[Fri Sep  7 22:10:59 2012] Detection parameters:
  Position = (409.2, 480.8) = 7 42 13.58 74 45 30.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 244.6 +/- 20.8
  Background counts = 56.7
  Rate = 0.004 +/- 0.0003

[Fri Sep  7 22:10:59 2012] Off-axis axis estimate = 15.47'
[Fri Sep  7 23:31:10 2012] Using EEF radius (= 14.16 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 23:31:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep  7 23:31:10 2012] Initial guess for spatial extent in simple fitting = 14.16"
[Fri Sep  7 23:31:10 2012] source mask rpix=3.3, npix_max = 56, mask sum = 55, frac = 0.975
[Fri Sep  7 23:31:10 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 14.16"
[Fri Sep  7 23:59:16 2012] fullrun_mos1_xmm0123100101_pi300-10000_cl_pass0_src7.ximg exists
[Fri Sep  7 23:59:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0123100101_pi300-10000_cl_pass0_src7.csv
[Fri Sep  7 23:59:16 2012] fullrun_mos1_xmm0123100101_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Sep  7 23:59:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0123100101_pi300-10000_cl_pass0_src7.csv
[Fri Sep  7 23:59:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0123100101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0123100101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 23:59:16 2012] fullrun_mos1_xmm0123100101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Sep  7 23:59:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0123100101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Fri Sep  7 23:59:16 2012] fullrun_mos1_xmm0123100101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Sep  7 23:59:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0123100101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Fri Sep  7 23:59:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0123100101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0123100101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  8 00:36:58 2012] Spatial fit model total counts = -11.126200, observed total counts = 594.000000
[Sat Sep  8 00:36:58 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Sep  8 00:36:58 2012] Vigneting correction estimate = 1.000000
[Sat Sep  8 00:36:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  8 00:36:58 2012] Assessing source extent using major
[Sat Sep  8 00:36:58 2012] Source does appear to be extended
[Sat Sep  8 00:36:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  8 01:44:25 2012] Using EEF radius (= 14.16 ")to estimate initial spatial extent for simple fitting
[Sat Sep  8 01:44:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep  8 01:44:25 2012] Initial guess for spatial extent in simple fitting = 14.16"
[Sat Sep  8 01:44:25 2012] source mask rpix=3.3, npix_max = 56, mask sum = 55, frac = 0.975
[Sat Sep  8 01:44:25 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 14.16"
[Sat Sep  8 02:24:20 2012] fullrun_mos1_xmm0123100101_pi300-10000_cl_pass1_src7.ximg exists
[Sat Sep  8 02:24:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0123100101_pi300-10000_cl_pass1_src7.csv
[Sat Sep  8 02:24:20 2012] fullrun_mos1_xmm0123100101_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat Sep  8 02:24:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0123100101_pi300-10000_cl_pass1_src7.csv
[Sat Sep  8 02:24:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0123100101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0123100101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  8 02:24:20 2012] fullrun_mos1_xmm0123100101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat Sep  8 02:24:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0123100101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sat Sep  8 02:24:20 2012] fullrun_mos1_xmm0123100101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Sep  8 02:24:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0123100101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sat Sep  8 02:24:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0123100101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0123100101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  8 02:42:11 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 19.432498 pixels away
[Sat Sep  8 02:42:11 2012] Vigneting correction estimate = 1.000000
[Sat Sep  8 02:42:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  8 02:42:11 2012] Assessing source extent using major
[Sat Sep  8 02:42:11 2012] Source does appear to be extended
[Sat Sep  8 02:42:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  8 03:17:47 2012] XMMSAS src. selection expression = ellipse(35552.286041, 41778.327087, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Sep  8 03:17:47 2012] Writing source region out to fullrun_mos1_xmm0123100101_pi300-10000_pass1_cl_src7_src.reg
[Sat Sep  8 03:17:47 2012] Extracting stamp from image fullrun_mos1_xmm0123100101_pi300-10000_cl_sm2.00.img.gz, (372, 443) - (447, 518)
[Sat Sep  8 03:17:47 2012] XMMSAS bgd. selection expression = annulus(35552.286041, 41778.327087, 1087.500000, 2175.000000, X, Y)
[Sat Sep  8 03:17:47 2012] Writing fullrun_mos1_xmm0123100101_pi300-10000_pass1_cl_src7.gif
[Sat Sep  8 03:21:41 2012] Mean detx,y = (12799.94, 10435.22) 
[Sat Sep  8 03:21:42 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Sep  8 03:21:53 2012] grppha failed
[Sat Sep  8 03:21:53 2012] Setting source spectrum file to fullrun_mos1_xmm0123100101_pi300-10000_pass1_cl_src7_src.pi.gz
[Sat Sep  8 03:21:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0123100101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Sep  8 03:22:12 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Sep  8 03:22:12 2012] rmf not generated due to insufficient counts
[Sat Sep  8 03:37:10 2012] Updating aperture counts using extracted products
[Sat Sep  8 03:37:10 2012] Error reading totcts from fullrun_mos1_xmm0123100101_pi300-10000_pass1_cl_src7_src.pi.gz
[Sat Sep  8 03:37:10 2012] No arf file for this source, not re-computing flux
[Sat Sep  8 03:37:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Sep  8 03:37:13 2012] xmm0123100101/analysis//spectral/fullrun_mos1_xmm0123100101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete