[Thu May 17 13:33:43 2012] Detection parameters:
  Position = (380.3, 345.4) = 7 42 46.45 74 35 38.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.9 +/- 13.7
  Background counts = 28.0
  Rate = 0.007 +/- 0.001

[Thu May 17 13:33:44 2012] Off-axis axis estimate = 6.84'
[Thu May 17 13:38:35 2012] Using EEF radius (= 9.85 ")to estimate initial spatial extent for simple fitting
[Thu May 17 13:38:35 2012] Initial guess for spatial extent in simple fitting = 9.85"
[Thu May 17 13:38:35 2012] source mask rpix=2.3, npix_max = 30, mask sum = 23, frac = 0.753
[Thu May 17 13:38:35 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 9.85"
[Thu May 17 17:14:06 2012] fullrun_pn_xmm0123100201_pi300-10000_cl_pass0_src23.ximg exists
[Thu May 17 17:14:06 2012] fullrun_pn_xmm0123100201_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu May 17 17:14:06 2012] Fit fullrun_pn_xmm0123100201_pi300-10000_cl_pass0_src23 appears to have run properly
[Thu May 17 17:14:07 2012] fullrun_pn_xmm0123100201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu May 17 17:14:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0123100201_pi300-10000_cl_pass0_tfrozen_src23.csv
[Thu May 17 17:14:07 2012] fullrun_pn_xmm0123100201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu May 17 17:14:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0123100201_pi300-10000_cl_pass0_tfrozen_src23.csv
[Thu May 17 17:14:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0123100201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0123100201_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 20:23:28 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 10.344596 pixels away
[Thu May 17 20:23:29 2012] Vigneting correction estimate = 1.000000
[Thu May 17 20:23:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 20:23:29 2012] Assessing source extent using major
[Thu May 17 20:23:29 2012] Source does appear to be extended
[Thu May 17 20:23:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 20:24:06 2012] Using EEF radius (= 9.85 ")to estimate initial spatial extent for simple fitting
[Thu May 17 20:24:06 2012] Initial guess for spatial extent in simple fitting = 9.85"
[Thu May 17 20:24:06 2012] source mask rpix=2.3, npix_max = 30, mask sum = 23, frac = 0.753
[Thu May 17 20:24:06 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 9.85"
[Fri May 18 00:40:53 2012] fullrun_pn_xmm0123100201_pi300-10000_cl_pass1_src22.ximg exists
[Fri May 18 00:40:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0123100201_pi300-10000_cl_pass1_src22.csv
[Fri May 18 00:40:53 2012] fullrun_pn_xmm0123100201_pi300-10000_cl_pass1_src22_1.ximg exists
[Fri May 18 00:40:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0123100201_pi300-10000_cl_pass1_src22.csv
[Fri May 18 00:40:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0123100201_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0123100201_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 00:40:54 2012] fullrun_pn_xmm0123100201_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Fri May 18 00:40:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0123100201_pi300-10000_cl_pass1_tfrozen_src22.csv
[Fri May 18 00:40:54 2012] fullrun_pn_xmm0123100201_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Fri May 18 00:40:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0123100201_pi300-10000_cl_pass1_tfrozen_src22.csv
[Fri May 18 00:40:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0123100201_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0123100201_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 02:33:22 2012] Spatial fit model total counts = 277.632000, observed total counts = 251.000000
[Fri May 18 02:33:22 2012] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 18 02:33:22 2012] Vigneting correction estimate = 1.000000
[Fri May 18 02:33:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 02:33:22 2012] Assessing source extent using major
[Fri May 18 02:33:22 2012] Source does appear to be extended
[Fri May 18 02:33:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 02:33:52 2012] XMMSAS src. selection expression = ellipse(33036.181152, 29999.143585, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 18 02:33:52 2012] Writing source region out to fullrun_pn_xmm0123100201_pi300-10000_pass1_cl_src25_src.reg
[Fri May 18 02:33:52 2012] Extracting stamp from image fullrun_pn_xmm0123100201_pi300-10000_cl_sm2.00.img.gz, (343, 308) - (418, 383)
[Fri May 18 02:33:52 2012] XMMSAS bgd. selection expression = annulus(33036.181152, 29999.143585, 1087.500000, 2175.000000, X, Y) && !ellipse(32356.945007, 31873.742950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31278.403076, 30494.970306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30005.080231, 29513.841400, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 18 02:33:52 2012] Writing fullrun_pn_xmm0123100201_pi300-10000_pass1_cl_src25.gif
[Fri May 18 03:16:31 2012] Mean detx,y = (6534.71, -1576.20) 
[Fri May 18 03:16:38 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 03:17:37 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 03:17:37 2012] Setting source spectrum file to fullrun_pn_xmm0123100201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Fri May 18 03:17:37 2012] Setting bgd. spectrum file to fullrun_pn_xmm0123100201_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Fri May 18 05:27:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 18 05:27:05 2012] rmf not generated due to insufficient counts
[Fri May 18 08:21:31 2012] Updating aperture counts using extracted products
[Fri May 18 08:21:31 2012] Error reading totcts from fullrun_pn_xmm0123100201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Fri May 18 08:21:35 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 08:21:35 2012] Using photon index=1.80, rate=0.00747, arf fullrun_pn_xmm0123100201_pi300-10000_pass1_cl_src25.arf
[Fri May 18 08:21:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 08:21:35 2012] Updating source flux to 2.6e-14
[Fri May 18 08:23:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting