[Fri Aug 17 08:17:32 2012] Detection parameters:
  Position = (142.7, 302.9) = 18 33 33.76 -10 34 6.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22966.4 +/- 182.8
  Background counts = 36.3
  Rate = 2 +/- 0.01

[Fri Aug 17 08:17:32 2012] Off-axis axis estimate = 11.30'
[Fri Aug 17 10:10:46 2012] Using EEF radius (= 12.08 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 10:10:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 17 10:10:46 2012] Initial guess for spatial extent in simple fitting = 12.08"
[Fri Aug 17 10:10:46 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.978
[Fri Aug 17 10:10:46 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.08"
[Fri Aug 17 11:30:12 2012] fullrun_mos2_xmm0122700301_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug 17 11:30:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0122700301_pi300-10000_cl_pass0_src1.csv
[Fri Aug 17 11:30:12 2012] fullrun_mos2_xmm0122700301_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug 17 11:30:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0122700301_pi300-10000_cl_pass0_src1.csv
[Fri Aug 17 11:30:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0122700301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0122700301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 11:30:13 2012] fullrun_mos2_xmm0122700301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug 17 11:30:13 2012] fullrun_mos2_xmm0122700301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug 17 11:30:13 2012] Fit fullrun_mos2_xmm0122700301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug 17 11:30:34 2012] Warning, spatial fit 1 centroid is now closest to src. 16
[Fri Aug 17 11:30:34 2012] Source 3 is offset by 6.466061 and -0.875760 pixels which is larger than
2 X fitted extent = 1.464694 x 1.464694, not incorporating fit results
[Fri Aug 17 11:30:34 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.216414 pixels away
[Fri Aug 17 11:30:34 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 11:30:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 11:30:34 2012] Assessing source extent using major
[Fri Aug 17 11:30:34 2012] Source does appear to be extended
[Fri Aug 17 11:30:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 14:33:25 2012] Using EEF radius (= 12.08 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 14:33:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 17 14:33:25 2012] Initial guess for spatial extent in simple fitting = 12.08"
[Fri Aug 17 14:33:25 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.978
[Fri Aug 17 14:33:25 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.08"
[Fri Aug 17 15:46:51 2012] fullrun_mos2_xmm0122700301_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 17 15:46:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0122700301_pi300-10000_cl_pass1_src1.csv
[Fri Aug 17 15:46:51 2012] fullrun_mos2_xmm0122700301_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 17 15:46:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0122700301_pi300-10000_cl_pass1_src1.csv
[Fri Aug 17 15:46:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0122700301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0122700301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 15:46:52 2012] fullrun_mos2_xmm0122700301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 17 15:46:52 2012] fullrun_mos2_xmm0122700301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 17 15:46:52 2012] Fit fullrun_mos2_xmm0122700301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug 17 15:47:06 2012] Spatial fit model total counts = 37149.700000, observed total counts = 37161.000000
[Fri Aug 17 15:47:06 2012] Offset between fit and detection position for source 3 = 0.281544 pixels
[Fri Aug 17 15:47:06 2012] 37013.080000 total counts/ 5186.580000 bgd. counts: snr = 441.924766
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.281544 pixels
  Position = (142.9, 302.7) = 18 33 33.69 -10 34 7.7
  Extent = 14.0 (13.9-14.1)", rotation angle = 0
  Source counts = 31826.5 +/- 192.4
  Background counts = 5186.6
  Rate = 1 +/- 0.007
[Fri Aug 17 15:47:06 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 15:47:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 15:47:06 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 15:47:06 2012] Source does appear to be extended
[Fri Aug 17 15:47:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 15:47:06 2012] Source is confused with source 6
[Fri Aug 17 17:35:57 2012] Counts = 31826.500000, rescaling region sizes by 3.000000
[Fri Aug 17 17:35:57 2012] XMMSAS src. selection expression = ellipse(12383.625000, 26288.501400, 2520.882073, 2520.882073, 0.000000, X, Y)
[Fri Aug 17 17:35:57 2012] Writing source region out to fullrun_mos2_xmm0122700301_pi300-10000_pass1_cl_src3_src.reg
[Fri Aug 17 17:35:57 2012] Extracting stamp from image fullrun_mos2_xmm0122700301_pi300-10000_cl_sm2.00.img.gz, (0, 158) - (288, 448)
[Fri Aug 17 17:35:57 2012] XMMSAS bgd. selection expression = annulus(12383.625000, 26288.501400, 12604.410363, 25208.820725, X, Y) && !ellipse(33817.452600, 25049.623600, 809.168023, 809.168023, 0.000000, X, Y) && !ellipse(14095.802000, 24772.376000, 481.229614, 481.229614, 0.000000, X, Y) && !ellipse(12384.729600, 27385.986000, 1927.840055, 1927.840055, 0.000000, X, Y) && !ellipse(22263.535187, 32075.721649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13791.991165, 27090.043915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22235.980140, 23407.173600, 444.270413, 444.270413, 0.000000, X, Y) && !ellipse(13691.672211, 27786.256317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17620.741211, 31769.718903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24591.706482, 32323.887238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12119.488647, 24763.821411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13346.061737, 25018.584747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13094.808000, 23314.312000, 1924.920055, 1924.920055, 0.000000, X, Y) && !ellipse(34779.582000, 23720.488000, 1604.896046, 1604.896046, 0.000000, X, Y) && !ellipse(20962.028000, 16737.989800, 3441.728099, 3441.728099, 0.000000, X, Y) && !ellipse(10206.177628, 27543.018463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17529.336517, 38835.370483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28710.033936, 8274.660408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10666.639359, 28640.238525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9722.381508, 26057.064941, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 17 17:35:57 2012] Writing fullrun_mos2_xmm0122700301_pi300-10000_pass1_cl_src3.gif
[Fri Aug 17 17:36:04 2012] Mean detx,y = (-12311.26, -1440.74) 
[Fri Aug 17 17:36:06 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 17:42:53 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 17:42:53 2012] Setting source spectrum file to fullrun_mos2_xmm0122700301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Aug 17 17:42:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0122700301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Aug 17 18:32:51 2012] Updating aperture counts using extracted products
[Fri Aug 17 18:32:51 2012] Error reading totcts from fullrun_mos2_xmm0122700301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Aug 17 18:32:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 18:32:51 2012] Using photon index=1.80, rate=1.13, arf fullrun_mos2_xmm0122700301_pi300-10000_pass1_cl_src3.arf
[Fri Aug 17 18:32:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 18:32:51 2012] Updating source flux to 1.7e-11
[Fri Aug 17 18:34:22 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Fri Aug 17 18:34:22 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Fri Aug 17 18:36:37 2012] Reading fit data from xmm0122700301/analysis//spectral/fullrun_mos2_xmm0122700301_pi300-10000_pass1_cl_src3_pl.csv
[Fri Aug 17 18:36:37 2012] Spectral fit parameter nH value = 2.15391e+22
[Fri Aug 17 18:36:37 2012] Spectral fit parameter PhoIndex value = 1.89992
[Fri Aug 17 18:36:37 2012] Failed to get F(0.3-8.0) from xmm0122700301/analysis//spectral/fullrun_mos2_xmm0122700301_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri Aug 17 18:36:37 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 18:36:37 2012] Using Nh = 2.2e+22, photon index=1.90, rate=1.13, arf fullrun_mos2_xmm0122700301_pi300-10000_pass1_cl_src3.arf
[Fri Aug 17 18:36:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 18:36:37 2012] Updating source flux to 3.5e-11