[Fri Sep  7 22:11:16 2012] Detection parameters:
  Position = (255.5, 379.7) = 7 45 2.80 74 38 11.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 166.6 +/- 20.1
  Background counts = 86.3
  Rate = 0.004 +/- 0.0005

[Fri Sep  7 22:11:17 2012] Off-axis axis estimate = 6.67'
[Fri Sep  7 23:59:16 2012] Using EEF radius (= 9.76 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 23:59:16 2012] Initial guess for spatial extent in simple fitting = 9.76"
[Fri Sep  7 23:59:16 2012] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.830
[Fri Sep  7 23:59:16 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 9.76"
[Sat Sep  8 00:36:47 2012] fullrun_mos2_xmm0123100101_pi300-10000_cl_pass0_src10.ximg exists
[Sat Sep  8 00:36:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123100101_pi300-10000_cl_pass0_src10.csv
[Sat Sep  8 00:36:47 2012] fullrun_mos2_xmm0123100101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat Sep  8 00:36:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123100101_pi300-10000_cl_pass0_src10.csv
[Sat Sep  8 00:36:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0123100101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0123100101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  8 00:36:47 2012] fullrun_mos2_xmm0123100101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat Sep  8 00:36:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123100101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Sep  8 00:36:47 2012] fullrun_mos2_xmm0123100101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Sep  8 00:36:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0123100101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Sep  8 00:36:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0123100101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0123100101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  8 00:37:01 2012] Source 12 is offset by 2.885864 and -7.247990 pixels which is larger than
2 X fitted extent = 1.121963 x 1.121963, not incorporating fit results
[Sat Sep  8 00:37:01 2012] Vigneting correction estimate = 1.000000
[Sat Sep  8 00:37:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  8 00:37:01 2012] Assessing source extent using major
[Sat Sep  8 00:37:01 2012] Source does appear to be extended
[Sat Sep  8 00:37:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  8 02:24:20 2012] Using EEF radius (= 9.76 ")to estimate initial spatial extent for simple fitting
[Sat Sep  8 02:24:20 2012] Initial guess for spatial extent in simple fitting = 9.76"
[Sat Sep  8 02:24:20 2012] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.830
[Sat Sep  8 02:24:20 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 9.76"
[Sat Sep  8 02:42:03 2012] fullrun_mos2_xmm0123100101_pi300-10000_cl_pass1_src10.ximg exists
[Sat Sep  8 02:42:03 2012] fullrun_mos2_xmm0123100101_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Sep  8 02:42:03 2012] Fit fullrun_mos2_xmm0123100101_pi300-10000_cl_pass1_src10 appears to have run properly
[Sat Sep  8 02:42:03 2012] fullrun_mos2_xmm0123100101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Sep  8 02:42:03 2012] fullrun_mos2_xmm0123100101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Sep  8 02:42:03 2012] Fit fullrun_mos2_xmm0123100101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Sep  8 02:42:14 2012] Spatial fit model total counts = 595.933000, observed total counts = 553.000000
[Sat Sep  8 02:42:14 2012] Offset between fit and detection position for source 12 = 0.485328 pixels
[Sat Sep  8 02:42:14 2012] 593.663000 total counts/ 484.773000 bgd. counts: snr = 4.945598
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.485328 pixels
  Position = (255.0, 379.8) = 7 45 3.32 74 38 11.1
  Extent = 7.9 (5.9-10.6)" x 4.1 (3.0-5.4)", rotation angle = 352 (332-8) degrees
  Source counts = 108.9 +/- 24.4
  Background counts = 484.8
  Rate = 0.002 +/- 0.0005
[Sat Sep  8 02:42:14 2012] Vigneting correction estimate = 1.000000
[Sat Sep  8 02:42:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  8 02:42:14 2012] Assessing source extent using major axis lower bound
[Sat Sep  8 02:42:14 2012] Source does appear to be extended
[Sat Sep  8 02:42:14 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.09
[Sat Sep  8 03:22:12 2012] XMMSAS src. selection expression = ellipse(22136.951542, 32997.522540, 471.038414, 244.774807, 352.232132, X, Y)
[Sat Sep  8 03:22:12 2012] Writing source region out to fullrun_mos2_xmm0123100101_pi300-10000_pass1_cl_src12_src.reg
[Sat Sep  8 03:22:12 2012] Extracting stamp from image fullrun_mos2_xmm0123100101_pi300-10000_cl_sm2.00.img.gz, (228, 353) - (282, 407)
[Sat Sep  8 03:22:12 2012] XMMSAS bgd. selection expression = annulus(22136.951542, 32997.522540, 785.064023, 1570.128045, X, Y)
[Sat Sep  8 03:22:12 2012] Writing fullrun_mos2_xmm0123100101_pi300-10000_pass1_cl_src12.gif
[Sat Sep  8 03:33:31 2012] Mean detx,y = (3949.10, 5908.59) 
[Sat Sep  8 03:33:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Sep  8 03:33:39 2012] grppha failed
[Sat Sep  8 03:33:39 2012] Setting source spectrum file to fullrun_mos2_xmm0123100101_pi300-10000_pass1_cl_src12_src.pi.gz
[Sat Sep  8 03:33:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0123100101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sat Sep  8 03:37:10 2012] Updating aperture counts using extracted products
[Sat Sep  8 03:37:10 2012] Error reading totcts from fullrun_mos2_xmm0123100101_pi300-10000_pass1_cl_src12_src.pi.gz
[Sat Sep  8 03:37:11 2012] No arf file for this source, not re-computing flux
[Sat Sep  8 03:37:13 2012] Flag b found in src. 12 procflags, skipping spectral fitting
[Sat Sep  8 03:37:13 2012] Source 12 has no response, skipping
[Sat Sep  8 03:37:14 2012] xmm0123100101/analysis//spectral/fullrun_mos2_xmm0123100101_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete