[Thu May 17 13:34:34 2012] Detection parameters:
  Position = (309.0, 321.9) = 7 44 4.26 74 33 58.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27624.2 +/- 198.5
  Background counts = 11.3
  Rate = 1 +/- 0.01

[Thu May 17 13:34:36 2012] Off-axis axis estimate = 1.87'
[Thu May 17 17:14:08 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Thu May 17 17:14:08 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Thu May 17 17:14:08 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.832
[Thu May 17 17:14:08 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.36"
[Thu May 17 18:49:44 2012] fullrun_mos1_xmm0123100201_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 17 18:49:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0123100201_pi300-10000_cl_pass0_src1.csv
[Thu May 17 18:49:44 2012] fullrun_mos1_xmm0123100201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 17 18:49:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0123100201_pi300-10000_cl_pass0_src1.csv
[Thu May 17 18:49:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0123100201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0123100201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 18:49:45 2012] fullrun_mos1_xmm0123100201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 17 18:49:45 2012] fullrun_mos1_xmm0123100201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 17 18:49:45 2012] Fit fullrun_mos1_xmm0123100201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 17 20:23:38 2012] Spatial fit model total counts = 22699.000000, observed total counts = 23866.000000
[Thu May 17 20:23:38 2012] Offset between fit and detection position for source 2 = 0.266287 pixels
[Thu May 17 20:23:38 2012] 23032.300000 total counts/ 2997.000000 bgd. counts: snr = 365.975892
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.266287 pixels
  Position = (308.8, 321.9) = 7 44 4.56 74 33 58.8
  Extent = 6.0 (6.0-6.0)", rotation angle = 0
  Source counts = 20035.3 +/- 151.8
  Background counts = 2997.0
  Rate = 1 +/- 0.008
[Thu May 17 20:23:38 2012] Vigneting correction estimate = 1.000000
[Thu May 17 20:23:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 20:23:38 2012] Assessing source extent using major axis lower bound
[Thu May 17 20:23:38 2012] Source does appear to be extended
[Thu May 17 20:23:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 00:40:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 18 00:40:55 2012] Initial guess for spatial extent in simple fitting = 6.02"
[Fri May 18 00:40:55 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.126
[Fri May 18 00:40:55 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.02"
[Fri May 18 01:14:46 2012] fullrun_mos1_xmm0123100201_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 18 01:14:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0123100201_pi300-10000_cl_pass1_src1.csv
[Fri May 18 01:14:46 2012] fullrun_mos1_xmm0123100201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 18 01:14:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0123100201_pi300-10000_cl_pass1_src1.csv
[Fri May 18 01:14:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0123100201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0123100201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 01:14:46 2012] fullrun_mos1_xmm0123100201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 18 01:14:46 2012] fullrun_mos1_xmm0123100201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 18 01:14:46 2012] Fit fullrun_mos1_xmm0123100201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri May 18 02:33:27 2012] Spatial fit model total counts = 23907.200000, observed total counts = 23866.000000
[Fri May 18 02:33:27 2012] Offset between fit and detection position for source 2 = 0.094092 pixels
[Fri May 18 02:33:27 2012] 23889.270000 total counts/ 4793.570000 bgd. counts: snr = 275.807484
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.094092 pixels
  Position = (308.8, 321.9) = 7 44 4.46 74 33 58.7
  Extent = 5.5 (5.5-5.6)", rotation angle = 0
  Source counts = 19095.7 +/- 154.6
  Background counts = 4793.6
  Rate = 1 +/- 0.008
[Fri May 18 02:33:27 2012] Vigneting correction estimate = 1.000000
[Fri May 18 02:33:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 02:33:27 2012] Assessing source extent using major axis lower bound
[Fri May 18 02:33:27 2012] Source does appear to be extended
[Fri May 18 02:33:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 07:01:37 2012] Counts = 19095.700000, rescaling region sizes by 3.000000
[Fri May 18 07:01:37 2012] XMMSAS src. selection expression = ellipse(26820.589540, 27956.877000, 998.285429, 998.285429, 0.000000, X, Y)
[Fri May 18 07:01:37 2012] Writing source region out to fullrun_mos1_xmm0123100201_pi300-10000_pass1_cl_src2_src.reg
[Fri May 18 07:01:37 2012] Extracting stamp from image fullrun_mos1_xmm0123100201_pi300-10000_cl_sm2.00.img.gz, (251, 265) - (366, 379)
[Fri May 18 07:01:37 2012] XMMSAS bgd. selection expression = annulus(26820.589540, 27956.877000, 4991.427144, 9982.854287, X, Y) && !ellipse(27805.975220, 38751.410492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36724.154907, 18936.564438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27199.851600, 36349.808400, 443.640013, 443.640013, 0.000000, X, Y) && !ellipse(28033.898865, 20662.810059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25232.669800, 25124.910000, 1116.912032, 502.736814, 111.770000, X, Y)
[Fri May 18 07:01:37 2012] Writing fullrun_mos1_xmm0123100201_pi300-10000_pass1_cl_src2.gif
[Fri May 18 07:01:44 2012] Mean detx,y = (480.90, -176.06) 
[Fri May 18 07:01:47 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 07:08:20 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 07:08:21 2012] Setting source spectrum file to fullrun_mos1_xmm0123100201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri May 18 07:08:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0123100201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri May 18 08:21:36 2012] Updating aperture counts using extracted products
[Fri May 18 08:21:36 2012] Error reading totcts from fullrun_mos1_xmm0123100201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri May 18 08:21:37 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 08:21:37 2012] Using photon index=1.80, rate=0.965, arf fullrun_mos1_xmm0123100201_pi300-10000_pass1_cl_src2.arf
[Fri May 18 08:21:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 08:21:37 2012] Updating source flux to 8.6e-12
[Fri May 18 08:22:03 2012] Reading fit data from xmm0123100201/analysis//spectral/fullrun_mos1_xmm0123100201_pi300-10000_pass1_cl_src2_pl.csv
[Fri May 18 08:22:03 2012] Spectral fit parameter nH value = 4.71005e+20
[Fri May 18 08:22:03 2012] Spectral fit parameter PhoIndex value = 2.36733
[Fri May 18 08:22:03 2012] Failed to get F(0.3-8.0) from xmm0123100201/analysis//spectral/fullrun_mos1_xmm0123100201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri May 18 08:22:03 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 08:22:03 2012] Using Nh = 4.7e+20, photon index=2.37, rate=0.965, arf fullrun_mos1_xmm0123100201_pi300-10000_pass1_cl_src2.arf
[Fri May 18 08:22:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 08:22:03 2012] Updating source flux to 7.2e-12