[Thu May 17 13:35:22 2012] Detection parameters:
  Position = (264.4, 347.6) = 7 44 53.01 74 35 50.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.4 +/- 11.0
  Background counts = 7.9
  Rate = 0.004 +/- 0.0007

[Thu May 17 13:35:24 2012] Off-axis axis estimate = 4.34'
[Thu May 17 18:49:45 2012] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Thu May 17 18:49:45 2012] Initial guess for spatial extent in simple fitting = 8.60"
[Thu May 17 18:49:45 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.019
[Thu May 17 18:49:45 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 8.60"
[Thu May 17 20:23:06 2012] fullrun_mos2_xmm0123100201_pi300-10000_cl_pass0_src11.ximg exists
[Thu May 17 20:23:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123100201_pi300-10000_cl_pass0_src11.csv
[Thu May 17 20:23:06 2012] fullrun_mos2_xmm0123100201_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu May 17 20:23:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123100201_pi300-10000_cl_pass0_src11.csv
[Thu May 17 20:23:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0123100201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0123100201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 20:23:07 2012] fullrun_mos2_xmm0123100201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu May 17 20:23:07 2012] fullrun_mos2_xmm0123100201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu May 17 20:23:07 2012] Fit fullrun_mos2_xmm0123100201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu May 17 20:23:47 2012] Spatial fit model total counts = 136.639000, observed total counts = 135.000000
[Thu May 17 20:23:47 2012] Offset between fit and detection position for source 17 = 0.005061 pixels
[Thu May 17 20:23:47 2012] 135.506900 total counts/ 89.385300 bgd. counts: snr = 4.878332
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.005061 pixels
  Position = (264.4, 347.6) = 7 44 53.01 74 35 50.3
  Extent = 4.1 (3.2-5.2)", rotation angle = 0
  Source counts = 46.1 +/- 11.6
  Background counts = 89.4
  Rate = 0.002 +/- 0.0006
[Thu May 17 20:23:47 2012] Vigneting correction estimate = 1.000000
[Thu May 17 20:23:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 20:23:47 2012] Assessing source extent using major axis lower bound
[Thu May 17 20:23:47 2012] Source does appear to be extended
[Thu May 17 20:23:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 01:14:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 18 01:14:46 2012] Initial guess for spatial extent in simple fitting = 4.14"
[Fri May 18 01:14:46 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.067
[Fri May 18 01:14:46 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 4.14"
[Fri May 18 02:33:02 2012] fullrun_mos2_xmm0123100201_pi300-10000_cl_pass1_src11.ximg exists
[Fri May 18 02:33:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123100201_pi300-10000_cl_pass1_src11.csv
[Fri May 18 02:33:02 2012] fullrun_mos2_xmm0123100201_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri May 18 02:33:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123100201_pi300-10000_cl_pass1_src11.csv
[Fri May 18 02:33:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0123100201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0123100201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 02:33:02 2012] fullrun_mos2_xmm0123100201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri May 18 02:33:02 2012] fullrun_mos2_xmm0123100201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri May 18 02:33:02 2012] Fit fullrun_mos2_xmm0123100201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri May 18 02:33:34 2012] Spatial fit model total counts = 136.641000, observed total counts = 135.000000
[Fri May 18 02:33:34 2012] Offset between fit and detection position for source 17 = 0.000678 pixels
[Fri May 18 02:33:34 2012] 135.506200 total counts/ 89.261200 bgd. counts: snr = 4.894783
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.000678 pixels
  Position = (264.4, 347.6) = 7 44 53.01 74 35 50.3
  Extent = 4.2 (3.2-5.2)", rotation angle = 0
  Source counts = 46.2 +/- 11.6
  Background counts = 89.3
  Rate = 0.002 +/- 0.0006
[Fri May 18 02:33:34 2012] Vigneting correction estimate = 1.000000
[Fri May 18 02:33:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 02:33:34 2012] Assessing source extent using major axis lower bound
[Fri May 18 02:33:34 2012] Source does appear to be extended
[Fri May 18 02:33:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 07:28:17 2012] XMMSAS src. selection expression = ellipse(22950.542200, 30193.467000, 249.963007, 249.963007, 0.000000, X, Y)
[Fri May 18 07:28:17 2012] Writing source region out to fullrun_mos2_xmm0123100201_pi300-10000_pass1_cl_src17_src.reg
[Fri May 18 07:28:17 2012] Extracting stamp from image fullrun_mos2_xmm0123100201_pi300-10000_cl_sm2.00.img.gz, (250, 333) - (279, 362)
[Fri May 18 07:28:17 2012] XMMSAS bgd. selection expression = annulus(22950.542200, 30193.467000, 416.605012, 833.210024, X, Y)
[Fri May 18 07:28:17 2012] Writing fullrun_mos2_xmm0123100201_pi300-10000_pass1_cl_src17.gif
[Fri May 18 07:41:06 2012] Mean detx,y = (3538.64, 3022.88) 
[Fri May 18 07:41:09 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 07:41:23 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 07:41:23 2012] Setting source spectrum file to fullrun_mos2_xmm0123100201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri May 18 07:41:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0123100201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Fri May 18 08:20:32 2012] Not generating rmf since there are only 46 counts
[Fri May 18 08:20:32 2012] rmf not generated due to insufficient counts
[Fri May 18 08:21:38 2012] Updating aperture counts using extracted products
[Fri May 18 08:21:38 2012] Error reading totcts from fullrun_mos2_xmm0123100201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri May 18 08:21:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 08:21:38 2012] Using photon index=1.80, rate=0.00234, arf fullrun_mos2_xmm0123100201_pi300-10000_pass1_cl_src17.arf
[Fri May 18 08:21:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 08:21:38 2012] Updating source flux to 4.1e-14
[Fri May 18 08:22:03 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting