 2012] Assessing source extent using major axis lower bound
[Thu May 17 20:23:29 2012] Source does appear to be extended
[Thu May 17 20:23:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 20:23:29 2012] Source is confused with source 50
[Thu May 17 20:24:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 17 20:24:06 2012] Initial guess for spatial extent in simple fitting = 11.01"
[Thu May 17 20:24:06 2012] source mask rpix=2.5, npix_max = 36, mask sum = 42, frac = 1.143
[Thu May 17 20:24:06 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 11.01"
[Fri May 18 00:40:54 2012] fullrun_pn_xmm0123100201_pi300-10000_cl_pass1_src41.ximg exists
[Fri May 18 00:40:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0123100201_pi300-10000_cl_pass1_src41.csv
[Fri May 18 00:40:54 2012] fullrun_pn_xmm0123100201_pi300-10000_cl_pass1_src41_1.ximg exists
[Fri May 18 00:40:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0123100201_pi300-10000_cl_pass1_src41.csv
[Fri May 18 00:40:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0123100201_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0123100201_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 00:40:55 2012] fullrun_pn_xmm0123100201_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Fri May 18 00:40:55 2012] fullrun_pn_xmm0123100201_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Fri May 18 00:40:55 2012] Fit fullrun_pn_xmm0123100201_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Fri May 18 02:33:22 2012] Warning, spatial fit 41 centroid is now closest to src. 51
[Fri May 18 02:33:22 2012] Vigneting correction estimate = 1.000000
[Fri May 18 02:33:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 02:33:22 2012] Assessing source extent using major axis lower bound
[Fri May 18 02:33:22 2012] Source does appear to be extended
[Fri May 18 02:33:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 02:33:53 2012] XMMSAS src. selection expression = ellipse(28064.998420, 19569.122200, 660.588019, 660.588019, 0.000000, X, Y)
[Fri May 18 02:33:53 2012] Writing source region out to fullrun_pn_xmm0123100201_pi300-10000_pass1_cl_src49_src.reg
[Fri May 18 02:33:53 2012] Extracting stamp from image fullrun_pn_xmm0123100201_pi300-10000_cl_sm2.00.img.gz, (285, 188) - (361, 263)
[Fri May 18 02:33:53 2012] XMMSAS bgd. selection expression = annulus(28064.998420, 19569.122200, 1100.980032, 2201.960063, X, Y) && !ellipse(27977.539920, 20628.638400, 580.333617, 580.333617, 0.000000, X, Y) && !ellipse(27590.736200, 22889.654000, 1155.040033, 1155.040033, 0.000000, X, Y) && !ellipse(30383.656000, 22469.708000, 2620.184075, 2620.184075, 0.000000, X, Y) && !ellipse(27657.273040, 21875.827000, 1761.568051, 422.141612, 81.665000, X, Y) && !ellipse(29022.702000, 21700.404000, 1383.776040, 1383.776040, 0.000000, X, Y) && !ellipse(28073.385182, 19410.457072, 1761.568051, 419.735708, 80.785232, X, Y) && !ellipse(28226.643372, 18474.014526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28316.318994, 17915.717119, 1587.672046, 414.413293, 78.190539, X, Y) && !ellipse(28423.959839, 17180.368759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28477.899414, 16747.859177, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 18 02:33:53 2012] Writing fullrun_pn_xmm0123100201_pi300-10000_pass1_cl_src49.gif
[Fri May 18 03:44:51 2012] Mean detx,y = (122.33, 8086.16) 
[Fri May 18 03:44:56 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 03:45:26 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 03:45:27 2012] Setting source spectrum file to fullrun_pn_xmm0123100201_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Fri May 18 03:45:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0123100201_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Fri May 18 08:21:33 2012] Updating aperture counts using extracted products
[Fri May 18 08:21:33 2012] Error reading totcts from fullrun_pn_xmm0123100201_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Fri May 18 08:21:36 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 08:21:36 2012] Using photon index=1.80, rate=0.0133, arf fullrun_pn_xmm0123100201_pi300-10000_pass1_cl_src49.arf
[Fri May 18 08:21:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 08:21:36 2012] Updating source flux to 4.7e-14
[Fri May 18 08:23:20 2012] Flag c found in src. 49 procflags, skipping spectral fitting