[Fri Aug 17 08:17:10 2012] Detection parameters:
  Position = (395.7, 293.9) = 18 32 19.12 -10 34 42.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.9 +/- 19.0
  Background counts = 20.8
  Rate = 0.002 +/- 0.0007

[Fri Aug 17 08:17:10 2012] Off-axis axis estimate = 7.06'
[Fri Aug 17 09:20:16 2012] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 09:20:16 2012] Initial guess for spatial extent in simple fitting = 9.96"
[Fri Aug 17 09:20:16 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.964
[Fri Aug 17 09:20:16 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 9.96"
[Fri Aug 17 10:10:45 2012] fullrun_mos1_xmm0122700301_pi300-10000_cl_pass0_src18.ximg exists
[Fri Aug 17 10:10:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122700301_pi300-10000_cl_pass0_src18.csv
[Fri Aug 17 10:10:45 2012] fullrun_mos1_xmm0122700301_pi300-10000_cl_pass0_src18_1.ximg exists
[Fri Aug 17 10:10:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122700301_pi300-10000_cl_pass0_src18.csv
[Fri Aug 17 10:10:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0122700301_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0122700301_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 10:10:46 2012] fullrun_mos1_xmm0122700301_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Fri Aug 17 10:10:46 2012] fullrun_mos1_xmm0122700301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Fri Aug 17 10:10:46 2012] Fit fullrun_mos1_xmm0122700301_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Fri Aug 17 11:30:26 2012] Source 9 is offset by -3.289757 and -4.113030 pixels which is larger than
2 X fitted extent = 1.121949 x 1.121949, not incorporating fit results
[Fri Aug 17 11:30:26 2012] Spatial fit model total counts = 1074.740000, observed total counts = 1044.000000
[Fri Aug 17 11:30:26 2012] Offset between fit and detection position for source 9 = 8.864822 pixels
[Fri Aug 17 11:30:26 2012] 906.812000 total counts/ 605.087000 bgd. counts: snr = 12.265984
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 8.864822 pixels
  Position = (402.1, 300.0) = 18 32 17.24 -10 34 19.7
  Extent = 19.9 (19.8-39.8)", rotation angle = 0
  Source counts = 301.7 +/- 30.1
  Background counts = 605.1
  Rate = 0.01 +/- 0.001
[Fri Aug 17 11:30:27 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 11:30:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 11:30:27 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 11:30:27 2012] Source does appear to be extended
[Fri Aug 17 11:30:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 12:37:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 17 12:37:51 2012] Initial guess for spatial extent in simple fitting = 19.92"
[Fri Aug 17 12:37:51 2012] source mask rpix=4.6, npix_max = 103, mask sum = 100, frac = 0.969
[Fri Aug 17 12:37:51 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 19.92"
[Fri Aug 17 14:33:25 2012] fullrun_mos1_xmm0122700301_pi300-10000_cl_pass1_src18.ximg exists
[Fri Aug 17 14:33:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122700301_pi300-10000_cl_pass1_src18.csv
[Fri Aug 17 14:33:25 2012] fullrun_mos1_xmm0122700301_pi300-10000_cl_pass1_src18_1.ximg exists
[Fri Aug 17 14:33:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0122700301_pi300-10000_cl_pass1_src18.csv
[Fri Aug 17 14:33:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0122700301_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0122700301_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 14:33:25 2012] fullrun_mos1_xmm0122700301_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Fri Aug 17 14:33:25 2012] fullrun_mos1_xmm0122700301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Fri Aug 17 14:33:25 2012] Fit fullrun_mos1_xmm0122700301_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Fri Aug 17 15:47:01 2012] Source 9 is offset by 3.098943 and 2.032667 pixels which is larger than
2 X fitted extent = 1.121949 x 1.121949, not incorporating fit results
[Fri Aug 17 15:47:01 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 19.868489 pixels away
[Fri Aug 17 15:47:01 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 15:47:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 15:47:01 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 15:47:01 2012] Source does appear to be extended
[Fri Aug 17 15:47:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 16:50:10 2012] XMMSAS src. selection expression = ellipse(34931.986000, 26052.220000, 1194.930034, 1194.930034, 0.000000, X, Y)
[Fri Aug 17 16:50:10 2012] Writing source region out to fullrun_mos1_xmm0122700301_pi300-10000_pass1_cl_src9_src.reg
[Fri Aug 17 16:50:10 2012] Extracting stamp from image fullrun_mos1_xmm0122700301_pi300-10000_cl_sm2.00.img.gz, (333, 231) - (471, 369)
[Fri Aug 17 16:50:10 2012] XMMSAS bgd. selection expression = annulus(34931.986000, 26052.220000, 1991.550057, 3983.100115, X, Y) && !ellipse(33861.993500, 25011.498474, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 17 16:50:10 2012] Writing fullrun_mos1_xmm0122700301_pi300-10000_pass1_cl_src9.gif
[Fri Aug 17 17:08:27 2012] Mean detx,y = (-1696.93, -10119.23) 
[Fri Aug 17 17:08:28 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 17:09:08 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 17:09:08 2012] Setting source spectrum file to fullrun_mos1_xmm0122700301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Aug 17 17:09:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0122700301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Aug 17 18:32:51 2012] Updating aperture counts using extracted products
[Fri Aug 17 18:32:51 2012] Error reading totcts from fullrun_mos1_xmm0122700301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Aug 17 18:32:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 18:32:51 2012] Using photon index=1.80, rate=0.0108, arf fullrun_mos1_xmm0122700301_pi300-10000_pass1_cl_src9.arf
[Fri Aug 17 18:32:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 18:32:51 2012] Updating source flux to 1.9e-13
[Fri Aug 17 18:32:53 2012] Flag b found in src. 9 procflags, skipping spectral fitting