[Fri Aug 17 08:17:32 2012] Detection parameters:
  Position = (145.0, 320.9) = 18 33 33.06 -10 32 48.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 500.9 +/- 31.1
  Background counts = 34.6
  Rate = 0.03 +/- 0.002

[Fri Aug 17 08:17:32 2012] Off-axis axis estimate = 11.24'
[Fri Aug 17 10:10:46 2012] Using EEF radius (= 12.05 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 10:10:46 2012] Initial guess for spatial extent in simple fitting = 12.05"
[Fri Aug 17 10:10:46 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.842
[Fri Aug 17 10:10:46 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 12.05"
[Fri Aug 17 11:30:12 2012] fullrun_mos2_xmm0122700301_pi300-10000_cl_pass0_src4.ximg exists
[Fri Aug 17 11:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0122700301_pi300-10000_cl_pass0_src4.csv
[Fri Aug 17 11:30:13 2012] fullrun_mos2_xmm0122700301_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Aug 17 11:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0122700301_pi300-10000_cl_pass0_src4.csv
[Fri Aug 17 11:30:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0122700301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0122700301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 11:30:13 2012] fullrun_mos2_xmm0122700301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Aug 17 11:30:13 2012] fullrun_mos2_xmm0122700301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Aug 17 11:30:13 2012] Fit fullrun_mos2_xmm0122700301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Aug 17 11:30:34 2012] Warning, spatial fit 4 centroid is now closest to src. 17
[Fri Aug 17 11:30:34 2012] Source 6 is offset by -4.305550 and -0.143460 pixels which is larger than
2 X fitted extent = 2.118938 x 2.118938, not incorporating fit results
[Fri Aug 17 11:30:34 2012] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 10.207915 pixels away
[Fri Aug 17 11:30:34 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 11:30:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 11:30:34 2012] Assessing source extent using major
[Fri Aug 17 11:30:34 2012] Source does appear to be extended
[Fri Aug 17 11:30:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 14:33:25 2012] Using EEF radius (= 12.05 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 14:33:25 2012] Initial guess for spatial extent in simple fitting = 12.05"
[Fri Aug 17 14:33:25 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.842
[Fri Aug 17 14:33:25 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 12.05"
[Fri Aug 17 15:46:51 2012] fullrun_mos2_xmm0122700301_pi300-10000_cl_pass1_src4.ximg exists
[Fri Aug 17 15:46:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0122700301_pi300-10000_cl_pass1_src4.csv
[Fri Aug 17 15:46:51 2012] fullrun_mos2_xmm0122700301_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Aug 17 15:46:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0122700301_pi300-10000_cl_pass1_src4.csv
[Fri Aug 17 15:46:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0122700301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0122700301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 15:46:52 2012] fullrun_mos2_xmm0122700301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Aug 17 15:46:52 2012] fullrun_mos2_xmm0122700301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Aug 17 15:46:52 2012] Fit fullrun_mos2_xmm0122700301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Aug 17 15:47:06 2012] Spatial fit model total counts = 2523.140000, observed total counts = 2530.000000
[Fri Aug 17 15:47:06 2012] Offset between fit and detection position for source 6 = 5.955097 pixels
[Fri Aug 17 15:47:06 2012] 2548.163000 total counts/ 989.923000 bgd. counts: snr = 49.526044
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 5.955097 pixels
  Position = (142.9, 315.3) = 18 33 33.69 -10 33 12.9
  Extent = 24.1 (22.3-48.2)", rotation angle = 0
  Source counts = 1558.2 +/- 50.5
  Background counts = 989.9
  Rate = 0.06 +/- 0.002
[Fri Aug 17 15:47:06 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 15:47:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 15:47:06 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 15:47:06 2012] Source does appear to be extended
[Fri Aug 17 15:47:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 15:47:06 2012] Source is confused with source 3
[Fri Aug 17 17:35:57 2012] Counts = 1558.240000, rescaling region sizes by 2.000000
[Fri Aug 17 17:35:57 2012] XMMSAS src. selection expression = ellipse(12384.729600, 27385.986000, 2891.760083, 2891.760083, 0.000000, X, Y)
[Fri Aug 17 17:35:57 2012] Writing source region out to fullrun_mos2_xmm0122700301_pi300-10000_pass1_cl_src6_src.reg
[Fri Aug 17 17:35:57 2012] Extracting stamp from image fullrun_mos2_xmm0122700301_pi300-10000_cl_sm2.00.img.gz, (0, 149) - (309, 482)
[Fri Aug 17 17:35:57 2012] XMMSAS bgd. selection expression = annulus(12384.729600, 27385.986000, 9639.200277, 19278.400555, X, Y) && !ellipse(12383.625000, 26288.501400, 3361.176097, 3361.176097, 0.000000, X, Y) && !ellipse(14095.802000, 24772.376000, 481.229614, 481.229614, 0.000000, X, Y) && !ellipse(22263.535187, 32075.721649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13791.991165, 27090.043915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22235.980140, 23407.173600, 444.270413, 444.270413, 0.000000, X, Y) && !ellipse(13691.672211, 27786.256317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17620.741211, 31769.718903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24591.706482, 32323.887238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12119.488647, 24763.821411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13346.061737, 25018.584747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13094.808000, 23314.312000, 1924.920055, 1924.920055, 0.000000, X, Y) && !ellipse(20962.028000, 16737.989800, 3441.728099, 3441.728099, 0.000000, X, Y) && !ellipse(10206.177628, 27543.018463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17529.336517, 38835.370483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28710.033936, 8274.660408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10666.639359, 28640.238525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9722.381508, 26057.064941, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 17 17:35:57 2012] Writing fullrun_mos2_xmm0122700301_pi300-10000_pass1_cl_src6.gif
[Fri Aug 17 17:43:22 2012] Mean detx,y = (-12335.93, -1581.35) 
[Fri Aug 17 17:43:24 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 17:48:46 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 17:48:46 2012] Setting source spectrum file to fullrun_mos2_xmm0122700301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Aug 17 17:48:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0122700301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Aug 17 18:32:51 2012] Updating aperture counts using extracted products
[Fri Aug 17 18:32:51 2012] Error reading totcts from fullrun_mos2_xmm0122700301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Aug 17 18:32:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 18:32:51 2012] Using photon index=1.80, rate=0.0553, arf fullrun_mos2_xmm0122700301_pi300-10000_pass1_cl_src6.arf
[Fri Aug 17 18:32:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 18:32:51 2012] Updating source flux to 8.3e-13
[Fri Aug 17 18:34:22 2012] Flag b found in src. 6 procflags, skipping spectral fitting
[Fri Aug 17 18:34:22 2012] Flag c found in src. 6 procflags, skipping spectral fitting