[Thu May 17 13:35:22 2012] Detection parameters:
  Position = (422.8, 218.0) = 7 42 1.33 74 26 24.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 390.0 +/- 24.0
  Background counts = 5.8
  Rate = 0.04 +/- 0.002

[Thu May 17 13:35:24 2012] Off-axis axis estimate = 10.74'
[Thu May 17 18:49:45 2012] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Thu May 17 18:49:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 17 18:49:45 2012] Initial guess for spatial extent in simple fitting = 11.80"
[Thu May 17 18:49:45 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.872
[Thu May 17 18:49:45 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.80"
[Thu May 17 20:23:06 2012] fullrun_mos2_xmm0123100201_pi300-10000_cl_pass0_src3.ximg exists
[Thu May 17 20:23:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123100201_pi300-10000_cl_pass0_src3.csv
[Thu May 17 20:23:06 2012] fullrun_mos2_xmm0123100201_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu May 17 20:23:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123100201_pi300-10000_cl_pass0_src3.csv
[Thu May 17 20:23:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0123100201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0123100201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 20:23:07 2012] fullrun_mos2_xmm0123100201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu May 17 20:23:07 2012] fullrun_mos2_xmm0123100201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu May 17 20:23:07 2012] Fit fullrun_mos2_xmm0123100201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu May 17 20:23:47 2012] Spatial fit model total counts = 414.000000, observed total counts = 414.000000
[Thu May 17 20:23:47 2012] Offset between fit and detection position for source 2 = 0.238896 pixels
[Thu May 17 20:23:47 2012] 415.316000 total counts/ 148.283000 bgd. counts: snr = 21.929021
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.238896 pixels
  Position = (422.6, 218.0) = 7 42 1.59 74 26 24.3
  Extent = 5.6 (5.2-6.3)", rotation angle = 0
  Source counts = 267.0 +/- 20.4
  Background counts = 148.3
  Rate = 0.01 +/- 0.001
[Thu May 17 20:23:47 2012] Vigneting correction estimate = 1.000000
[Thu May 17 20:23:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 20:23:47 2012] Assessing source extent using major axis lower bound
[Thu May 17 20:23:47 2012] Source does appear to be extended
[Thu May 17 20:23:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 01:14:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 18 01:14:46 2012] Initial guess for spatial extent in simple fitting = 5.63"
[Fri May 18 01:14:46 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.933
[Fri May 18 01:14:46 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.63"
[Fri May 18 02:33:02 2012] fullrun_mos2_xmm0123100201_pi300-10000_cl_pass1_src3.ximg exists
[Fri May 18 02:33:02 2012] fullrun_mos2_xmm0123100201_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri May 18 02:33:02 2012] Fit fullrun_mos2_xmm0123100201_pi300-10000_cl_pass1_src3 appears to have run properly
[Fri May 18 02:33:02 2012] fullrun_mos2_xmm0123100201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri May 18 02:33:02 2012] fullrun_mos2_xmm0123100201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri May 18 02:33:02 2012] Fit fullrun_mos2_xmm0123100201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri May 18 02:33:34 2012] Spatial fit model total counts = 400.000000, observed total counts = 400.000000
[Fri May 18 02:33:34 2012] Offset between fit and detection position for source 2 = 0.008954 pixels
[Fri May 18 02:33:34 2012] 400.535000 total counts/ 135.787000 bgd. counts: snr = 22.719752
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.008954 pixels
  Position = (422.6, 218.0) = 7 42 1.59 74 26 24.4
  Extent = 5.6 (5.1-6.2)", rotation angle = 0
  Source counts = 264.7 +/- 20.0
  Background counts = 135.8
  Rate = 0.01 +/- 0.001
[Fri May 18 02:33:34 2012] Vigneting correction estimate = 1.000000
[Fri May 18 02:33:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 02:33:34 2012] Assessing source extent using major axis lower bound
[Fri May 18 02:33:34 2012] Source does appear to be extended
[Fri May 18 02:33:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 07:28:17 2012] XMMSAS src. selection expression = ellipse(36715.977000, 18921.332600, 335.592610, 335.592610, 0.000000, X, Y)
[Fri May 18 07:28:17 2012] Writing source region out to fullrun_mos2_xmm0123100201_pi300-10000_pass1_cl_src2_src.reg
[Fri May 18 07:28:17 2012] Extracting stamp from image fullrun_mos2_xmm0123100201_pi300-10000_cl_sm2.00.img.gz, (403, 199) - (442, 237)
[Fri May 18 07:28:17 2012] XMMSAS bgd. selection expression = annulus(36715.977000, 18921.332600, 559.321016, 1118.642032, X, Y)
[Fri May 18 07:28:17 2012] Writing fullrun_mos2_xmm0123100201_pi300-10000_pass1_cl_src2.gif
[Fri May 18 07:36:48 2012] Mean detx,y = (-8530.24, -10058.28) 
[Fri May 18 07:36:49 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 07:36:59 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 07:36:59 2012] Setting source spectrum file to fullrun_mos2_xmm0123100201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri May 18 07:36:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0123100201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri May 18 08:21:37 2012] Updating aperture counts using extracted products
[Fri May 18 08:21:37 2012] Error reading totcts from fullrun_mos2_xmm0123100201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri May 18 08:21:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 08:21:38 2012] Using photon index=1.80, rate=0.0134, arf fullrun_mos2_xmm0123100201_pi300-10000_pass1_cl_src2.arf
[Fri May 18 08:21:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 08:21:38 2012] Updating source flux to 3e-13